|
|
PDF DG407 Data sheet ( Hoja de datos )
| Número de pieza | DG407 | |
| Descripción | Single 16-Channel/Differential 8-Channel / CMOS Analog Multiplexers | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DG407 (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
Single 16-Channel/Differential 8-Channel, CMOS
Analog Multiplexers
DG406, DG407
The DG406 and DG407 monolithic CMOS analog multiplexers
are drop-in replacements for the popular DG506A and DG507A
series devices. They each include an array of sixteen analog
switches, a TTL and CMOS compatible digital decode circuit for
channel selection, a voltage reference for logic thresholds, and
an ENABLE input for device selection when several multiplexers
are present.
These multiplexers feature lower signal ON-resistance (<100Ω)
and faster transition time (tTRANS < 300ns) compared to the
DG506A and DG507A. Charge injection has been reduced,
simplifying sample and hold applications.
The improvements in the DG406 series are made possible by
using a high voltage silicon-gate process. An epitaxial layer
prevents the latch-up associated with older CMOS technologies.
The 44V maximum voltage range permits controlling 30VP-P
signals when operating with ±15V power supplies.
The sixteen switches are bilateral, equally matched for AC or
bidirectional signals. The ON-resistance variation with analog
signals is quite low over a ±5V analog input range.
Features
• ON-Resistance (Max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100Ω
• Low Power Consumption (PD) . . . . . . . . . . . . . . . . . . <1.2mW
• Fast Transition Time (Max) . . . . . . . . . . . . . . . . . . . . . . . 300ns
• Low Charge Injection
• TTL, CMOS Compatible
• Single or Split Supply Operation
• Pb-Free (RoHS Compliant)
Applications
• Battery Operated Systems
• Data Acquisition
• Medical Instrumentation
• Hi-Rel Systems
• Communication Systems
• Automatic Test Equipment
Related Literature
• Technical Brief TB363 “Guidelines for Handling and Processing
Moisture Sensitive Surface Mount Devices (SMDs)”
ANALOG
INPUTS
DG406
MUX
BUFFER
ADC
CPU
FIGURE 1. TYPICAL APPLICATION
80
70
+125°C
60
+85°C
50
+25°C
40
0°C
30 -40°C
20 -55°C
10 V+ = 15V
V- = -15V
0
-15 -10
-5
0
5 10
VD , DRAIN VOLTAGE (V)
FIGURE 2. ±15 DUAL SUPPLY rON CURVES AT VARIOUS
TEMPERATURES
15
October 1, 2013
FN3116.11
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2000, 2004, 2006, 2009, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1 page  
DG406, DG407
Absolute Maximum Ratings
V+ to V-. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.0V
GND to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V
Digital Inputs, VS, VD (Note 6)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(V-) -2V to (V+) +2V or 20mA,
Whichever Occurs First
Continuous Current (Any Terminal) . . . . . . . . . . . . . . . . . . . . . . . . . 30mA
Peak Current, S or D
(Pulsed 1ms, 10% Duty Cycle Max) . . . . . . . . . . . . . . . . . . . . . . . . . 100mA
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Thermal Information
Thermal Resistance (Typical, Note 5)
θJA (°C/W)
PDIP Package*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
60
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . .+150°C
Maximum Storage Temperature Range . . . . . . . . . . . . . .-65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
*Pb-free PDIPs can be used for through-hole wave solder processing only.
They are not intended for use in Reflow solder processing applications.
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
5. θJA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
6. Signals on SX, DX, EN or AX exceeding V+ or V- are clamped by internal diodes. Limit diode current to maximum current ratings.
Electrical Specifications Test Conditions: V+ = +15V, V- = -15V, VAL = 0.8V, VAH = 2.4V Unless Otherwise Specified. Bold-face limits
apply over the operating temperature range, -40°C to +85°C.
PARAMETER
DYNAMIC CHARACTERISTICS
Transition Time, tTRANS
TEST CONDITIONS
(See Figure 3)
Break-Before-Make Interval, tOPEN
(See Figure 5)
Enable Turn-ON Time, tON(EN)
(See Figure 4)
Enable Turn-OFF Time, tOFF(EN)
Charge Injection, Q
OFF-Isolation, OIRR
Logic Input Capacitance, CIN
Source OFF Capacitance, CS(OFF)
Drain OFF Capacitance, CD(OFF)
DG406
DG407
Drain ON Capacitance, CD(ON)
DG406
DG407
DIGITAL INPUT CHARACTERISTICS
Logic High Input Voltage, VINH
Logic Low Input Voltage, VINL
Logic High Input Current, IAH
Logic Low Input Current, IAL
ANALOG SWITCH CHARACTERISTICS
Drain-Source ON-Resistance, rDS(ON)
CL = 1nF, VS = 0V, RS = 0Ω
VEN = 0V, RL = 1kΩ,
f = 100kHz (Note 11)
f = 1MHz
VEN = 0V, VS = 0V, f = 1MHz
VEN = 0V, VD = 0V, f = 1MHz
VEN = 5V, VD = 0V, f = 1MHz
VA = 2.4V, 15V
VEN = 0V, 2.4V, VA = 0V
VD = ±10V, IS = +10mA
(Note 9)
rDS(ON) Matching Between Channels, ΔrDS(ON) VD = 10V, -10V (Note 10)
TEMP
(°C)
25
Full
25
Full
25
Full
25
Full
25
25
25
25
25
25
25
25
Full
Full
Full
Full
25
Full
25
MIN
(Notes 7, 12)
-
-
25
10
-
-
-
-
-
-
-
-
-
-
-
-
2.4
-
-1
-1
-
-
-
TYP
(Note 8)
200
-
50
-
150
-
70
-
40
-69
7
8
160
80
180
90
-
-
-
-
50
-
5
MAX
(Notes 7, 12)
300
400
-
-
200
400
150
300
-
-
-
-
-
-
-
-
-
0.8
1
1
100
125
-
UNITS
ns
ns
ns
ns
ns
ns
ns
ns
pC
dB
pF
pF
pF
pF
pF
pF
V
V
µA
µA
Ω
Ω
%
5 FN3116.11
October 1, 2013
5 Page 
DG406, DG407
Die Characteristics
DIE DIMENSIONS:
2490µm x 4560µm x 485µm
METALLIZATION:
Type: SiAl
Thickness: 12kÅ ±1kÅ
Metallization Mask Layout
PASSIVATION:
Type: Nitride
Thickness: 8kÅ ±1kÅ
WORST CASE CURRENT DENSITY:
9.1 x 104 A/cm2
DG407
DB
V+ DA
V-
S8A
S8B S7A
S7B S6A
S6B S5A
S5B
S4A
S4B S3A
S3B
S2A
S2B
S1A
S1B
GND NC
A2 A1
A0 EN
11 FN3116.11
October 1, 2013
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet DG407.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DG4000 | Function/Arbitrary Waveform Generator Guide Manual |  RIGOL |
| DG401 | Monolithic CMOS Analog Switches | Intersil Corporation |
| DG401 | Improved / Dual / High-Speed Analog Switches |  Maxim Integrated |
| DG402 | Low Power High SPeed CMOS Analog Switch |  ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |