|
|
Número de pieza | PE4283 | |
Descripción | SPDT High Power UltraCMOS | |
Fabricantes | Peregrine Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PE4283 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Product Description
The PE4283 RF Switch is designed to cover a broad range
of applications from DC through 4000 MHz. This reflective
switch integrates on-board CMOS control logic with a low
voltage CMOS-compatible control interface, and can be
controlled using either single-pin or complementary control
inputs. The PE4283 operates using a +3 volt power supply.
The PE4283 SPDT High Power RF Switch is manufactured
on Peregrine’s UltraCMOS™ process, a patented variation
of silicon-on-insulator (SOI) technology on a sapphire
substrate, offering the performance of GaAs with the
economy and integration of conventional CMOS.
Figure 1. Functional Diagram
RFC
RF1 RF2
Product Specification
PE4283
SPDT High Power UltraCMOS™
DC – 4.0 GHz RF Switch
Features
• Single-pin or complementary CMOS
logic control inputs
• 1.5 kV ESD tolerance
• Low insertion loss: 0.65 dB at
1000 MHz, 0.70 dB at 2500 MHz
• RFC-RF1/RF2 isolation of 33.5 dB at
1000 MHz, 21.5 dB at 2500 MHz
• RF1-RF2 isolation of 37.5 dB at
1000 MHz, 22 dB at 2500 MHz
• Typical input 1 dB compression point
of +32 dBm
• Ultra-small SC-70 package
Figure 2. Package Type SC-70
6-lead SC-70
CMOS
Control
Driver
V1 V2
Table 1. Electrical Specifications @ +25 °C, VDD = 3 V (ZS = ZL = 50 Ω)
Parameter
Operation Frequency1
Insertion Loss
DC - 4000
1000 MHz
2500 MHz
Conditions
Min
DC
Isolation: RFC - RF1/RF2
1000 MHz
2500 MHz
31.5
19.5
Isolation: RF1 - RF2
Return Loss
‘ON’ Switching Time
‘OFF’ Switching Time
Input 1 dB Compression
Input IP3
1000 MHz
2500 MHz
1000 MHz
2500 MHz
50% CTRL to 0.1 dB of final value, 1 GHz
50% CTRL to 25 dB isolation, 1 GHz
1000 MHz
1000 MHz, 20 dBm input power
35.5
20
30
Typical
0.65
0.70
33.5
21.5
37.5
22
19
16
0.725
0.625
+32
+53
Max
4000
0.75
0.80
1.5
1.3
Units
MHz
dB
dB
dB
dB
dB
dB
dB
dB
µs
µs
dBm
dBm
Note: 1. Device linearity will begin to degrade below 10 MHz.
Document No. 70-0177-04 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 11
1 page PE4283
Product Specification
Typical Performance Data
Figure 7. Insertion Loss @ 25 °C
Figure 8. Insertion Loss @ 3 V
Figure 9. Isolation: RF1-RF2 @ 25 °C
Figure 10. Isolation: RF1-RF2 @ 3 V
Document No. 70-0177-04 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 11
5 Page PE4283
Product Specification
Sales Offices
The Americas
Peregrine Semiconductor Corporation
9450 Carroll Park Drive
San Diego, CA 92121
Tel 858-731-9400
Fax 858-731-9499
Europe
Peregrine Semiconductor Europe
Bâtiment Maine
13-15 rue des Quatre Vents
F- 92380 Garches, France
Tel: +33-1-47-41-91-73
Fax : +33-1-47-41-91-73
Space and Defense Products
Americas:
Tel: 505-881-0438
Fax: 505-881-0443
Europe, Asia Pacific:
180 Rue Jean de Guiramand
13852 Aix-En-Provence cedex 3, France
Tel: +33(0) 4 4239 3361
Fax: +33(0) 4 4239 7227
North Asia Pacific
Peregrine Semiconductor K.K.
5A-5, 5F Imperial Tower
1-1-1 Uchisaiwaicho, Chiyoda-ku
Tokyo 100-0011 Japan
Tel: +81-3-3502-5211
Fax: +81-3-3502-5213
Peregrine Semiconductor, Korea
#B-2402, Kolon Tripolis, #210
Geumgok-dong, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-480 S. Korea
Tel: +82-31-728-4300
Fax: +82-31-728-4305
South Asia Pacific
Peregrine Semiconductor, China
Shanghai, 200040, P.R. China
Tel: +86-21-5836-8276
Fax: +86-21-5836-7652
For a list of representatives in your area, please refer to our Web site at: www.psemi.com
Data Sheet Identification
Advance Information
The product is in a formative or design stage. The data
sheet contains design target specifications for product
development. Specifications and features may change in
any manner without notice.
Preliminary Specification
The data sheet contains preliminary data. Additional data
may be added at a later date. Peregrine reserves the right
to change specifications at any time without notice in order
to supply the best possible product.
Product Specification
The data sheet contains final data. In the event Peregrine
decides to change the specifications, Peregrine will notify
customers of the intended changes by issuing a DCN
(Document Change Notice).
The information in this data sheet is believed to be reliable.
However, Peregrine assumes no liability for the use of this
information. Use shall be entirely at the user’s own risk.
No patent rights or licenses to any circuits described in this
data sheet are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in
devices or systems intended for surgical implant, or in other
applications intended to support or sustain life, or in any
application in which the failure of the Peregrine product could
create a situation in which personal injury or death might occur.
Peregrine assumes no liability for damages, including
consequential or incidental damages, arising out of the use of
its products in such applications.
The Peregrine name, logo, and UTSi are registered trademarks
and UltraCMOS and HaRP are trademarks of Peregrine
Semiconductor Corp.
Document No. 70-0177-04 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 11 of 11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet PE4283.PDF ] |
Número de pieza | Descripción | Fabricantes |
PE4280 | SPDT CATV UltraCMOS Switch | Peregrine Semiconductor |
PE42822 | UltraCMOS SPDT RF Switch | Peregrine Semiconductor |
PE4283 | SPDT High Power UltraCMOS | Peregrine Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |