|
|
PDF XN1A312 Data sheet ( Hoja de datos )
| Número de pieza | XN1A312 | |
| Descripción | Silicon NPN epitaxial planar type | |
| Fabricantes | Panasonic Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XN1A312 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Composite Transistors
XN0A312 (XN1A312)
Silicon NPN epitaxial planar type (Tr1)
Silicon PNP epitaxial planar type (Tr2)
For switching/digital circuits
■ Features
• Two elements incorporated into one package
(Transistors with built-in resistor)
• Reduction of the mounting area and assembly cost by one half
■ Basic Part Number
• UNR2212 (UN2212) + UNR2112 (UN2112)
■ Absolute Maximum Ratings Ta = 25°C
Parameter
Symbol Rating
Tr1 Collector-base voltage
(Emitter open)
VCBO
50
Collector-emitter voltage
(Base open)
VCEO
50
Collector current
Tr2 Collector-base voltage
(Emitter open)
IC
VCBO
100
−50
Collector-emitter voltage
(Base open)
VCEO
−50
Overall
Collector current
Total power dissipation
Junction temperature
Storage temperature
IC −100
PT 300
Tj 150
Tstg −55 to +150
Unit
V
V
mA
V
V
mA
mW
°C
°C
2.90+–00..0250
1.9±0.1
(0.95) (0.95)
345
21
0.30+–00..0150
10˚
Unit: mm
0.16+–00..0160
1: Collector (Tr1)
Base (Tr2)
2: Collector (Tr2)
EIAJ: SC-74A
3: Emitter (Tr2)
4: Base (Tr1)
5: Emitter (Tr1)
Mini5-G1 Package
Marking Symbol: 4P
Internal Connection
34
5
Tr2 Tr1
21
Publication date: February 2004
Note) The part number in the parenthesis shows conventional part number.
SJJ00115BED
1
1 page  
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of
the products or technical information described in this material and controlled under the "Foreign Exchange
and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuits examples of the products. It neither warrants non-infringement of intellectual property right
or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical
information as described in this material.
(4) The products described in this material are intended to be used for standard applications or general elec-
tronic equipment (such as office equipment, communications equipment, measuring instruments and house-
hold appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus-
tion equipment, life support systems and safety devices) in which exceptional quality and reliability are
required, or if the failure or malfunction of the products may directly jeopardize life or harm the human
body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without notice for
modification and/or improvement. At the final stage of your design, purchasing, or use of the products,
therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifica-
tions satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rat-
ing, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not
be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of
break down and failure mode, possible to occur to semiconductor products. Measures on the systems such
as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent
physical injury, fire, social damages, for example, by using the products.
(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life
and amount of time let standing of unsealed items) agreed upon when specification sheets are individually
exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet XN1A312.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XN1A311 | Composite Transistors | Panasonic Semiconductor |
| XN1A312 | Silicon NPN(PNP) epitaxial planer transistor | Panasonic Semiconductor |
| XN1A312 | Silicon NPN epitaxial planar type | Panasonic Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |