|
|
|
부품번호 | P300G 기능 |
|
|
기능 | GENERAL PURPOSE PLASTIC RECTIFIER | ||
제조업체 | General Semiconductor | ||
로고 | |||
전체 2 페이지수
P300A THRU P300M
GENERAL PURPOSE PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes
DO-201AD
0.210 (5.3)
0.190 (4.8)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ High surge current capability
♦ Typical IR less than 0.1µA
♦ Construction utilizes void-free molded plastic technique
♦ 3.0 Ampere operation at TA=90°C
with no thermal runaway
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.4 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage
at 3.0A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
Typical junction capacitance (NOTE 1)
Typical reverse recovery time (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
SYMBOLS P300A
VRRM 50
VRMS 35
VDC
50
P300B
100
70
100
P300D
200
140
200
P300G P300J
400 600
280 420
400 600
P300K
800
560
800
P300M
1000
700
1000
UNITS
Volts
Volts
Volts
I(AV) 3.0 Amps
IFSM
200.0
Amps
VF
IR
CJ
trr
RΘJA
RΘJL
TJ, TSTG
1.2
5.0
25.0
30.0
2.0
20.0
5.0
-50 to +150
Volts
µA
pF
µs
°C/W
°C
NOTES:
(1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
with 0.8” x 0.8” (20 x 20mm) copper heatsinks
4/98
| |||
구 성 | 총 2 페이지수 | ||
다운로드 | [ P300G.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
P3000AA61 | solid state crowbar devices | Teccor Electronics |
P3002A | solid state crowbar devices | Teccor Electronics |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |