|
|
PDF DS1013 Data sheet ( Hoja de datos )
| Número de pieza | DS1013 | |
| Descripción | 3-in-1 Silicon Delay Line | |
| Fabricantes | Dallas Semiconducotr | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DS1013 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
www.dalsemi.com
DS1013
3-in-1 Silicon Delay Line
FEATURES
All-silicon time delay
3 independent buffered delays
Delay tolerance ±2ns for -10 through –60
Stable and precise over temperature and
voltage range
Leading and trailing edge accuracy
Economical
Auto-insertable, low profile
Standard 14-pin DIP, 8-pin DIP, or 16-pin
SOIC
Low-power CMOS
TTL/CMOS-compatible
Vapor phase, IR and wave solderable
Custom delays available
Quick turn prototypes
Extended temperature ranges available
PIN ASSIGNMENT
IN 1 1
NC 2
IN 2 3
NC 4
14 VCC
13 NC
IN 1 1
NC 2
12 OUT 1 NC 3
11 NC
IN 2 4
16 VCC
15 NC
14 NC
13 OUT 1
IN 3
NC
GND
5
6
7
10 OUT 2 NC 5
9 NC
IN 3 6
NC 7
8 OUT 3 GND 8
12 NC
11 OUT 2
10 NC
9 OUT 3
DS1013 14-pin DIP (300-mil) DS1013S 16-pin SOIC
See Mech. Drawings Section
(300-mil)
See Mech. Drawings Section
IN 1
IN 2
IN 3
GND
1
2
3
4
8 VCC
7 OUT 1
6 OUT 2
5 OUT 3
DS1013M 8-pin DIP (300-mil)
See Mech. Drawings Section
PIN DESCRIPTION
IN 1, IN 2, IN 3
- Inputs
OUT 1, OUT 2, OUT 3 - Outputs
GND
- Ground
VCC - +5 Volts
NC - No Connection
DESCRIPTION
The DS1013 series of delay lines has three independent logic buffered delays in a single package. The
devices are offered in a standard 14-pin DIP which is pin-compatible with hybrid delay lines. Alternative
8-pin DIP and surface mount packages are available which save PC board area. Since the DS1013
products are an all silicon solution, better economy is achieved when compared to older methods using
hybrid techniques. The DS1013 series delay lines provide a nominal accuracy of ±2ns for delay times
ranging from 10 ns to 60 ns, increasing to 5% for delays of 150 ns and longer. The DS1013 delay line
reproduces the input logic state at the output after a fixed delay as specified by the dash number extension
of the part number. The DS1013 is designed to reproduce both leading and trailing edges with equal
precision. Each output is capable of driving up to 10 74LS loads. Dallas Semiconductor can customize
standard products to meet special needs. For special requests and rapid delivery, call (972) 371–4348.
1 of 6
111799
1 page  
NOTES:
1. All voltages are referenced to ground.
DS1013
2. Measured with outputs open.
3. VCC = 5V @ 25°C. Delays accurate on both rising and falling edges within ±2 ns for -10 to -60, ±3%
for -70 to 100 and ±5% for -150 and longer delays.
4. See “Test Conditions” section.
5. The combination of temperature variations from 25°C to 0°C or 25°C to 70°C and voltage variations
from 5.0V to 4.75V or 5.0V to 5.25V may produce an additional delay shift of ±1.5 ns or ±3%,
whichever is greater.
6. All output delays tend to vary unidirectionally over temperature or voltage ranges (i.e., if OUT 1
slows down, all other outputs also slow down).
7. Period specifications may be exceeded; however, accuracy will be application-sensitive (decoupling,
layout, etc.).
TERMINOLOGY
Period: The time elapsed between the leading edge of the first pulse and the leading edge of the
following pulse.
tWI (Pulse Width): The elapsed time on the pulse between the 1.5V point on the leading edge and the
1.5V point on the trailing edge, or the 1.5V point on the trailing edge and the 1.5V point on the leading
edge.
tRISE (Input Rise Time): The elapsed time between the 20% and the 80% point on the leading edge of the
input pulse.
tFALL (Input Fall Time): The elapsed time between the 80% and the 20% point on the trailing edge of the
input pulse.
tPLH (Time Delay, Rising): The elapsed time between the 1.5V point on the leading edge of the input
pulse and the 1.5V point on the leading edge of any tap output pulse.
tPHL (Time Delay, Falling): The elapsed time between the 1.5V point on the trailing edge of the input
pulse and the 1.5V point on the trailing edge of any tap output pulse.
5 of 6
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet DS1013.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DS1010 | 10-Tap Silicon Delay Line | Dallas Semiconducotr |
| DS1012 | 2-in-1 Sub-Miniature Silicon Delay Linw |  Dallas Semiconductor |
| DS1013 | 3-in-1 Silicon Delay Line | Dallas Semiconducotr |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |