Datasheet.kr   

AN1156 데이터시트 PDF




Maxim Integrated Products에서 제조한 전자 부품 AN1156은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 AN1156 자료 제공

부품번호 AN1156 기능
기능 Low-Cost AC Supply
제조업체 Maxim Integrated Products
로고 Maxim Integrated Products 로고


AN1156 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 3 페이지수

미리보기를 사용할 수 없습니다

AN1156 데이터시트, 핀배열, 회로
www.DataSheet4U.com
MICROPROCESSOR SUPERVISOR CIRCUITS
Jul 29, 2002
Low-Cost AC Supply
The following application note discusses a low-cost solution to implement a
3V, 3.3V or 5V logic supply from AC power. It uses the MAX6330 shunt
regulator which can supply up to 50mA as well as offering a reset output
(power-on reset, POR).
One often needs a low-cost logic supply for powering the MCU and related control circuitry in
"white goods" products such as industrial controllers and sensors. Those applications usually
include 24VAC, 115VAC, or higher levels of AC power for conversion to 3.3V or 5.0V. (The
following circuit suits applications that include 24VAC. With proper safety precautions, it can also
be applied to double-insulated white goods and other products that require a logic supply for
control or monitoring functions.)
The simplest approach for generating low-current logic levels from an AC source is to apply the
rectified and filtered AC input to a high-input-voltage linear regulator. But, power dissipation in
the regulator can be considerable, even for modest load currents. A standard shunt regulator
also dissipates notable power in the limiting resistor. A switching regulator minimizes power
dissipation, but that type may not be practical for cost-sensitive designs.
As an alternative, consider an AC-coupled approach to reduce the power dissipation in linear or
shunt-regulator designs. To transfer energy to the regulator with negligible power loss, use a
coupling capacitor in conjunction with an IC containing a shunt regulator and power-on reset
(Figure 1). Available with 50mA maximum output-current capability in 3.0V, 3.3V, and 5.0V
shunt-voltage versions, IC1 also includes a power-on-reset (POR) function. Because IC1 is an
active shunt (vs. a passive zener diode) one must rectify the AC voltage before applying it.
Typically, a capacitor follows the rectifier to hold the charge during off cycles. As shown, a
simple half wave rectifier is used to save cost.





구       성 총 3 페이지수
다운로드[ AN1156.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
AN1156

Low-Cost AC Supply

Maxim Integrated Products
Maxim Integrated Products

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵