DataSheet39.com

What is AD9514?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "1.6 GHz Clock Distribution IC".


AD9514 Datasheet PDF - Analog Devices

Part Number AD9514
Description 1.6 GHz Clock Distribution IC
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and AD9514 download ( pdf file ) link at the bottom of this page.





Total 29 Pages



Preview 1 page

No Preview Available ! AD9514 datasheet, circuit

1.6 GHz Clock Distribution IC,
Dividers, Delay Adjust, Three Outputs
AD9514
FEATURES
1.6 GHz differential clock input
3 programmable dividers
Divide-by in range from1 to 32
Phase select for coarse delay adjust
2 independent 1.6 GHz LVPECL clock outputs
Additive broadband output jitter 225 fs rms
1 independent 800 MHz/250 MHz LVDS/CMOS clock output
Additive broadband output jitter 300 fs rms/290 fs rms
Time delays up to 10 ns
Device configured with 4-level logic pins
Space-saving, 32-lead LFCSP
APPLICATIONS
Low jitter, low phase noise clock distribution
Clocking high speed ADCs, DACs, DDSs, DDCs, DUCs, MxFEs
High performance wireless transceivers
High performance instrumentation
Broadband infrastructure
ATE
GENERAL DESCRIPTION
The AD9514 features a multi-output clock distribution IC in a
design that emphasizes low jitter and phase noise to maximize
data converter performance. Other applications with demanding
phase noise and jitter requirements also benefit from this part.
There are three independent clock outputs. Two of the outputs
are LVPECL, and the third output can be set to either LVDS or
CMOS levels. The LVPECL outputs operate to 1.6 GHz, and the
third output operates to 800 MHz in LVDS mode and to
250 MHz in CMOS mode.
Each output has a programmable divider that can be set to
divide by a selected set of integers ranging from 1 to 32. The
phase of one clock output relative to another clock output can
be set by means of a divider phase select function that serves as
a coarse timing adjustment.
CLK
CLKB
SYNCB
FUNCTIONAL BLOCK DIAGRAM
RSET
VS
GND
AD9514 LVPECL
/1. . . /32
OUT0
OUT0B
/1. . . /32
/1. . . /32
LVPECL
OUT1
OUT1B
LVDS/CMOS
OUT2
Δt
OUT2B
SETUP LOGIC
VREF S10 S9 S8 S7 S6 S5 S4 S3 S2 S1 S0
Figure 1.
The LVDS/CMOS output features a delay element with three
selectable full-scale delay values (1.5 ns, 5 ns, and 10 ns), each
with 16 steps of fine adjustment.
The AD9514 does not require an external controller for
operation or setup. The device is programmed by means of
11 pins (S0 to S10) using 4-level logic. The programming pins
are internally biased to ⅓ VS. The VREF pin provides a level of
⅔ VS. VS (3.3 V) and GND (0 V) provide the other two logic levels.
The AD9514 is ideally suited for data converter clocking
applications where maximum converter performance is
achieved by encode signals with subpicosecond jitter.
The AD9514 is available in a 32-lead LFCSP and operates from
a single 3.3 V supply. The temperature range is −40°C to +85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
© 2005 Analog Devices, Inc. All rights reserved.

line_dark_gray
AD9514 equivalent
AD9514
TIMING CHARACTERISTICS
CLK input slew rate = 1 V/ns or greater.
Table 3.
Parameter
LVPECL
Output Rise Time, tRP
Output Fall Time, tFP
PROPAGATION DELAY, tPECL, CLK-TO-LVPECL OUT
Divide = 1
Divide = 2 − 32
Variation with Temperature
OUTPUT SKEW, LVPECL
OUT0 to OUT1 on Same Part, tSKP1
Both LVPECL Outputs Across Multiple Parts, tSKP_AB2
Same LVPECL Output Across Multiple Parts, tSKP_AB2
LVDS
Output Rise Time, tRL
Output Fall Time, tFL
PROPAGATION DELAY, tLVDS, CLK-TO-LVDS OUT
Divide = 1
Divide = 2 − 32
Variation with Temperature
OUTPUT SKEW, LVDS
LVDS Output Across Multiple Parts, tSKV_AB2
CMOS
Output Rise Time, tRC
Output Fall Time, tFC
PROPAGATION DELAY, tCMOS, CLK-TO-CMOS OUT
Divide = 1
Divide = 2 − 32
Variation with Temperature
OUTPUT SKEW, CMOS
CMOS Output Across Multiple Parts, tSKC_AB2
LVPECL-TO-LVDS OUT
Output Delay, tSKV_C
LVPECL-TO-CMOS OUT
Output Delay, tSKV_C
DELAY ADJUST (OUT2; LVDS and CMOS)
S0 = 1/3
Zero Scale Delay Time3
Zero Scale Variation with Temperature
Full Scale Time Delay3
Full Scale Variation with Temperature
S0 = 2/3
Zero Scale Delay Time3
Zero Scale Variation with Temperature
Full Scale Time Delay3
Full Scale Variation with Temperature
Min Typ
60
60
Max Unit Test Conditions/Comments
Termination = 50 Ω to VS − 2 V
100 ps
20% to 80%, measured differentially
100 ps
80% to 20%, measured differentially
355 480
395 530
0.5
635 ps
710 ps
ps/°C
−50 0
200
210
1.00 1.25
1.05 1.30
0.9
650
650
1.10 1.45
1.15 1.50
1
+55 ps
125 ps
125 ps
Termination = 100 Ω differential, 3.5 mA
350 ps
20% to 80%, measured differentially
350 ps
80% to 20%, measured differentially
Optional delay off
1.55 ns
1.60 ns
ps/°C
Optional delay off
230 ps
B outputs are inverted; termination = open
865 ps
20% to 80%; CLOAD = 3 pF single-ended
990 ps
80% to 20%; CLOAD = 3 pF single-ended
Optional delay off
1.75 ns
1.80 ns
ps/°C
Optional delay off
300 ps
560 790 950 ps
700 970 1150 ps
0.34
0.20
1.7
−0.38
0.45
0.31
5.9
−1.3
ns
ps/°C
ns
ps/°C
ns
ps/°C
ns
ps/°C
Rev. 0 | Page 4 of 28


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AD9514 electronic component.


Information Total 29 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AD9514.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AD9510The function is 1.2 GHz Clock Distribution IC. Analog DevicesAnalog Devices
AD9511The function is 1.2 GHz Clock Distribution IC. Analog DevicesAnalog Devices
AD9512The function is 1.2 GHz Clock Distribution IC. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AD95     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search