Datasheet.kr   

WD1003 데이터시트 PDF




Western Digital에서 제조한 전자 부품 WD1003은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 WD1003 자료 제공

부품번호 WD1003 기능
기능 User Guide
제조업체 Western Digital
로고 Western Digital 로고


WD1003 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

WD1003 데이터시트, 핀배열, 회로
WD1002
WD1003
WD1002
WD1003
USER’S GUIDE
800-1910 (REV. 4-87)




WD1003 pdf, 반도체, 판매, 대치품
WD1003-WA2 JUMPER SETTINGS
PIN CONNECTS
E2 to E3
E5 to E6
El to E2
E4 to E5
E7 to E8
ES to E9
DESCRIPTION
NOTE
DO NOT MOVE PRIMARY ADDRESS JUMPERS
UNLESS YOUR OPERATING SYSTEM IS CONFIGURED
TO ACCEPT TWO HARD DISK CONTROLLERS.
CERTAIN OPERATING SYSTEMS SUPPORT TWO
CONTROLLERS IN THE SAME SYSTEM. IBM DOS AND
MANY IBM-COMPATIBLE OPERATING SYSTEMS DO
NOT SUPPORT THIS FEATURE.
Standard factory setting. Selects primary addresses.
Standard factory setting. Selects primary addresses.
Selects secondary addresses.
Selects secondary addresses.
Standard factory setting. Supports 360 RPM floppy disk drives.
Jumper in this position selects 300 RPM floppy disk drives.
SOFTWARE INSTALLATION
This section contains instructions for preparing (low level
format, etc.) your operating system to recognize the Western
Digital controller.
1. Insert your system Diagnostic Diskette (or equivalent).
2. Turn on the power
3. Boot diagnostic and select setup option.
4. Set clock etc.
CAUTION
Avoid system damage by consulting your
Technical Reference manual to ensure that your
drive type is supported by your host BIOS drive
tables. Not all AT-compatibles share the same
drive tables as IBM.
5. Select proper drive type. Consult your Technical Refer-
ence Manual for further information on these parameters.
NOTE
Step 6 requires execution of low level formatting. Use of the
IBM Advanced Diagnostic (or similar program for IBM-
compatibles) is necessary since these controllers contain no
on-board Basic Input/Output System (BIOS) ROM.
6. Insert your Advanced Diagnostic diskette and execute
low level Format. Follow instructions in your reference
manual.
7. Insert System Diagnostic Diskette (or equivalent) after
the system finishes the low level format.
8. Load and execute the FDISK and FORMAT programs.
Follow instructions in your reference manual.
67

4페이지












구       성 총 4 페이지수
다운로드[ WD1003.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
WD1002

User Guide

Western Digital
Western Digital
WD1002-05

Winchester Floppy Controller

Western Digital
Western Digital

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵