Datasheet.kr   

HLP190 데이터시트 PDF




ETC에서 제조한 전자 부품 HLP190은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 HLP190 자료 제공

부품번호 HLP190 기능
기능 Range of Hybrid Linear Potentiometers
제조업체 ETC
로고 ETC 로고


HLP190 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 2 페이지수

미리보기를 사용할 수 없습니다

HLP190 데이터시트, 핀배열, 회로
HLP 190
PERFORMANCE
Electrical stroke E
mm
Resistance ±10%
k
Independent linearity
±%
Power dissipation at 20˚C
W
Applied voltage maximum Vdc
Electrical output
Resolution
Phasing between elements
Operational temperature
°C
Output smoothness
Insulation resistance
Operating mode
Wiper circuit impedance
Operating force maximum
gf
Life at 250mm per second
Shaft velocity maximum mm/s
Shaft seal
OPTIONS
Electrical stroke length
Resistance
Independent linearity
Intermediate taps
Upper temperature limit
Radiation hard models
AVAILABILITY
Instruments normally available
from stock
ORDERING CODES
The HLP190 range of hybrid linear potentiometers provides the facility for single
or dual electrical output with a body diameter of only 19mm. Stroke lengths are
from 25mm to 150mm, with a choice of body clamp (BS) or flange (FS)
mounting. This model is supplied with a spring loaded shaft, biased to the fully
extended position. Suited to a wide range of industrial applications for medium
stroke length requirements.
25 50 75 100 125 150
1 23 456
0.25 0.25 0.15 0.15 0.15 0.15
0.5 1.0 1.5 2.0 2.5 3.0
22 44 67 74 74 74
Single or dual - minimum of 0.5% to 99.5% applied volts
Virtually infinite
0.5mm total in retracted position (multi output units)
–30 to +100
To MIL-R-39023 grade C 0.1%
Greater than 100Mat 500Vdc
Voltage divider only - see Circuit Recommendations on page 2
Minimum of 100Mx track resistance or 0.5M(whichever is greater)
450 475 500 525 550 600
6
Typically greater than 50 x 10 cycles at 25mm stroke length
1000
None fitted
Non standard electrical stroke lengths can be specified
500to 5kper 25mm of stroke length
25mm and 50mm stroke to ±0.075%; 75mm stroke upwards to ±0.05%
Can be specified (limited by a maximum of 14 flying leads)
May be extended in certain applications; please discuss with our engineers.
Can be built to special order
HLP190/FS, single electrical output, 25 to 150mm stroke length, standard resistance
BS = Body clamp mounting
with spring shaft
FS = Flange mounting
with spring shaft
Electrical outputs 1 = Single
2 = Dual
Stroke length mm
Resistance
HLP190/..... /..... /..... /.....
HLP190/SA, /BC and /FL models have been superseded by the
new SLS190 range.
Please see separate brochure for details.
Tope Co., Ltd. Tel: (02) 8228-0658 Fax: (02) 8228-0659 e-mail: [email protected] http://www.sensor.com.tw





구       성 총 2 페이지수
다운로드[ HLP190.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
HLP190

Range of Hybrid Linear Potentiometers

ETC
ETC

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵