|
|
PDF APD-128G064A Data sheet ( Hoja de datos )
| Número de pieza | APD-128G064A | |
| Descripción | Plasma Display Modules | |
| Fabricantes | Vishay Siliconix | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de APD-128G064A (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
APD-128G064A
Vishay Dale
Plasma Display Modules
128 x 64 Graphics Display with
Drive Electronics and TTL Level Data Interface
FEATURES
• TTL level video interface
• Slim profile
• Highly visible for long distance viewing
• Large bright characters
• High contrast
The APD-128G064A DC plasma display offers viewing qualities designers seek such as high contrast, viewing angle of 150°
minimum and excellent readability. Its bright (50 foot lambert minimum) with characters and graphics figures presented in a
pleasing neon orange color against a black background. Plasma is much more readable and eye-pleasing than liquid crystal or
vacuum fluorescent displays and is filterable to red, amber or neutral density.
These plasma display panels are driven in a standard row-column refresh method much like a CRT display. The designer need
only supply TTL level signals for SERIAL DATA, DOT CLOCK, COLUMN LATCH, ROW DATA, ROW CLOCK and DISPLAY
ENABLE. The SERIAL DATA is entered with the DOT CLOCK up to frequencies as high as 8mHz. After a row of 128 pixels is
clocked in, the COLUMN LATCH signal is toggled and the data is latched. At the time the data is latched, the display is briefly
disabled using the DISPLAY ENABLE signal, then the row pointer is advanced with the ROW CLOCK signal. Once each frame
the ROW DATA must be asserted to synchronize the column serial data with the beginning row. The recommended scanning
frequency is approximately 70 Hz, but may be as high as 200 Hz. The high clock rate on the data clock allows for rapid refresh
and maximum access time to the refresh ram.
ELECTRICAL SPECIFICATIONS
Power Required: Typical = 12 watts.
Maximum = 35 watts.
Maximum Current Requirements:
Icc (Vcc logic) - 0.050 Amps.
Isp (Column driver supply) - 0.192 Amps.
Isn (Row driver supply) - 0.192 Amps.
Irw (Row driver logic) - 0.010 Amps.
OPTICAL SPECIFICATIONS
Viewing Area: 12.75" [323.85mm] W x 6.35" [161.29mm] L
Character Array: 21 characters per line, 8 lines of
characters.
Character Size: 0.65" [16.51mm] H x 0.45" [11.43mm] W.
Pixel Size: 0.050" [1.27mm] square.
Pixel Pitch: 0.100" [2.54mm].
Luminance: 50 foot lamberts minimum.
Contrast Ratio: > 20:1.
STANDARD ELECTRICAL SPECIFICATIONS*
DESCRIPTION SYMBOL MIN. TYP. MAX. UNITS
Logic Supply
Anode Supply
Cathode Supply
Cathode Control**
Total + Vsp & - Vsn
Vcc
Vsp
Vsn
Vrw
Vtot
+ 4.5
—
—
+ 10.8
170
+ 5.0
+ 75
- 110
+ 12.0
185
+ 5.5
+ 80
- 125
+ 15.0
205
VDC
VDC
VDC
VDC
VDC
DIMENSIONS in inches [millimeters]
128 x 64 Full Field
Column 1,
Row 1
14.50 [368.30]
7.40 [187.96]
.150
[3.81]
7.825
[198.76]
4.062
[103.17]
.150
[3.81]
.450
[11.43]
Max.
Pin #1
of P1
Center of
Display Area
6.35
[161.29]
7.275
[184.78]
8.125
[206.38]
7.25 [184.15]
12.75 [323.85]
13.775 [349.88]
.487
[12.37]
.888
[22.56]
14.80 [375.92]
1.025
[26.04] .447
4.15
Pin #1
CL [105.41]
of P2
7.40 [187.96]
CL
10.50 [266.70]
.062 [1.575]
PCB
Thickness
CL
± .020
[11.35
± .508]
Logic 1 Input
Vih 2.0 — — VDC
Logic 0 Input
Vil — — 0.8 VDC
*Recommended operating voltages. All maximums are to be
considered absolute maximum.
**Vrw is referenced to Vsn.
ORDERING INFORMATION
DESCRIPTION
PART NUMBER
Display Module with Drivers and TTL Interface ............................................................................................. APD-128G064A
Display Module with Drivers, TTL Interface and On Board DC Converter ................................................. APD-128G064A-1
Data Connector Kit ................................................................................................................................................. 280105-05
Power Connector Kit .............................................................................................................................................. 280108-12
www.vishay.com
2
Document Number: 37009
Revision 08-Nov-00
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet APD-128G064A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| APD-128G064A | Plasma Display Modules | Vishay Siliconix |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |