|
|
PDF DSP1-xxxxV Data sheet ( Hoja de datos )
| Número de pieza | DSP1-xxxxV | |
| Descripción | (DSP Relays) Power Relay | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DSP1-xxxxV (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
DSP
8 A MINIATURE
POWER RELAY
IN DS RELAY SERIES
DSP RELAYS
DSP1a
20.2
.795
DSP1
11.0
.433
10.5
.413
DSP2a
mm inch
RoHS Directive compatibility information
http://www.nais-e.com/
FEATURES
• Power types added to DS relay series
• High switching capacity:
1a: 8 A 250 V AC /
1a1b, 2a: 5 A 250 V AC
• High sensitivity: 190 mW pick-up
power
• High contact welding resistance
• Latching types available
• High breakdown voltage 3,000 Vrms
between contacts and coil 1,000
Vrms between open contacts
Meeting FCC Part 68
• Sealed types are standard
COMMENTS ABOUT Cd
FREE
We have introduced Cadmium free type
products to reduce the material which is
not good for our environment.
(The suffix “F” should be added to the
part number.)
(Note: The Suffix “F” is required only for
1 Form A 1 Form B contact type.
The 1 Form A and 2 Form A contact type
is originally Cadmium free, the suffix “F”
is not required.)
If you are still using Cadmium containing
parts, which don’t have “F” on the suffix
of the part number, please use Cadmium
free parts from now on. The life of the
Cadmium free products may be shorter
than the Cadmium containing parts
based on the load condition, so please
evaluate the Cadmium free parts with
your actual application before use.
SPECIFICATIONS (at 20°C 68°F)
Contact
Arrangement
1a 1a1b 2a
Contact material
AgSnO2 type
Initial contact resistance, max.
(By voltage drop 6 V DC 1A)
30 mΩ
Nominal switching capacity
8A 250
VAC
5A 30
VDC
5A 250 VAC
5A 30 VDC
Rating
(resistive)
Max. switching power
Max. switching voltage
Max. switching current
2,000 VA
150 W
1,250 VA
150 W
250 V AC, 30 V DC
8A 5A
Min. switching capacity#1
10 mA, 5 V DC
Expected Mechanical
life (min. (at 180 cpm)
operations) Electrical
5×107
105
Coil (polarized) (at 20°C 68°F)
Minimum operating Single side stable
power
2 coil latching
192 mW
192 mW
Nominal operating Single side stable
power
2 coil latching
300 mW
300 mW
Note: All specifications are based on the condition of 25°C 77°F, 50% R.H. unless
otherwise specified.
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as “Initial breakdown voltage” section
*2 Detection current: 10mA
*3 Excluding contact bounce time
*4 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*5 Half-wave pulse of sine wave: 6ms
*6 Detection time: 10µs
*7 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT.
Characteristics
Max. operating speed
Initial insulation resistance*1
Initial
breakdown
voltage*2
Between open contacts
Between contact sets
Between contacts and
coil
Surge voltage between contacts and
coil
Set time*3 (at nominal voltage)
Reset time*3 (at nominal voltage)
Operate time*3 (at nominal voltage)
Release time(without diode)*3
(at nominal voltage)
Temperature rise
Soldering temperature
Shock
Functional*4
resistance Destructive*5
Vibration
resistance
Functional*6
Destructive
Conditions for operation, transport
and storage*7
(Not freezing and condensing at low
temperature)
Unit weight
30 cps. at rated load
Min. 1,000 MΩ at 500 V DC
1,000 Vrms
2,000 Vrms (1a1b, 2a)
3,000 Vrms
Min. 5,000 V
Max. 10 ms (Approx. 5 ms)
Max. 10 ms (Approx. 4 ms)
Max. 10 ms (Approx. 5 ms)
Max. 5 ms (Approx. 4 ms)
Max. 40°C (1a1b type)
Max. 55°C (1a, 2a types)
250°C (10 s) 300°C (5 s),
350°C (3 s)
Min. 196 m/s2 {20 G}
Min. 980 m/s2 {100 G}
117.6 m/s2 {12 G}, 10 to 55 Hz
at double amplitude of 2 mm
205.8 m/s2 {21 G}, 10 to 55 Hz
at double amplitude of 3.5 mm
–40°C to +65°C – 40°F 149°F
Approx. 4.3 g .15 oz
www.DataSheet4U.com
www.DataSheet4U.com
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
www.DataSheet4U.com
1 page  
DSP
6.-(1) Influence of adjacent mounting
(1a type)
Sample: DSP1a-DC12V, 5 pcs.
15
Pick-up voltage
10 A B C
5 A, C
relays
are not
15 energized
Drop-out voltage
A, C
relays
10 are
energized
5
0 5 10
Inter-relay distance ( ), mm
NOTES
Soldering should be done under the
following conditions:
250°C 482°F within 10 s
300°C 572°F within 5 s
350°C 662°F within 3 s
6.-(2) Influence of adjacent mounting
(1a1b type)
Sample: DSP1-DC12V, 5 pcs.
10
8
Pick-up voltage
ABC
6
4 A, C
2
relays
are not
0 energized
0
–2
Drop-out voltage
A, C
relays
–4 are
–6 energized
–8
–10
12 345 6
Inter-relay distance ( ), mm
6.-(3) Influence of adjacent mounting
(2a type)
Sample: DSP2a-DC12V, 5 pcs.
15
Pick-up voltage
10 A B C
5 A, C
relays
are not
15 energized
Drop-out voltage
A, C
relays
10 are
energized
5
0 5 10
Inter-relay distance ( ), mm
For Cautions for Use, see Relay Technical Information .
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet DSP1-xxxxV.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DSP1-xxxxV | (DSP Relays) Power Relay | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |