|
|
|
부품번호 | OR3005230W 기능 |
|
|
기능 | Superior return loss performance | ||
제조업체 | PDI | ||
로고 | |||
www.DataSheet4U.com
Preliminary Product Specification
OR3005230W
Si Optical Receiver, 5 – 300MHz, 190mA max. @ 24VDC
FEATURES
• Excellent linearity
• Superior return loss performance
• Extremely low distortion
• Optimal reliability
• Excellent price/performance ratio
• Low noise
• Excellent flatness
OR3005230W
APPLICATION
• 5 to 300 MHz CATV reverse amplifier systems
DESCRIPTION
• Hybrid high dynamic range optical receiver amplifier
module. The module contains a single mode optical
input suitable for wavelengths from 1290 to 1600
nm, a terminal to monitor the PIN diode current and
an electrical output with an impedance of 75 Ω.
Si Optical Receiver
5 – 300MHz
190mA max. @ 24VDC
HANDLING
• Fiberglass optical coupling: maximum tensile strength = 5 N;
minimum bending radius = 35mm.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134)
SYMBOL
f
Pin
ESD
Tstg
Tmb
PARAMETER
frequency range
optical input power (continuous)
ESD sensivity
(human body model; R = 1.5 kΩ, C = 100 pF)
storage temperature
operating mounting base temperature
MIN.
5
-
500
- 40
- 20
MAX.
300
5
+ 85
+ 85
UNIT
MHz
mW
V
°C
°C
CHARACTERISTICS
Table 1: Bandwidth 5 to 300MHz; VB = 24V; Tmb = 30°C; ZL = 75 Ω
SYMBOL
S
SL
FL
S22
EINC
sλ
λ
Itot
PARAMETER
responsivity
slope straight line
flatness straight line
optical input return loss
output return loss
equivalent input noise
spectral sensitivity
optical wavelength
total current
consumption (DC) 5)
CONDITIONS
λ = 1310 nm
f = 5 to 300 MHz
f = 5 to 300 MHz
f = 5 to 300 MHz
f = 10 to 300 MHz
λ = 1310 +- 20 nm
λ = 1550 +- 20 nm
MIN.
850.0
0.0
-
45.0
16.0
0.8
0.90
1290
160
TYP.
0.4
MAX.
1.0
0.6
-
-
7.5
-
-
1600
190
UNIT
V/W
dB
dB
dB
dB
pA/√Hz
A/W
A/W
nm
mA
Page 1 of 4
2005 July 12
Document Revision Level B
Preliminary Product Specification
OR3005230W
Si Optical Receiver, 5 – 300MHz, 190mA max. @ 24VDC
DEFINITIONS
Data Sheet Status
Objective Product
Specification
Preliminary Product
Specification
Product Specification
This data sheet contains target or goal specifications for product
development.
This data sheet contains preliminary data; supplementary data may
be published later.
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134).
Stress above one or more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any other conditions
above those given in the Characteristics sections of the specification is not implied. Exposure to
limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Premier Devices reserves the right to make changes without further notice to any products herein.
Premier Devices makes no warranty representation or guarantee regarding the suitability of its products for any particular
purpose, nor does Premier Devices assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical”
parameters which may be provided in Premier Devices datasheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated
for each customer application by customer´s technical experts. Premier Devices does not convey any license under its
patent rights nor the rights of others. Premier Devices products are not designed, intended, or authorized for use as
components in systems intended for surgical implant into the body, or other applications intended to support or sustain
life, or for any other application in which the failure of the Premier Devices product could create a situation where personal
injury or death may occur. Should Buyer purchase or use Premier Devices products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Premier Devices and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, and claim of personal injury or death associated with such unintended or unauthorized
use, even if such claim alleges that Premier Devices was negligent regarding the design or manufacture of the part.
© Premier Devices Germany GmbH 2005
How to contact us:
Premier Devices Germany GmbH
Loeffelholzstrasse 20, D-90441 Nuernberg, Germany
Phone: +49 (0) 911 9411 233, FAX: +49 (0) 911 9411 198,
Page 4 of 4
2005 July 12
Document Revision Level B
4페이지 | |||
구 성 | 총 4 페이지수 | ||
다운로드 | [ OR3005230W.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
OR3005230W | Superior return loss performance | PDI |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |