|
|
|
부품번호 | OPT101P 기능 |
|
|
기능 | MONOLITHIC PHOTODIODE AND SINGLE-SUPPLY TRANSIMPEDANCE AMPLIFIER | ||
제조업체 | Burr-Brown Corporation | ||
로고 | |||
전체 11 페이지수
® OPT101
MONOLITHIC PHOTODIODE AND
SINGLE-SUPPLY TRANSIMPEDANCE AMPLIFIER
FEATURES
q SINGLE SUPPLY: +2.7 to +36V
q PHOTODIODE SIZE: 0.090 x 0.090 inch
q INTERNAL 1MΩ FEEDBACK RESISTOR
q HIGH RESPONSIVITY: 0.45A/W (650nm)
q BANDWIDTH: 14kHz at RF = 1MΩ
q LOW QUIESCENT CURRENT: 120µA
q AVAILABLE IN 8-PIN DIP, 5-PIN SIP, AND
8-LEAD SURFACE MOUNT PACKAGES
APPLICATIONS
q MEDICAL INSTRUMENTATION
q LABORATORY INSTRUMENTATION
q POSITION AND PROXIMITY SENSORS
q PHOTOGRAPHIC ANALYZERS
q BARCODE SCANNERS
q SMOKE DETECTORS
q CURRENCY CHANGERS
(Pin available
on DIP only.)
2
V+
(2) 1
3pF
1MΩ
8pF
4 (4)
7.5mV
5 (5)
λ VB
OPT101
(1) 8 (3) 3
(SIP)
DIP
DESCRIPTION
The OPT101 is a monolithic photodiode with on-chip
transimpedance amplifier. Output voltage increases
linearly with light intensity. The amplifier is designed
for single or dual power supply operation, making it
ideal for battery operated equipment.
The integrated combination of photodiode and
transimpedance amplifier on a single chip eliminates
the problems commonly encountered in discrete de-
signs such as leakage current errors, noise pick-up and
gain peaking due to stray capacitance. The 0.09 x 0.09
inch photodiode is operated in the photoconductive
mode for excellent linearity and low dark current.
The OPT101 operates from +2.7V to +36V supplies
and quiescent current is only 120µA. It is available in
clear plastic 8-pin DIP, 5-pin SIP and J-formed DIP for
surface mounting. Temperature range is 0°C to 70°C.
SPECTRAL RESPONSIVITY
0.7
Ultraviolet
Infrared
0.6
0.7
0.6
0.5
Using Internal
0.4 1MΩ Resistor
0.5
0.4
0.3 0.3
0.2 0.2
0.1 0.1
00
200 300 400 500 600 700 800 900 1000 1100
Wavelength (nm)
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111
Internet: http://www.burr-brown.com/ • FAXLine: (800) 548-6133 (US/Canada Only) • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
©1994 Burr-Brown Corporation
PDS-11257D
OPT101Printed in U.S.A. March, 1998
®
PIN CONFIGURATIONS
Top View
VS 1
8 Common
–In 2
7 NC
(1)
–V 3
6 NC
1MΩ Feedback 4
5 Output
NOTE: (1) Photodiode location.
Top View
Common
VS
–V
1MΩ Feedback
Output
1
2
3
4
5
(1)
DIP
SIP
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VS to “Common” or pin 3) ................................ 0 to +36V
Output Short-Circuit (to ground) ............................................... Continuous
Operating Temperature ..................................................... –25°C to +85°C
Storage Temperature ........................................................ –25°C to +85°C
Junction Temperature ...................................................................... +85°C
Lead Temperature (soldering, 10s) ................................................ +300°C
(Vapor-Phase Soldering Not Recommended)
PACKAGE INFORMATION
PRODUCT
OPT101P
OPT101P-J
OPT101W
COLOR
PACKAGE
PACKAGE DRAWING
NUMBER(1)
Clear
Clear
Clear
8-Pin Plastic DIP
8-Lead Surface Mount (2)
5-Pin Plastic SIP
006-1
006-4
321
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix C of Burr-Brown IC Data Book. (2) 8-pin DIP with J-formed
leads for surface mounting.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with ap-
propriate precautions. Failure to observe proper handling and
installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
MOISTURE SENSITIVITY
AND SOLDERING
Clear plastic does not contain the structural-enhancing fillers
used in black plastic molding compound. As a result, clear
plastic is more sensitive to environmental stress than black
plastic. This can cause difficulties if devices have been stored
in high humidity prior to soldering. The rapid heating during
soldering can stress wire bonds and cause failures. Prior to
soldering, it is recommended that plastic devices be baked-out
at +85°C for 24 hours.
The fire-retardant fillers used in black plastic are not compat-
ible with clear molding compound. The OPT101 plastic
packages cannot meet flammability test, UL-94.
®
OPT101
4
4페이지 TYPICAL PERFORMANCE CURVES (CONT)
At TA = +25°C, VS = +2.7V to +36V, λ = 650nm, internal 1MΩ feedback resistor, and RL = 10kΩ, unless otherwise noted.
SMALL SIGNAL RESPONSE
LARGE SIGNAL RESPONSE
SMALL SIGNAL RESPONSE (CLOAD = 10,000 pF)
(Pin 3 = 0V)
SMALL SIGNAL RESPONSE (CLOAD = 10,000 pF)
(Pin 3 = –15V)
®
7 OPT101
7페이지 | |||
구 성 | 총 11 페이지수 | ||
다운로드 | [ OPT101P.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
OPT101 | OPT101 Monolithic Photodiode and Single-Supply Transimpedance Amplifier (Rev. B) | Texas Instruments |
OPT101 | MONOLITHIC PHOTODIODE AND SINGLE-SUPPLY TRANSIMPEDANCE AMPLIFIER | Burr-Brown Corporation |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |