Datasheet.kr   

ENH050Q1-450 데이터시트 PDF




WEDC에서 제조한 전자 부품 ENH050Q1-450은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 ENH050Q1-450 자료 제공

부품번호 ENH050Q1-450 기능
기능 (ENH050Q1-xxx) Color TFT-LCD Module Features GENERAL DESCRIPTION
제조업체 WEDC
로고 WEDC 로고


ENH050Q1-450 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 21 페이지수

미리보기를 사용할 수 없습니다

ENH050Q1-450 데이터시트, 핀배열, 회로
www.DataSheet4U.com
White Electronic Designs
Display Systems Division
ENH050Q1-320/450/600
ENH050Q1-320/450/600 Color TFT-LCD Module Features
GENERAL DESCRIPTION
Slim, lightweight and compact
Panelview provides optically enhanced solutions to the
standard Sharp LQ5AW136 color active matrix LCD
module. The first enhancement is an index matching
(IM) film lamination to the front surface of the display
polarizer.
The IM film is available in two surface treatments - IM/Clear
and IM/110 (a 10% diffusion).The second enhancement is
the incorporation of a reflective polarizer (RP) to improve
brightness by up to 40%. The third enhancement is
the addition of prism films (RPp) further increasing the
brightness of the display. The module accepts full color
video signals conforming to the NTSC(M) and PAL(G-B)
system standards.
It can withstand an intense environment, the online
dimension is suitable for an automotive display, compact
size, compatible with 2DIN size.
Panelview assumes no responsibility for any damage
resulting from the use of the device which does not
comply with the instructions and the precautions specified
in these specification sheets. Panelview does assume the
responsibility for the warranty of the enhanced product.
FEATURES
Dual mode type. [NTSC(M) and PAL(B-G)
standards]
1. Active area/Outline area=70%
2. Thickness: 16.5mm
3. Mass: 185g (Max)
Built-in video interface circuit and control circuit
responsive to two sets of standard RGB analog
video signals.
Reduced refleciton as a resuld of low reflectance
Black-Matrix and Index Matching (IM) film
lamination. IM is available in two surface
treatments, IM/Clear (glossy) and IM/110 (10%
diffusion).
It is possible to use both the simultaneous and the
independent time sampling.
An external clock mode is available.
Optical viewing angle: wide view angle (6 o'clock
direction.) (Customer can use this module as a 12
o'clock viewing direction type by using a display
rotating function to rotate right/left and up/down
scanning direction electrically.)
This module includes a high luminance edge light
that is excellent at low temperature.
It is possible to use the dimming frequency (PWM)
for backlight.
MBK-PAL enables the 234-scanning lines panel to
CONSTRUCTION AND OUTLINE
display a picture with virtually 273-scanning lines.
TFT-active matrix-LCD drive system with high
contrast.
Outline dimensions of TFT-LCD module: See Fig. 3
The module consists of a TFT-LCD panel, driver
IC's control PWB mounted with electronic circuits,
74,800 pixels (RBG Stripe configurations and full
edge light, frame, front and rear shielding cases.
color) 5" diagonal size.
(Backlight driving DC/AC inverter is not built in the
module.)
MECHANICAL SPECIFICATIONS
Parameter
Display Format
Active Area
Screen Size (Diagonal)
Dot Pitch
Dot Configuration
Outline Dimension (1)
Mass
Specifications
74,800
960 (W) x RGB x 234 (H)
102.2 (W) x 74.8 (H)
13 (5")
0.1065 (W) x 0.3195 (H)
RGB Stripe configuration
126.8 (W) x 89.6 (H) x 16.5 (D)
185 (Max)
Units
pixels
dots
mm
cm
mm
-
mm
g
Note: This measurement is typical, and see Fig. 3 for details.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Original specifications created by Sharp.
August 2003
Rev. 0
1 Display Systems Division • Hillsboro, OR • (503) 690-2460 • www.wedc.com




ENH050Q1-450 pdf, 반도체, 판매, 대치품
White Electronic Designs
Display Systems Division
ENH050Q1-320/450/600
ELECTRICAL CHARACTERISTICS
RECOMMENDED OPERATING CONDITIONS
TFT-LCD PANEL DRIVING SECTION
GND=0V, tA=25°C
Parameter
Symbol
MIN
TYP MAX
Unit
Remarks
Positive power supply voltage
VSH +7.8 +8.0 +8.2
V (1)
Negative power supply voltage
VSL -5.2 -5.0 -4.8
V
Analog input voltage Amplitude
VBS 0.7 1.0 2.0 Vp-p
VI - 0.7 - Vp-p (2)
Input resistor is
over 10kΩ.
DC component
VIDC
-1.0
0
-1.0
V (3)
Digital Input voltage High level
VIH -3.7 - +5.1 V Input resistor is over 10k. (4)
Low level
VIL 0
- +1.0 V
Histeresis
VH 0.4
-
-
V
Digital output voltage High level
VOH +4.0 - +5.5 V Load resister is over 60k. (5)
Low level
VOL 0
- +1.0 V
Output clock
Duty cycle
Drive capability
Duty
IOH
45/55
-
50/50
-
55/45
0.25
- CKC=High (6)
mA VOH=2.6V (7)
IOL -0.28
-
- mA VOL=2.3V
Input horizontal sync.
component
freq.
pulse
width
NTSC
PAL
NTSC
PAL
fH (N)
fH (P)
tHI (N)
tHI (P)
15.13
15.03
4.2
4.2
15.73
15.63
4.7
4.7
16.33
16.23
5.2
5.2
kHz CKC=High
kHz (8)
µs for VBS terminal
µs
rise time
trHI1 -
- 0.5 µs
fall time
tfHI1 -
- 0.5 µs
Input vertical sync.
component
freq.
pulse
width
NTSC
PAL
NTSC
PAL
fV (N)
fV (P)
tVI (N)
tVI (P)
fH/284
fH/344
-
-
fH/262
fH/312
3H
2.5H
fH/258
fH/304
-
-
Hz CKC=High, H=1/fH
Hz (9)
µs for VBS terminal
µs
rise time
trVI1 -
- 0.5 µs
fall time
tfVI1 -
- 0.5 µs
Input clock
frequency
fCLI 18.2 18.9 19.6 MHz SAM=High CKC=Low
fCLI 6.0 6.8 7.6 MHz SAM=Low (10)
High width
tWH 20.0
-
- ns for CK terminal
Low width
tWL 20.0
-
-
ns
rise time
trCLI -
- 5.0 ns
fall time
tfCLI -
- 5.0 ns
Input HSY
(Horizontal sync.)
frequency
fHI
fCLI/1230
fCLI/1200
fCLI/1170
Hz
SAM=High
CKC=Low
fHI
fCLI/465
fCLI/435
fCLI/405
Hz SAM=Low (11)
pulse width
tHI 1.0 4.7 8.4 µs for CK terminal
rise time
trHI1 -
- 0.05 µs
fall time
tfHI1 -
- 0.05 µs
Input VSY
(Vertical sync.)
frequency
pulse width
fVI
tVI (P)
50
fHI/262
fHI/258
1H 3H 5H
Hz (12)
CKC=Low
µs for VSY terminal
rise time
trVI1 -
- 0.5 µs
fall time
tfVI2 -
- 0.5 µs
Data set up time
tSU1 25
-
-
ns (13)
CKC=Low
Data hold time
tHO1 25
-
-
ns
Data set up time
tSU2 1.0
-
-
µs (14)
Data hold time
tHO2 1.0
-
-
µs
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Original specifications created by Sharp.
August 2003
Rev. 0
4 Display Systems Division • Hillsboro, OR • (503) 690-2460 • www.wedc.com

4페이지










ENH050Q1-450 전자부품, 판매, 대치품
White Electronic Designs
Display Systems Division
ENH050Q1-320/450/600
OPTICAL CHARACTERISTICS
tA=25°C
Parameter
Viewing Angle Range
Symbol
θ11
θ12
θ2
Condition
CR>5
Min
60
35
60
Contrast Ratio
CRmax
Optimal
60
Response Time
Rise tr
Fall td
θ = 0°
-
-
Luminance
White Chromaticity
Lamp Life Time
+25’C
Y
x
y
-
IL=6.5mArms
IL=6.5mtVms
IL=6.5mArms
Continuation
240
0.263
0.279
10,000
-30’C -
Intermission
2,000
DC/AC inverter for external connection shown in following. Harison Electric Co., Ltd, HIU-288.
Typ
65
40
65
-
30
50
320
0.313
0.329
-
-
Max
-
-
-
-
60
100
-
0.363
0.379
-
-
Notes:
1. Viewing angle range is defined as follows.
Fig. 1: Definition of Viewing Angle
Unit
° (degree)
° (degree)
° (degree)
-
ms
ms
cd/m2
-
-
hour
time
Remarks
(1,2)
(2,3)
(2,4)
(5)
(6)
(7)
∆θ2
Normal line
∆θ2
∆ θ 12
∆ θ 11
6 o'clock direction
2. Applied voltage conditions:
a. VCDC is adjusted so as to attain maximum contrast ratio.
b. Brightness adjusting voltage (BRT) is open.
c. Input video signal of standard black level and 100% white level.
3. Contrast ratio is defined as follows:
Contrast ratio (CR)=Photodetector output with LCD being "white"
Photodetector output with LCD being "black"
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Original specifications created by Sharp.
August 2003
Rev. 0
7 Display Systems Division • Hillsboro, OR • (503) 690-2460 • www.wedc.com

7페이지


구       성 총 21 페이지수
다운로드[ ENH050Q1-450.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
ENH050Q1-450

(ENH050Q1-xxx) Color TFT-LCD Module Features GENERAL DESCRIPTION

WEDC
WEDC

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵