|
|
|
부품번호 | PX1004 기능 |
|
|
기능 | 82.2 MHz SAW Filter | ||
제조업체 | RF Monolithics | ||
로고 | |||
전체 10 페이지수
www.DataSheet4U.com
®
• Designed for TDMA IS-54 / CDPD IF Applications
• Low Insertion Loss
• Excellent Selectivity
• Hermetic 13.3 X 6.5 mm Surface-Mount Case
• Unbalanced Input and Output
• Complies with Directive 2002/95/EC (RoHS) Pb
PX1004
82.2 MHz
SAW Filter
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Profile
Electrical Characteristics
Characteristic
Nominal Center Frequency
Passband
Insertion Loss at fc
3 dB Passband
Amplitude Ripple over fc ±15 kHz
Group Delay Variation over fc ±10 kHz
Third-Order Intermod. for -20 dBm tones at fc ±60 & 120 kHz
Rejection
fc ±60 kHz
fc -880 kHz to fc -940 kHz
Ultimate
Operating Temperature Range
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
Sym
fC
IL
BW3
GDV
Notes
1
1, 2
1, 2, 3
TA 1
Min
±15
10
65
-20
SM13365-12
Typ
82.200
3
±25
2.5
16
68
65
Max
4.0
1.0
6.0
-95
+70
Units
MHz
dB
kHz
dBP-P
µsP-P
dBm
dB
°C
Impedance Matching to 50 Ω unbalanced
Case Style
Lid Symbolization (YY=year, WW=week) See note 4
External L-C
SM13365-12 13.3 X 6.5 mm Nominal Footprint
RFM PX1004 YYWW
Electrical Connections
Connection
Port 1Hot
Port 1 Gnd Return
Port 2 Hot
Port 2 Gnd Return
Case Ground
Terminals
2
3
8
9
All Others
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature
range with filter soldered to the specified demonstration board with impedance
matching to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nom-
inal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the pass-
band. Rejection in final user application is dependent on PCB layout and exter-
nal impedance matching design. See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and
www.DataSheet4U.com"ENG" or "E" indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject
to change.
6. Either Port 1 or Port 2 may be used for either input or output in the design.
However, impedances and impedance matching may vary between Port 1 and
Port 2, so that the filter must always be installed in one direction per the circuit
design.
7. US and international patents may apply.
8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of
RF Monolithics, Inc.
9. ©Copyright 1999, RF Monolithics Inc.
10. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
PX1004 112904
www.DataSheet4U.com
82.2 MHz
SAW Filter
SM13365-12 Case
12-Terminal Ceramic Surface-Mount Case
13.3 x 6.5 mm Nominal Footprint
Dimension
A
B
C
D
E
H
P
Min
13.08
6.27
Case Dimensions
mm
Nom Max Min
13.31 13.60 0.515
6.50 6.80 0.247
1.91 2.00
1.50
0.79
1.0
2.54
Inches
Nom
0.524
0.256
0.075
0.059
0.031
0.039
0.100
Max
0.535
0.268
0.079
Solder Pad
Termination
Lid
Body
Pb Free
Materials
Au plating 30 - 60 uInches (76.2-152 uM) over 80-
200 uInches (203-508 uM) Ni.
Fe-Ni-Co Alloy Electroless Nickel Plate (8-11%
Phosphorus) 100-200 uInches Thick
Al2O3 Ceramic
Electrical Connections
Connection
Terminals
Port 1 Input or Return
Return or Input
2
3
Port 2 Output or Return
Return or Output
8
9
Ground
All others
Single Ended Operation
Return is ground
Differential Operation
Return is hot
B
32
C
H
D
23
4
5
A
6
7
1 14
P (8 Places)
12 12 5
11 11 6 E (10 Places)
10 10 7
89
TOP VIEW
www.DataSheet4U.com
98
BOTTOM VIEW
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
PX1004 112904
4페이지 7페이지 | |||
구 성 | 총 10 페이지수 | ||
다운로드 | [ PX1004.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
PX1002 | Designed for TDMA IS-54 Receiver IF Applications | RF Monolithics |
PX1004 | 82.2 MHz SAW Filter | RF Monolithics |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |