Datasheet.kr   

EM2-DINAV53xxx PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 EM2-DINAV53xxx
기능 Panel Meters and Controllers Power Analyzers and Energy Meters
제조업체 Carlo Gavazzi
로고 Carlo Gavazzi 로고 



전체 6 페이지

		

No Preview Available !

EM2-DINAV53xxx 데이터시트, 핀배열, 회로
mPanel Meters and Controllers
.coPower Analyzers and Energy meters
UType EM2-DIN, Energy Meter
t4 • 6-dgt µP-based indicator
e • Manual scrolling of partial and total energies:
e kWh, kVArh.
h • TRMS measurement of distorted waves (voltage/current)
S • All configuration functions selectable by
ta built-in key-pad
• Password protection of programming parameters
a • Front reset of partial energies
.D • Degree of protection (front): IP 40
• Optional serial RS 422/485 output (provided with
w control relay)
ww • MODBUS, JBUS protocol.
mProduct Description
Ordering Key
oµP-based energy meter with
a built-in configuration key-
.cpad. The energies are both
partial and total counted. The
housing is easy to mount on
DIN-rail and ensures a
degree of protection (front) of
IP 40.
Model
Range code
Measurement
Power supply
Output
EM2-DINAV53D XX
t4UType Selection
eRange code
eAV5: 250/433 VAC - 5 AAC
h(max. 300 V (L-N)/
520 V (L-L) - 6 A)
.DataS1)On request
Measurement
3: One phase,
three-phase system,
3 or 4 wires, balan-
ced load;
three phase system,
3 or 4 wires, unba-
lanced load
Power supply
Output
A: 24 VAC, -15% +10%, XX: No output (standard)
50/60 Hz 1)
XS: Serial output, RS 485
B: 48 VAC, -15%+10%,
multidrop bidirec-
50/60 Hz 1)
tional with control
C: 115 VAC, -15%
relay 1)
+10%, 50/60 Hz 1)
D: 230 VAC, -15%
+10%, 50/60 Hz
(standard)
Input Specifications
wAccuracy (48 to 62 Hz)
(@ 25°C ±5°C, R.H. 60%)
±1% rdg (hour time base):
wAdditional errors
wHumidity
<0.3% f.s., 60% to 90% R.H.
Temperature drift
Display
Decimal point position
±250 ppm/°C
Backlighted LCD, h: 13mm,
6-dgt
Automatic selection accord-
Power supply
Magnetic field
±0.5% RDG, -15 +10% p.s.
< 0.1% f.s. @ 400 A/m
Rated input
Current
Voltage
Insulation
2 inputs (one/three-phase
balanced load)
6 inputs (one/three-phase
unbalanced load)
2 inputs (one/three-phase
balanced load)
4 inputs (one/three-phase
unbalanced load)
among the voltage and the
current inputs: 2000 Vrms;
among the current inputs:
2000 Vrms
Specifications are subject to change without notice (26.10.99)
.comMax. and min. indication
UActive energy
t4Reactive energy
eSampling rate
ing to the counted energy.
Max resolution: 1 Wh/1 VArh
Min. resolution: 1 KWh/1 KVArh
Max. 999999 min. –199999
Max. 999999 min. 0
3 times / second
www.DataShe 1




EM2-DINAV53xxx pdf, 반도체, 판매, 대치품
EM2-DIN
Mode of Operation
Waveform of the signals that can be measured
Figure G
Sine wave, undistorted
Fundamental content 100%
Harmonic content
0%
Arms =
1.1107 I A |
Wiring Diagrams
Single phase input connections
Figure H
Sine wave, indented
Fundamental content 10...100%
Harmonic content
0...90%
Frequency spectrum 3rd to 16th harmonic
Required result: additional error < 1%
Figure I
Sine wave, distorted
Fundamental content 70...90%
Harmonic content
10...30%
Frequency spectrum 3rd to 15th harmonic
Required result: additional error < 0.5%
Fig. 2
Fig. 1
13
5 6 8 9 10 11
13
5 6 8 9 10 11
12 13 15 16 17 18 20 22 24 26
12 13 15 16 17 18 20 22 24 26
L
N
Direct connection
Three phase/3-wire input connections - Balanced loads
Fig. 3
L
N
CT connection
13
5 6 8 9 10 11
13
5 6 8 9 10 11
Fig. 4
12 13 15 16 17 18 20 22 24 26
L1
L2
L3
Direct connection (3-wire system)
12 13 15 16 17 18 20 22 24 26
L1
L2
L3
CT connection (3-wire system)
4 Specifications are subject to change without notice (26.10.99)

4페이지













구       성총 6 페이지
다운로드[ EM2-DINAV53xxx.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

상호 : 아이지 인터내셔날

사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
EM2-DINAV53xxx

Panel Meters and Controllers Power Analyzers and Energy Meters

Carlo Gavazzi
Carlo Gavazzi

DataSheet.kr    |   2020   |  연락처   |  링크모음   |   검색  |   사이트맵