DataSheet.es    


PDF CS8818 Data sheet ( Hoja de datos )

Número de pieza CS8818
Descripción Interface and Interconnect USB
Fabricantes Myson Technology 
Logotipo Myson Technology Logotipo



Hay una vista previa y un enlace de descarga de CS8818 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! CS8818 Hoja de datos, Descripción, Manual

CS8818
General Purpose USB2.0-to-ATAPI Bridge Controller with
Embedded PHY
FEATURES
• Fully compatible with USB specification 2.0
- Support full-speed (12M bits/sec) or
high-speed (480M bits/sec) devices with
multiple configurations and multiple interfaces
- Support all USB standard commands,
including suspend and resume detection logic
- Support USB 2.0 TEST mode features
• Supports 5 endpoints
- All endpoints share one on-chip 4K bytes SRAM
buffer and the size of each endpoint is
• Firmware to support ATAPI
CD-ROM/CD-RW/DVD-ROM/DVD-RW is
provided
• 12MHz external clock input to provide better
EMI
• Low power with operation voltage 3.3V with 5V
tolerance I/O pads
• Available in 64-pin LQFP (10mm x 10mm)
production package and 128-pin QFP (14mm x
20mm) development package
configurable
- Default control endpoints (EP0) with up to
GENERAL DESCRIPTION
64-byte buffer on either TX or RX direction
The CS8818 is a single chip USB (Universal Serial Bus)
- An interrupt OUT endpoint (EP1) and an
2.0 Mass storage class peripheral controller intended for
interrupt IN endpoint (EP2)
use with standard ATAPI devices. The device consists of
- A bulk OUT endpoint (EP3) and a bulk IN
a USB 2.0 PHY and SIE, FIFO buffers, embedded
endpoint (EP4): up to 512 bytes data payload for microprocessor with expanded external program
full/high speed bulk endpoint
ROM/Flash memory, and ATAPI compatible interface.
- Unused endpoint can be disabled
• Embedded USB 2.0 transceiver
The CS8818 uses 12MHz crystal to reduce the EMI
- Integrated bit stuffing/unstuffing and stuff
issue. With flexible 32-bit I/O interface, the CS8818
error detection
can be programmed to fit different situations in the
- NRZI (Non-Return-to-Zero Inverted)
USB 2.0 high speed mass storage class applications
encoding/decoding
such as CD-ROM, CD-RW, DVD-R and DVD-RW, etc.
• USB Mass Storage Class Bulk-Only
Specification Compliant (Version 1.0)
• Support Bus Powered and Self Powered modes
• Support multiple LUNs
• Automatic detection of Master or Slave ATAPI
devices
• Support true ATAPI compatible interface
- Complies with ATAPI-7 Specification (PIO
mode 0,3,4, Multiword DMA mode 0~2,
UDMA mode 0~6)
- 8-bit/16-bit Standard PIO mode interface
- 16-bit Multiword DMA mode and UDMA mode
w interface (Ultra 133)
• ATAPI bus can be shared with other devices
w • Embedded 8-bit microprocessor with on-chip 8K
w x 14 program ROM and optional external 16K x
14 program ROM/Flash memory
.D• Flexible 32-bit I/O interfaces providing maximum
versatility with ROM mask changeable firmware
ataSheet4Myson Century, Inc.
UTaiwan:
No. 2, Industry East Rd. III,
.Science-Based Industrial Park, Hsin-Chu, Taiwan
comTel: 886-3-5784866 Fax: 886-3-5784349
USA:
4020 Moorpark Avenue, Suite 115
San Jose, CA, 95117
Tel: 408-243-8388 Fax: 408-243-3188
www.myson.com.tw
Rev. 1.0 April 2003
page 1 of 41

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet CS8818.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CS881616-Bit LED DriverChiplus
Chiplus
CS8818Interface and Interconnect USBMyson Technology
Myson Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar