|
|
|
부품번호 | QFP44 기능 |
|
|
기능 | POD Target Layout | ||
제조업체 | iSYSTEM | ||
로고 | |||
전체 4 페이지수
_
Adapters
V1.2
QFP44 – T_PLCC44 POD target layout
Target CPU package: QFP44
Body size: 10 mm x 10 mm
Pitch: 0.8 mm
POD target layout: T_PLCC44
Can be used with:
• Philips H-8xC52 POD
• Atmel 89C51CC POD
• EH-C513 POD
• 68HC05C9 POD
• 68HC11D3E POD
• 68HC11D3S POD
Note that adapter solutions stated in the document can be used only with listed PODs.
Disregarding this warning may result in hardware failure of the target and the emulation
system.
h Required Adapter Parts (by ordering code):
• IA44TQ-SOLDER
eet4u.comSolder part, which is being soldered to the target.
www.datash iSYSTEM, November 2003
1/4
Phase 3: Connect the POD to the target via IA44PGATQ-FIXED.
It is recommended to use plastic posts (if shipped with the POD), to establish adequate
mechanical stability.
Note that some precaution must be taken to the POD adaptation after the POD is connected to
the target. Otherwise, the part soldered to the target may break off.
h Dimensions
(Unit : mm)
QFP44 (T_PLCC44)
A
41
B CD E
13 20 17 11
iSYSTEM, November 2003
4/4
4페이지 | |||
구 성 | 총 4 페이지수 | ||
다운로드 | [ QFP44.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
QFP44 | POD Target Layout | iSYSTEM |
QFP44 | TET | iSYSTEM |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |