|
|
|
부품번호 | AC10DSMA 기능 |
|
|
기능 | 10 A RESIN INSULATION TYPE TRIAC | ||
제조업체 | NEC | ||
로고 | |||
전체 6 페이지수
www.DataSheet4U.com
DATA SHEET
THYRISTORS
AC10DSMA,AC10FSMA
10 A RESIN INSULATION TYPE TRIAC
DESCRIPTION
The AC10DSMA and AC10FSMA are resin insulation type
TRIACs with an effective current of 10 A (TC = 85°C).
These products are covered with resin mold on the entire case
and are electrically insulated with electrodes, giving them a
considerable advantage over conventional TRIACs when
mounting on a heatsink board or performing high-density
mounting.
These products features ratings and electrical characteristics
equal to TO-220AB package TRIAC and a high reliability design.
PACKAGE DRAWING (Unit: mm)
10.5 MAX.
7 ±0.2 φ 3.2 ±0.2
4.7 MAX.
3.0 MAX.
1 23
*
FEATURES
• Insulation type TRIAC fully covered with resin on the entire
case other than electrode leads
• Insulation voltage and conduction equal to conventional mica
and polyester film
• Can be replaced with TO-220AB package
• High allowable on-current when using a single unit
0.8 ±0.1
2.54 TYP.
1.3 ±0.2 0.5 ±0.1
1.5 ±0.2
2.54 TYP. TRIAC
1: T1
2: T2
3: Gate
2.5 ±0.1
APPLICATIONS
*: TC test bench-mark
Non-contact switches of motor speed control, heater temperature control, lamp light control
Standard weight: 2 g
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. D13661EJ4V0DS00 (4th edition)
Date Published June 2004 NS CP(K)
Printed in Japan
The mark shows major revised points.
2002
10000
1000
Figure 7. iGT vs. τ CHARACTERISTIC
Mode
I, III, IV
TA = 25˚C
100
10
1
1 10 100 1000
τ - Pulse Width - µs
Figure 9. IH vs. TA CHARACTERISTIC
1000
100
10
1
−20
0 20 40 60 80 100
TA - Ambient Temperature - °C
120
Figure 11. TC vs. IT(RMS) RATING
140
120
100
80
60
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11 12
IT(RMS) - Effective On-state Current - A
AC10DSMA,AC10FSMA
Figure 8. νGT vs. τ CHARACTERISTIC
5
Mode
I, III, IV
TA = 25˚C
4
3
2
1
0
1 10 100 1000
τ - Pulse Width - µs
Figure 10. PT(AV) vs. IT(RMS) CHARACTERISTIC
12
11
10
9
8
7
6
5
4
3
2
1
0
0 1 2 3 4 5 6 7 8 9 10 11 12
IT(RMS) - Effective On-state Current - A
Figure 12. TA vs. IT(RMS) RATING
140
120
100
80
60
40
20
0
0 1.0 2.0
IT(RMS) - Effective On-state Current - A
4 Data Sheet D13661EJ4V0DS
4페이지 | |||
구 성 | 총 6 페이지수 | ||
다운로드 | [ AC10DSMA.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
AC10DSMA | 10 A RESIN INSULATION TYPE TRIAC | NEC |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |