Datasheet.kr   

7704402xx 데이터시트 PDF




Intersil에서 제조한 전자 부품 7704402xx은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 7704402xx 자료 제공

부품번호 7704402xx 기능
기능 (77044xxxx) LOGIC GATE
제조업체 Intersil
로고 Intersil 로고


7704402xx 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 13 페이지수

미리보기를 사용할 수 없습니다

7704402xx 데이터시트, 핀배열, 회로
REVISIONS
omLTR
DESCRIPTION
DATE (YR-MO-DA)
APPROVED
U.cC Convert to standardized military drawing format. Added device type 02.
t4Technical changes in 1.3, 1.4, table I and Table II. Delete CAGE 31019. Add
CAGE 18714. No approved sources for device type 01. Add figure 3. Editorial
echanges throughout.
heD Add device 03. Update boilerplate.
taSE Update boilerplate to MIL-PRF-38535 requirements. - jak
89-07-26
94-03-08
01-03-20
M. A. Frye
Monica L. Poelking
Thomas M. Hess
aF Made change to paragraph 3.5. Update boilerplate to MIL-PRF-38535
.Drequirements. - LTG
05-03-14
Thomas M. Hess
www U.comDevice type 01AX is
inactive for new design
t4as of 1 Oct. 1986
eFIRST PAGE OF THIS DRAWING HAS BEEN CHANGED.
heCURRENT CAGE CODE 67268
SREV
taSHEET
REV
aSHEET
.DREV STATUS
OF SHEETS
wPMIC N/A
wSTANDARD
w omMICROCIRCUIT
.cDRAWING
REV
SHEET
F F F F F F FF F F F F
1 2 3 4 5 6 7 8 9 10 11 12
PREPARED BY
A. J. Foley
CHECKED BY
C. R. Jackson
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil
t4UTHIS DRAWING IS AVAILABLE
FOR USE BY ALL
eDEPARTMENTS
eAND AGENCIES OF THE
hDEPARTMENT OF DEFENSE
ataSAMSC N/A
APPROVED BY
Nelson A. Hauck
DRAWING APPROVAL DATE
77-09-26
REVISION LEVEL
F
w.DDSCC FORM 2233
wwAPR 97
MICROCIRCUIT, DIGITAL, CMOS, NOR
GATES, MONOLITHIC SILICON
SIZE
A
SHEET
CAGE CODE
14933
1 OF 12
77044
5962-E202-05




7704402xx pdf, 반도체, 판매, 대치품
3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are as
specified in table I and shall apply over the full case operating temperature range.
3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical
tests for each subgroup are described in table I.
3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN listed
in 1.2 herein. In addition, the manufacturer's PIN may also be marked as listed in MIL-HDBK-103 (see 6.6 herein).
3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance to
MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a "Q" or "QML" certification mark in
accordance with MIL-PRF-38535 to identify when the QML flow option is used.
3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an
approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DSCC-VA prior to
listing as an approved source of supply shall affirm that the manufacturer's product meets the requirements of MIL-PRF-38535,
appendix A and the requirements herein.
3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided with
each lot of microcircuits delivered to this drawing.
3.8 Notification of change. Notification of change to DSCC-VA shall be required in accordance with MIL-PRF-38535,
appendix A.
3.9 Verification and review. DSCC, DSCC's agent, and the acquiring activity retain the option to review the manufacturer's
facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the
reviewer.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
F
77044
SHEET
4

4페이지










7704402xx 전자부품, 판매, 대치품
TABLE I. Electrical performance characteristics – Continued.
Test Symbol
Test conditions
-55°C TC +125°C
unless otherwise specified
Device Group A
type subgroups
Propagation delay
time, data to
output
tPHL,
tPLH
CL = 50 pF
RL = 200 k
See figure 4
Transition time
tTHL,
tTLH
CL = 50 pF
RL = 200 k
See figure 4
VDD = 5.0 V
VDD = 10.0 V 1/
VDD = 15.0 V 1/
VDD = 5.0 V
VDD = 10.0 V 1/
VDD = 15.0 V 1/
01 9, 10, 11
02 9
10, 11
03 9
10, 11
01 9, 10, 11
02 9
10, 11
03 9
10, 11
01 9, 10, 11
02 9
10, 11
03 9
10, 11
All 9
10, 11
9
10, 11
9
10, 11
Limits
Unit
Min Max
1275.0 ns
300.0
390.0
250.0
375.0
510.0
150.0
195.0
120.0
180.0
360.0
110.0
143.0
90.0
135.0
200.0 ns
300.0
100.0
150.0
80.0
120.0
1/ This condition is guaranteed, if not tested, to the specified limits in table I.
2/ At -55°C this test is performed with VDD = 18 V.
3/ The IOL and IOH tests are tested 100% at +25°C, and guaranteed, if not tested, at +125°C and -55°C.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
F
77044
SHEET
7

7페이지


구       성 총 13 페이지수
다운로드[ 7704402xx.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
7704402xx

(77044xxxx) LOGIC GATE

Intersil
Intersil

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵