Datasheet.kr   

5962-85514 데이터시트 PDF




Analog Devices에서 제조한 전자 부품 5962-85514은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 5962-85514 자료 제공

부품번호 5962-85514 기능
기능 VOLT REFERENCE
제조업체 Analog Devices
로고 Analog Devices 로고


5962-85514 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 12 페이지수

미리보기를 사용할 수 없습니다

5962-85514 데이터시트, 핀배열, 회로
www.DataSheet4U.com
REVISIONS
LTR
DESCRIPTION
DATE (YR-MO-DA)
A Change to military drawing format. Changes to output adjustment range. Add
conditions for load regulation test at -55°C and +125°C. Change group A
subgroups for load regulation and line regulation tests, and output voltage
temperature coefficient. Add vendor CAGE 64155. Editorial changes
throughout.
B Add vendor CAGE 07933. Add vendor CAGE 54186. Add case outline 2.
Change output voltage temperature coefficient test limits.
C Add device type 02. Editorial changes throughout. Delete vendors CAGEs
54186 and 07933. Add vendor CAGE 1ES66.
D Add class V devices. Replace CAGE 06665 with 24355. Add case outline H
and TABLE IIB. Make changes to 1.2.2 and TABLE II.
E Add radiation hardness assurance requirements. - ro
F Make changes to 1.5, table IIA, 4.4.1b, and output voltage temperature
coefficient test as specified in table I. - ro
G Add device types 03 and 04. Make changes 1.2.2 and to the output voltage
noise test as specified under TABLE I. - ro
H Drawing updated to reflect current requirements. -rrp
88-03-17
89-04-12
92-11-25
97-06-10
98-08-07
00-01-21
01-02-07
05-12-07
APPROVED
M. A. FRYE
M. A. FRYE
M. A. FRYE
R. MONNIN
R. MONNIN
R. MONNIN
R. MONNIN
R. MONNIN
THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
DataSheet4U.com
CURRENT CAGE CODE 67268
DataShee
REV
SHEET
REV
SHEET
REV STATUS
OF SHEETS
REV
SHEET
HHHHHHHHHH
1 2 3 4 5 6 7 8 9 10
PMIC N/A
PREPARED BY
DONALD OSBORNE
STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
CHECKED BY
DANIEL A. DiCENZO
APPROVED BY
N. A. HAUCK
DRAWING APPROVAL DATE
86-03-08
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil
MICROCIRCUIT, LINEAR, RADIATION
HARDENED, +5 VOLT ADJUSTABLE PRECISION
VOLTAGE REFERENCE, MONOLITHIC SILICON
AMSC N/A
DataSheet4U.com
DSCC FORM 2233
APR 97
REVISION LEVEL
H
SIZE
A
SHEET
CAGE CODE
14933
1 OF 10
85514
5962-E061-06
DataSheet4 U .com




5962-85514 pdf, 반도체, 판매, 대치품
www.DataSheet4U.com
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-103 - List of Standard Microcircuit Drawings.
MIL-HDBK-780 - Standard Microcircuit Drawings.
(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or http://assist.daps.dla.mil or
from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of
this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with
MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan. The
modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for
device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified
herein.
3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in
MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M.
3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein.
3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.
3.2.3 Radiation exposure circuit. The radiation exposure circuit shall be as specified on figure 2.
3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the
electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full
et4U.com ambient operating temperature range.
3.4 Electrical test requirements. The electrical testDreaqtuaiSrehmeeent4tsUs.hcaollmbe the subgroups specified in table IIA. The electrical
tests for each subgroup are defined in table I.
DataShee
3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturer's PIN may also be
marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer
has the option of not marking the "5962-" on the device. For RHA product using this option, the RHA designator shall still be
marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be
in accordance with MIL-PRF-38535, appendix A.
3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a "QML" or "Q" as required in
MIL-PRF-38535. The compliance mark for device class M shall be a "C" as required in MIL-PRF-38535, appendix A.
3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535
listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of
compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see
6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this
drawing shall affirm that the manufacturer's product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and
herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein.
3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for
device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.
3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2
herein) involving devices acquired to this drawing is required for any change that affects this drawing.
STANDARD
MICROCIRCUIT DRAWING
DataSheet4U.com DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
DataSheet4 U .com
SIZE
A
REVISION LEVEL
H
85514
SHEET
4

4페이지










5962-85514 전자부품, 판매, 대치품
www.DataSheet4U.com
et4U.com
DataSheet4U.com
DataShee
FIGURE 2. Radiation exposure circuit.
STANDARD
MICROCIRCUIT DRAWING
DataSheet4U.com DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
DataSheet4 U .com
SIZE
A
REVISION LEVEL
H
85514
SHEET
7

7페이지


구       성 총 12 페이지수
다운로드[ 5962-85514.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
5962-85514

VOLT REFERENCE

Analog Devices
Analog Devices
5962-8551401

VOLT REFERENCE

Analog Devices
Analog Devices

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵