Datasheet.kr   

UAA3587 데이터시트 PDF




Philips에서 제조한 전자 부품 UAA3587은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 UAA3587 자료 제공

부품번호 UAA3587 기능
기능 single-package GSM/GPRS/EDGE RF transceiver
제조업체 Philips
로고 Philips 로고


UAA3587 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 2 페이지수

미리보기를 사용할 수 없습니다

UAA3587 데이터시트, 핀배열, 회로
UAA3587 RF SiP
Complete, single-package
GSM/GPRS/EDGE RF transceiver
Integrating passive and active components into a single
package, this complete RF transceiver improves performance
while eliminating 35 external components and enabling an
RF front-end of less than 2.5 cm2.
Semiconductors
Key features
• Advanced, single-package RF transceiver for GSM/GPRS/EDGE
- 30% smaller than previous best-in-class solutions
- Total RF front-end < 2.5 cm2
• Eliminates 35 external components
- Integrated Tx baluns, loop filters, decoupling capacitors
- Integrated Fractional-N RF synthesizer with AFC control
- Semi-integrated 26-MHz oscillator with integrated supply regulator
• Superior performance from optimal process technologies
- 0.25µm QUBiC4 BiCMOS for RF performance
- Passive integration for lower component count
- Flip-chip assembly shortens interconnects, reduces parasitics
• Efficient, flexible architectures
- NZIF receiver architecture
- Direct conversion upmixer transmit architecture
- Triple-output control of RF antenna switches
- Any combination of 3 out of 4 bands (850 / 900 / 1800 / 1900 MHz)
• HVQFN40 package (6 x 6 x 0.85 mm)
The UAA3587, the first Philips System-in-Package (SiP) solution to use a
new silicon-based structure, is a complete RF transceiver for GSM, GPRS,
and EDGE mobile phones. It uses innovative techniques to combine passive
and active components in a single package, maximizing RF performance
while significantly reducing external component count and overall design size.
The SiP uses 35 fewer external RF components than the previous genera-
tion and enables a design area of less than 2.5 cm2 for the complete radio
sub-system. Combined with the miniaturization of other components, the
SiP offers increased RF performance while saving 30% more space than the
previous “best-in-class” solution and 50% more than the industry average.
By replacing dozens of active and passive components in a single, drop-in
solution, the SiP dramatically cuts assembly costs and time-to-market. By
bringing the passive component networks closer together, the SiP shortens
interconnect lengths and reduces parasitics, thereby improving overall RF
performance.
Designed for efficiency, flexibility
The receiver uses a Near Zero-IF (NZIF) architecture.The transmitter uses
a direct-conversion upmixer architecture that delivers -163 dBm/Hz at 20 MHz,
a carrier rejection of greater than 35 dB, and a transmit attenuation range of
40 dB. The RF antenna switches can be controlled by up to three outputs
and the transceiver as a whole can support any combination of 3 out of
4 GSM/GPRS/EDGE bands (850 / 900 / 1800 / 1900 MHz).
The SiP includes integrated Tx baluns, loop filters, and decoupling capaci-
tors.There is an integrated Fractional-N RF synthesizer with AFC control,
as well as a semi-integrated, 26-MHz oscillator clock with integrated supply
regulator.





구       성 총 2 페이지수
다운로드[ UAA3587.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
UAA3580

Wideband code division multiple access frequency division duplex zero IF receiver

Philips
Philips
UAA3587

single-package GSM/GPRS/EDGE RF transceiver

Philips
Philips

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵