Datasheet.kr   

E5AF PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 E5AF
기능 Fuzzy Temperature Controller
제조업체 OMRON
로고 OMRON 로고 



전체 9 페이지

		

No Preview Available !

E5AF 데이터시트, 핀배열, 회로
Fuzzy Temperature Controllers
E5AF
1/4 DIN Controller Combines Fuzzy and PID Control
For Fast Response to Process Disturbances
s Advanced PID control provides optimal
response during start-up and steady-
state operation
s Fuzzy and PID control work together to
correct a process upset quickly, with
minimal overshoot
s Fuzzy parameters can be changed to adjust
fuzzy control's impact on the process
s Accuracy to ±0.3% of set value
s Field-selectable temperature ranges, °F/°C
scaling, and sensor input types
s Plug-in outputs for field interchangeability
s Communications function and heater burnout
alarm models available
s 3-year warranty
Ordering Information
s TEMPERATURE CONTROLLERS
Order one control output separately below. For example, E5AF-A02-F with E53-S SSR output unit. For heater burnout models, be sure
to order a current transformer. To order models marked for degrees Celsius, omit the "F" at the end of the part number.
Communications type
None
RS-232C
RS-422
RS-485
BCD
Transmission output (4-20 mA)
Standard
E5AF-A-F
E5AF-A01-F
E5AF-A02-F
E5AF-A03-F
E5AF-A20-F
E5AF-AF-F
Heater burnout type*
E5AF-AH-F
E5AF-AH01-F
E5AF-AH02-F
E5AF-AH03-F
E5AF-AH20-F
E5AF-AHF-F
* Current Output E53-C may not be used with heater burnout type controllers.
s CONTROL OUTPUT UNITS
Output type
Part number
Relay
output*
E53-R
SSR
output
E53-S
Voltage output (for driving SSR)
12 VDC (NPN) 24 VDC (NPN)
E53-Q
E53-Q3
*Note: If control period is less than 5 seconds, use solid state relay or voltage relay.
s CURRENT TRANSFORMERS FOR HEATER-BURNOUT CONTROLLERS
24 VDC (PNP)
E53-Q4
Current
output
E53-C
Hole diameter
Part number
5.8 mm (0.23 in)
E54-CT1
12.0 mm (0.47 in)
E54-CT3
s TEMPERATURE RANGES
Input type
Thermocouple
(switch selectable) Type K
Type J/L
Type T/U Type E Type R
Temperature
°C -200 to 1,300 -100 to 850 -200 to 400 0 to 600 0 to 1,700
range
°F 0399 to 2,300 -100 to 1,500 -300 to 700 0 to 1,100 0 to 3,000
Unit of measure
1° C or F, main setting and alarm
Type S
0 to 1,700
0 to 3,000
Platinum RTD
100
-99.9 to 450.0
-99.9 to 800.0
0.1° C or F, main setting
and alarm




E5AF pdf, 반도체, 판매, 대치품
E5AF
E5AF
SPECIFICATIONS (continued)
Materials
Mounting
Connections
Weight
Enclosure
ratings
Front panel
Rear panel
Terminals
Approvals
UL
CSA
Ambient
Operating
temperature
Storage
Humidity
Insulation resistance
Dielectric strength
Vibration Mechanical durability
Malfunction durability
Shock Mechanical durability
Malfunction durability
Plastic case
Fits 1/4 DIN panel cutouts; includes two panel mounting brackets
Plated steel screw terminals mounted on rear of unit
Approx. 480 g (17 oz.), with communications 530 g (18.7 oz.)
IEC IP50, NEMA 4 with optional cover Y92A-96N
IEC IP20
IEC IP00
Recognized, File Number E68481 (all models)
Certified, File Number LR59623 (all models)
-10° to 55°C (14° to 131°F)
-25° to 65°C (-13° to 149°F)
35 to 85% RH
20 Mminimum at 500 VDC, measured with an output unit installed
2,000 VAC, 50/60 Hz for 1 minute between terminals of different polarity, measured with an
output unit installed
10 to 55 Hz, 0.75 mm (0.03 in) in X, Y, and Z directions for 2 hours each
2 to 5 Hz, 2 G, in X, Y, and Z directions for 10 minutes each
300 m/s2 in 6 directions, 3 times each
200 m/s2 in 6 directions, 3 times each
s COMMUNICATIONS FEATURES
Output type
Transmission method
Maximum cable length
Synchronization method
Transmission rate
Transmission code
Write to controller
functions
Read from controller
functions
System limits
RS-232C
RS-422
RS-485
BCD
4-wire half duplex 4-wire half duplex 2-wire half-duplex Data select code
15 m (49.2 ft)
500 m (1,640 ft) 500 m (1,640 ft) –
Start-stop
Start-stop
Start-stop
150/300/600/1,200/2,400/4,800/9,600 bps
ASCII (7 bits)
Set temperature, alarm value, proportional band,
integral time, rate time, auto-tuning start/stop, fuzzy
intensity, fuzzy scales 1 and 2, heater burnout alarm
set value (E5AF-H)
Set temperature,
alarm value
Set temperature, alarm value, proportional band,
Set temperature,
reset time, rate time, output variable, process value,
alarm value,
fuzzy intensity, fuzzy scales 1 and 2, heater burnout current process value,
and current transformer input value (E5AF-H)
error codes, etc.
Peer-to-peer
A maximum of 32 temperature
controllers can be connected to one
host computer in serial communication
Transmission output
4 to 20 mA DC,
600 max. load
Resolution 1/3200
Write disabled
Process value within
the set limits, output
variable
s CURRENT TRANSFORMERS (for E5AF-H)
Heater current
Weight
Dielectric strength
Vibration
Maximum 50 A continuous service, single-phase
Approx. 11.5 g (0.41 oz.) for E54-CT1; approx. 50 g (1.8 oz.) for E54-CT3
1,000 VAC
50 Hz (approx. 10 G)
4

4페이지










E5AF 전자부품, 판매, 대치품
E5AF
E5AF
s E5AF-H Heater burnout controller without
communications
12. Heater
burnout
indicator
1. Process
value
display
2. Sensor
error
indicator
11. Auto-tuning
indicator
10. Output
indicator
9. Level key
3. Set value
display
4. Alarm
indicator
5. Auto-tuning
key
s E5AF-H Heater burnout controllers with
communications
13. Remote
operation
indicator
14. Remote
key
8. Mode key
7. Down key
6. Up key
15. Front cover
Key Description
1. Process value display shows process temperature and
various messages, including the parameter being
displayed and error codes for troubleshooting.
2. Sensor error indicator lights when a sensor fails or an
error is detected..
3. Set value display shows the set temperature and other
parameters.
4. Alarm indicator lights when alarm output is ON.
5. Auto-tuning key, pressed for at least 1 second, starts the
automatic tuning of PID and fuzzy scale parameters.
Press for more than 1 second during auto-tuning to stop
auto-tuning.
6. Up key increases the temperature settings and other
parameters by one. Pressed for 1 second or more, the
display increments at 50 units in 1 second until the
upper-limit value has been reached.
7. Down key decreases the temperature settings and other
parameters by one. Pressed for 1 second or more, the
display decrements at 50 units in 1 second until the
lower-limit value has been reached.
Key Description
8. Mode key changes the display mode within the display
levels.
9. Level key changes the display level when pressed for at
least 2 seconds.
10. Output indicator lights when the control output is ON
(except when using a current output unit).
11. Auto-tuning indicator flashes at intervals of 1 second
when auto-tuning of PID and fuzzy parameters is in
progress.
12. Heater burnout indicator lights when a heater burnout is
detected and stays lit until reset. Provided on the Heater
Burnout models only.
13. Remote operation indicator lights when the controller is
in remote (on-line) communication mode.
14. Remote key, on models with communications boards
only, selects remote (on-line) mode to enable communi-
cations or local mode to allow manual changes of
settings.
15. Front cover shows display codes inside.
7

7페이지



구       성총 9 페이지
다운로드[ E5AF.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

상호 : 아이지 인터내셔날

사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
E5AF

Fuzzy Temperature Controller

OMRON
OMRON
E5AJ

(E5xJ) Temperature Controller

Omron
Omron

DataSheet.kr    |   2020   |  연락처   |  링크모음   |   검색  |   사이트맵