|
|
PDF H1745-xxx Data sheet ( Hoja de datos )
| Número de pieza | H1745-xxx | |
| Descripción | Fixed Oscillators | |
| Fabricantes | MF Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de H1745-xxx (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
FIXED
OSCILLATORS
ECL and PECL
0° to 70°C
FULL SIZE D.I.L
M1700, M2700
M1710, M2710
M1736, M2736
M1744, M2744
M1745, M2745
M1748, M2748
M1900, M1910
M1936, M1944
M1945, M1948
10KH Logic — PECL
MF Electronics’ high speed clock oscillators
for digital and communications applications
are based on 5V PECL logic and are
available in full size (M) and half size (H)
thru-hole packages. Designs in 10KH logic
develop 10 MHz to 210 MHz output, and
are available with 45/55 symmetry. They
can be provided with dual complementary
output at frequencies through 410 MHz.
Frequency stability extends from the high
end at ±20 ppm to ±200 ppm. For superior
performance, see our model 2900s using
ECLPS logic.
Thru-Hole / Gull Wing
10 MHz to 410 MHz
1700 and 2700 – 10KH logic PECL, +5V
1900 – 10KH logic with Enable/Disable, PECL, +5V
The MF PECL oscillators are available
in a variety of common configurations.
Models are full size or half size, in 10 KH
logic, with and without complementary
outputs. Frequencies from 10 MHz
to 410 MHz. Frequency tolerances from
200 ppm to 10 ppm include all effects of
voltage, load and aging.
HALF SIZE D.I.L
H1700, H2700
H1710, H2710
H1736, H2736
H1744, H2744
H1745, H2745
H1748, H2748
H1900, H1910
H1936, H1944
H1945, H1948
PECL OSCILLATORS
10KH Logic 10 MHz thru 210 MHz — 10E Logic 210.1 to 410 MHz
+5 Volt Power on Pin 14
Single
Output
Complementary Enable/Disable
Output
Output
Frequency
Stability
1700
1710
1736*
1744
1745
1748
2700
2710
2736*
2744
2745
2748
1900
1910
1936*
1944
1945
1948
±100 ppm
±200 ppm
±100 ppm
±25 ppm
±50 ppm
±20 ppm
* Guaranteed Superior Symmetry 45/55
All Models above 210 MHz are 10E logic.
• DIL - full size or half size
• Single or dual complementary outputs
• H1900 and M1900 have Enable/Disable, reducing noise
of unwanted frequency and allowing wired OR (to 210 MHz)
• Start up time less than 5 ms.
• Stability options from .02% (200 ppm) to .002% (20 ppm)
• Guaranteed start-up with ramping DC Supply
• Terminating resistor may be internal - consult factory
DOT
DENOTES
PIN 1
.018 ± .001
Pin 1
Pin 14
.800 ± .005
DOT
DENOTES
PIN 1
.200 MAX
.215 MAX
.060 TYP
.008/025 .15 MIN
.300 ± .005
.400
.600 ± .005
.100 ± .005
Pin 7
.300 ±. 005
.500 ± .005
.150
Pin 8 .250 MAX
GLASS INSULATORS (4)
on .48 x .18 ctrs.
.52 MAX
SQUARE
.2 MAX
DOT
DENOTES
PIN 1
.018
.300
.160
.2
MAX
14
.300
85
.018 ± .001
Pin 1
Pin 14
“M” Package
www.DataSheet4U.com
“H” Package
DOT
DENOTES
PIN 1
.800 ± .005
.200 MAX
.270 MAX
.600 ± .005
Pin 7
.520 ± .005
.300 ±. 005
Pin 8
GLASS INSULATORS (4)
on .48 x .18 ctrs.
“M” Package
with Gull Wing
.52 MAX
SQUARE
.200 MAX
.070
.018
.300
+.004
45
.300
+.004
18
Glass Insulators (4)
“H” Package
with Gull Wing
ELECTRONICS
10 Commerce Drive, New Rochelle, NY10801 • 914-576-6570 • Fax: 914-576-6204 • http://www.mfelectronics.com • email:[email protected]
47
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet H1745-xxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| H1745-xxx | Fixed Oscillators | MF Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |