Datasheet.kr   

STQ-1016 데이터시트 PDF




ETC에서 제조한 전자 부품 STQ-1016은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 STQ-1016 자료 제공

부품번호 STQ-1016 기능
기능 250 - 1000 MHz Direct Quadrature Modulator
제조업체 ETC
로고 ETC 로고


STQ-1016 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 6 페이지수

미리보기를 사용할 수 없습니다

STQ-1016 데이터시트, 핀배열, 회로
www.DataSheet4U.com
Product Description
The Sirenza Microdevices’ STQ-1016 is a direct quadrature
modulator targeted for use in a wide range of communica-
tions systems, including cellular/PCS, GSM, CDMA, TETRA,
and ISM datacom. This device features a wide 250 - 1000
MHz operating frequency band, excellent carrier and side-
band suppression, and a low broadband noise floor.
STQ-1016
250 - 1000 MHz
Direct Quadrature Modulator
The STQ-1016 uses silicon germanium (SiGe) device tech-
nology and delivers a typical output power of -9 dBm with
greater than 60dB IM3 suppression. A digital input shut-down
feature is included that, when enabled, attenuates the output
by 60dB. The device is packaged in an industry standard 16
pin TSSOP with exposed paddle for superb RF and thermal
ground.
16 pin TSSOP with Exposed Ground Pad
Package Footprint: 0.197 x 0.252 inches, (5.0 x 6.4 mm)
Package Height: 0.039 inches (1.0 mm)
PrEoxdceullcetntFceaarrtieurrfeeesdthrough, -38 dBm con-
Functional Block Diagram
BBQP 1
VCC 2
16 BBQN
15 VCC
VEE 3
14 VEE
LOP 4
LON 5
LO
QUADRATURE
GENERATOR
13 RFP
12 RFN
stant over output power
Output P1dB +5dBm
Very low noise floor, -154 dBm/Hz typical
Wide baseband input, DC - 500 MHz
Superb phase accuracy and amplitude bal-
ance, ±0.5 deg./±0.2 dB
Low LO drive requirement, -5 dBm
VEE 6
SD 7
BBIP 8
11 VEE
10 VCC
9 BBIN
Product Specifications – RF Output: TA = 25ºC
ApCpellliuclaart/PioCnS/sGSM/CDMA transceivers
TETRA
GMSK, QPSK, QAM, SSB modulators
Parameters
Test Conditions (see page 2)
Units Min.
Typ.
Max.
RF Frequency Range
MHz 250
1000
Output Power
(baseband input level 600 mVp-p differential)
dBm -12.0
-9
-7
RF Port Return Loss
matched to 50using schematic shown on page 5
dB
>10, 250 to 1000 MHz
>15, 275 to 500 MHz
Output P1dB
(baseband input level 3.8Vp-p differential typical)
dBm +3
+6
Carrier Feedthrough
dBm
-38 -30
Sideband Suppression
dB 34
42
IM3 Suppression
2-tone BB input @ 600mVp-p diff. per tone, 20kHz spacing dB
58
62
Broadband Noise Floor
Quadrature Phase Error
baseband inputs tied to 1.9VDC, -20MHz offset from carrier dBm/Hz
deg
-2
-154
±0.5
+2
I/Q Amplitude Balance
dB -0.2
±0.05
+0.2
Supply Voltage (Vcc)
V +4.75 +5 +5.25
Supply Current
DevicewThwermwal.RDesaisttaancSe hjuencetiotn4-caUse.com
mA
ºC/W
80 86
25
Performance tests and ratings for Sirenza Microdevices' products were performed internally by Sirenza and measured using specific computer systems and/or components and reflect the approximate
performance of the products as measured by those tests. Any difference in circuit implementation, test software, or test equipment may affect actual performance. The information provided herein is
believed to be reliable at press time and Sirenza Microdevices assumes no responsibility for the use of this information. All such use shall be entirely at the user's own risk. Prices and specifications
for Sirenza Microdevices' products are subject to change without notice. Buyers should consult Sirenza Microdevices' standard terms and conditions of sale for Sirenza's limited warranty with regard
to its products. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any product for use in
life-support devices and/or systems. Copyright 2004 Sirenza Microdevices, Inc. All worldwide rights reserved.
303 South Technology Court
Broomfield, CO 80021
Phone: (800) SMI-MMIC
1
http://www.sirenza.com
EDS-102531 Rev A




STQ-1016 pdf, 반도체, 판매, 대치품
www.DataSheet4U.com
Package Dimensions (“16” Package)
Dimensions in inches (mm)
STQ-1016 Direct Quadrature Modulator
SSTTQQ
X1L2O0Z01ZT16Z6IZD
Part #
Lot #
Suggested PCB Pad Layout
0.012
(0.30)
0.049
(1.25)
0.118
(3.0)
0.024
(0.63)
NOTES:
1. PACKAGE BODY SIZES EXCLUDE MOLD FLASH
PROTRUSIONS OR GATE BURRS.
2. TOLERANCE ±.004" (0.1mm) UNLESS OTHERWISE
SPECIFIED.
3. COPLANARITY: .004" (0.1mm)
4. CONTROLLING DIMENSION IS MILLIMETER,
CONVERTED INCH DIMENSIONS ARE NOT
NECESSARILY EXACT.
5. FOLLOWED FROM JEDEC MO-153.
Pin Out Description
Pin #
Function
Description
0.014
(0.35)
0.118
(3.0)
0.028
(0.7)
φ0.010 (0.25) via
0.035
(0.9)
0.272 (6.9)
all units are in inches (mm)
- Indicates metalization - vias connect pad to underlying ground plane
Additional Comments
1
BBQP
Q-channel baseband input, positive terminal Nominal DC bias voltage is 1.9V (biased internally)
2
VCC
Positive supply (+5V)
3
VEE
Ground
4
LOP
Local oscillator input, positive terminal
Nominal DC voltage is 2.0V. Input should be AC-coupled.
5
LON
Local oscillator input, negative terminal
Nominal DC voltage is 2.0V. Input should be AC-coupled.
6
VEE
Ground
7 SD Shut-down control
Logic high = normal operation;
logic low = shut-down enabled.
8
BBIP
I-channel baseband input, positive terminal
Nominal DC bias voltage is 1.9V (biased internally)
9
BBIN
I-channel baseband input, negative terminal Nominal DC bias voltage is 1.9V (biased internally)
10
VCC
Positive supply (+5V)
11
VEE
Ground
12
RFN
RF output, negative terminal
Nominal DC voltage is 2.4V. Output should be AC-coupled.
13
RFP
RF output, positive terminal
Nominal DC voltage is 2.4V. Output should be AC-coupled.
14
VEE
Ground
15
VCC
Positive supply (+5V)
16
BBQN
Q-channel baseband input, negative terminal Nominal DC bias voltage is 1.9V (biased internally)
Absolute Maximum Ratings
Parameters
Value
Unit
Supply Voltage (VCC)
LO, RF Input (LOP, LON, RFP, RFN)
6.0 VDC
+10 dBm
Baseband Min Input Voltage
(BBIP, BBIN, BBQP, BBQN)
0 VDC
Baseband Max Input Voltage
(BBIP, BBIN, BBQP, BBQN)
3
Operawtinwg Twem.pDeraatutreaSheet4U.co-m40 to +85
VDC
ºC
Storage Temperature
-65 to +150
ºC
Operation of this device beyond any one of these limits may
cause permanent damage. For reliable continuous operation the
device voltage and current must not exceed the maximum oper-
ating values specified in the table on page one.
Part Number Ordering Information
Devices/Reel
Part Number
Reel Size
Min.
Max.
STQ-1016
7”
500 1000
Moisture Sensitivity Level 1 - no special handling
required.
Caution: ESD Sensitive
Appropriate precaution in handling, packaging
and testing devices must be observed.
303 South Technology Court
Broomfield, CO 80021
Phone: (800) SMI-MMIC
4
http://www.sirenza.com
EDS-102531 Rev A

4페이지












구       성 총 6 페이지수
다운로드[ STQ-1016.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
STQ-1016

250 - 1000 MHz Direct Quadrature Modulator

ETC
ETC
STQ-1016Z

(STQ-x016Z) Reliability Qualification Report

ETC
ETC

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵