|
|
|
부품번호 | TMPN3150B1AF 기능 |
|
|
기능 | Neuron Chip | ||
제조업체 | Toshiba Semiconductor | ||
로고 | |||
전체 9 페이지수
www.DataSheet4U.com
TMPN3150B1AF
TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TMPN3150B1AF
Neuron ® Chip
For Distributed Intelligent Control Networks (LONWORKS®)
The TMPN3150B1AF is a Neuron Chip which configures
LONWORKS nodes in combination with external memory.
Neuron Chips have all the built-in communications and control
functions required to implement LONWORKS nodes. These nodes
may then be easily integrated into highly-reliable distributed
intelligent control networks.
The typical functions for this chip are explained below.
FEATURES
l I / O Functions
· Eleven programmable I / O pins.
· Two programmable 16-bit timers and counters built in.
· 34 different types of I / O functions to handle a wide range of
input and output.
· ROM firmware image containing pre-programmed I / O
drivers, greatly simplifying application programs.
( Stored in external ROM )
Weight : 1.0g (Typ.)
l Network functions
· Two CPUs for communication protocol processing built in.
The communications and application CPUs execute in parallel.
· Equipped with a built-in LonTalk protocol which supports all seven levels of the OSI reference model with
ISO.
· Highly reliable communication protocol is supplied as firmware.
· Built-in twisted-pair wire transceiver
· Equipped with communications modes and communication speeds which support various types of external
transceivers.
Supports twisted-pair wire, power line, radio ( RF ), infrared, coaxial cables and fiber optics.
· Communication port transceiver modes and logical addresses stored within the EEPROM.
Can be amended via the network.
000707EBA1
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
· The products described in this document are subject to the foreign exchange and foreign trade laws.
· The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or
others.
· The information contained herein is subject to change without notice.
2001-02-21 1/9
PIN ASSIGNMENT
TMPN3150B1AF
2001-02-21 4/9
4페이지 TMPN3150B1AF
ITEM
SYMBOL
10 MHz Clock
Operating
Mode
Current
Consumption
5 MHz Clock
2.5 MHz Clock
1.25 MHz Clock
0.625 MHz Clock
Sleep Mode Current
Consumption
IDD (OP)
IDD (SLP)
TYP.
18
10
5
2.5
1.5
18
MAX UNIT
30
15
8 mA
5
3
100 µA
Note:
Test conditions for current dissipation
VDD=5V, all output=with no load, all input=0.2V or below or VDD−0.2V, programmable pull-up=off, crystal
oscillator clock input, differential receiver disabled.
The current value ( typ. ) is a typical value when Ta=25°C.
The current value ( max ) applies to the rated temperature range at VDD=5.5V.
200µA ( typ. ) to 600µA ( max ) is added to the current of the differential receiver when the receiver is
enabled.
The differential receiver is enabled by either of the following conditions :
● When the Neuron chip is in Run mode and the communication ports are in Differential mode.
● When the Neuron chip is in Sleep mode, the communication ports are in Differential mode, and the
Comm Port Wakeup is not masked.
2001-02-21 7/9
7페이지 | |||
구 성 | 총 9 페이지수 | ||
다운로드 | [ TMPN3150B1AF.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
TMPN3150B1AF | Neuron Chip | Toshiba Semiconductor |
TMPN3150B1AFG | TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC | Toshiba Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |