Datasheet.kr   

IA1208-FE10A 데이터시트 PDF




ROHM Semiconductor에서 제조한 전자 부품 IA1208-FE10A은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 IA1208-FE10A 자료 제공

부품번호 IA1208-FE10A 기능
기능 Color image sensor heads
제조업체 ROHM Semiconductor
로고 ROHM Semiconductor 로고


IA1208-FE10A 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 6 페이지수

미리보기를 사용할 수 없습니다

IA1208-FE10A 데이터시트, 핀배열, 회로
www.DataSheet4U.com
Contact image sensor heads
IA1208-FE10A
Color image sensor heads for High-speed
Scanner
IA1208-FE10A
Contact Image Sensor Head with 3 times higher scanning speed due to 3ch outputs.
Newly developed resolution change-over IC is employed which has improved noise resistance.
zApplications
High speed reading equipment (i.e. document scanners, plotters, laser multifunction devices).
zFeatures
1) High speed reading capability due to 3 analog output.
2) Signal amplifier is built into the image sensor IC in order to increase immunity to external noise.
3) ROHM’s newly developed sensor IC reduces failures due to ESD (based on the IEC61000-4-2 standard).
4) With the proprietary prism, the output signal is maintained uniformly.
5) The ceramic substrate is used for excellent dimensional accuracy and thermal stability.
zExternal dimensions (Unit : mm)
2-φ1.5×2
Oval Hole D4MIN
Scanning Line
2-φ1.5 D4MIN
236±0.5
216 (Effective Reading Width)
Effective 1st bit
9.4 0.324±0.1
2.0±0.8
15
No.1
Center of FCC
1mm Pitch 15pin
6.9
No.15
13.8
2- 3 +0/-0.1
MAX.3.15
1/5




IA1208-FE10A pdf, 반도체, 판매, 대치품
Contact image sensor heads
IA1208-FE10A
(b-2) Data Output Timing Chart (600dpi mode)
After turning on the SP pulse, the analog output starts from the setting up point of 82 clock pulse.
600dpi mode
CLK
1 2 82
SP
AO1 to 3
VREF output period
Vdummy
Analog output period
Vdummy
AO1 :
AO2 :
AO3 :
1 to 82clock
1 to 82clock
1 to 82clock
1 to 50pixels
Note)The CLK section area which is over the effective pixel numbers
(Output blank part) cannot be used as the analog Output
standard level.
51 to 1728pixels
1729 to 3456pixels
3457 to 5156pixels
5157 to 5184pixels
(b-3) Data Output Timing Chart (300dpi mode)
After turning on the SP pulse, the analog output starts from the setting up point of 82 clock pulse.
300dpi mode
CLK
1
2 82
SP
AO1 to 3
VREF output period
Vdummy
Analog output period
Vdummy
AO1 :
AO2 :
AO3 :
1 to 82clock
1 to 82clock
1 to 82clock
1 to 25pixels
Note)The CLK section area which is over the effective pixel numbers
(Output blank part) cannot be used as the analog Output
standard level.
26 to 864pixels
865 to 1728pixels
1729 to 2578pixels
2579 to 2592pixels
4/5

4페이지












구       성 총 6 페이지수
다운로드[ IA1208-FE10A.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
IA1208-FE10A

Color image sensor heads

ROHM Semiconductor
ROHM Semiconductor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵