OPB817 Datasheet PDF - ETC
| Part Number | OPB817 | |
| Description | Slotted Op tical Switch | |
| Manufacturers | ETC | |
| Logo |  |
|
|
There is a preview and OPB817 download ( pdf file ) link at the bottom of this page. Total 2 Pages | ||
Preview 1 page No Preview Available !
Product Bulletin OPB817
February 2001
Slotted Optical Switch
Type OPB817
Features
• .20”(5.08 mm) wide gap
• 24”minimum, 26 AWG wire leads
•Dust protection
• .86”(21.8 mm) deep slot
Description
The OPB817 consists of an infrared
emitting diode and an NPN silicon
phototransistor mounted in an opaque
housing with clear windows for dust
protection. The extended deep slot
allows for a longer reach of the optical
center line from the mounting plane, .90”
(22.86 mm).
Internal apertures are .010”x 0.06”for
the phototransistor “S side”and .050”x
.06”for the LED “E side”.
Custom electrical, wire or cabling is
available. Contact your local
representative or Optek for more
information.
Visit our website at www.optekinc.com
or email us at [email protected]
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . . -40°C to +80°C
Input Diode
Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (1 µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . . 3.0 A
Reverse DC Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1)
Output Phototransistor
Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Emitter-Collector Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V
Collector DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1)
NOTES:
(1) Derate linearly 1.67 mW/°C above 25°C.
(2) All parameters tested using pulse technique.
(3) Clear dust protection.
PRECAUTIONS: Exposure of the plastic body to chlorinated hydrocarbons and ketones such as
thread lock and instant adhesive products will degrade the plastic body. Cleaning agents
methanol and isopropanol are recommended. Spray or wipe do not submerge.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
29
(972) 323-2200
Fax (972) 323-2396
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for OPB817 electronic component. |
| Information | Total 2 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ OPB817.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| OPB810 | The function is Wide Gap Slotted Optical Switch. OPTEK |  |
| OPB810L | The function is WIDE GAP SLOTTED OPTICAL SWITCHES. OPTEK | |
| OPB810W | The function is WIDE GAP SLOTTED OPTICAL SWITCHES. OPTEK | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
OPB8
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||