|
|
Número de pieza | EM4222 | |
Descripción | Read-Only UHF Identification Device | |
Fabricantes | EM Microelectronic | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de EM4222 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
No Preview Available ! EM MICROELECTRONIC - MARIN SA
Preliminary EM4222
Read-only UHF Identification Device
Description
The EM4222 is used in passive UHF read-only
transponder applications. It is powered up by an RF
beam transmitted by the reader, which is received and
rectified to generate a supply voltage for the chip. A pre-
programmed code is transmitted to the reader by varying
the amount of energy that is reflected back to the reader.
It implements a robust and fast anti-collision protocol.
The chip is frequency independent and is to be used for
RF coupled applications. A reading range from 2m to
20m and reading rates up to 120 tags/second can be
achieved, depending upon the system configuration. The
Tag Talk First (TTF) protocol enables very simple reader
implementation.
Features
Factory programmed 64 bit unique ID number
High data rate: Up to 256 kbit/s
Frequency independent: Typically used at 869 MHz,
902 - 928 MHz, 2.45 GHz
On-chip oscillator
On-chip rectifier
Low voltage operation - down to 1.0 V
Low power consumption
Cost effective
-40 to +85°C operating temperature range
Available in die form
Operating Configuration
UHF transponders can be implemented using an
EM4222 chip and an antenna.
Typical Applications
The EM4222 is ideal for applications where long range,
high-speed item identification is required:
Supply chain management (SCM)
Tracking and tracing
Access control
Asset control
Licensing
Auto-tolling
Animal tagging
Sports event timing
A1
EM4222
M2
Pad No Name Function
1 A Negative connection to antenna
2 M Positive connection to antenna
Ordering information for samples
Please make sure to give complete part number when ordering (without spaces between letters).
Part Number
EM4222V1
Data
rate
64k
Max interval Die Form & Thickness
4k Sawn wafer, 11 mils
Bumping
no bumps
EM4222V2
64k 16k Sawn wafer, 11 mils
no bumps
EM4222V3
mEM4222V4
oEM4222V5
256k
256k
256k
4k Sawn wafer, 11 mils
16k Sawn wafer, 11 mils
64k Sawn wafer, 11 mils
no bumps
no bumps
no bumps
u.cFor ICs to be used in mass production, the customer must define its options with the control ROM bit definition. Using this
t4information, EM Microelectronic-Marin S.A. will define a complete new Part Number for ordering.
eProduct Support
heCheck our Web Site under Products/RF Identification section.
sQuestions can be sent to [email protected]
ataCopyright 2003, EM Microelectronic-Marin SA
.dSubject to change without notice
wwwRev. C 04/2003
Phone: +41.32.755-5111, Fax: +41.32.755-5403
www.emmicroelectronic.com
1 page |
Páginas | Total 1 Páginas | |
PDF Descargar | [ Datasheet EM4222.PDF ] |
Número de pieza | Descripción | Fabricantes |
EM4222 | Read-Only UHF Identification Device | EM Microelectronic |
EM4223 | Read-only UHF Radio Frequency Identification Device according to ISO IEC 18000-6 | EM Microelectronic |
EM422Mxxxx-xx | 64Mb SDRAM | Eorex |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |