|
|
PDF AD9387NK Data sheet ( Hoja de datos )
| Número de pieza | AD9387NK | |
| Descripción | Low Power HDMI/DVI Transmitter | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AD9387NK (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
FEATURES
General
Low power HDMI/DVI transmitter ideal for portable
applications
Compatible with HDMI v.1.3, DVI v.1.0, and HDCP 1.3
Single 1.8 V power supply
Video/audio inputs accept logic levels from 1.8 V to 3.3 V
Digital video
80 MHz operation supports all HDTV resolutions from
480i to 1080i
Programmable 2-way color space converter
Supports RGB, YCbCr, and DDR
Supports ITU656-based embedded syncs
Automatic input video format timing detection (CEA-861D)
Digital audio
Supports standard S/PDIF for stereo LPCM or compressed
audio up to 192 kHz
8-channel, uncompressed LPCM I2S audio up to 192 kHz
Special features for easy system design
On-chip MPU with I2C master to perform HDCP operations
and EDID reading operations
5 V tolerant I2C and HPD I/Os, no extra device needed
No audio master clock needed for supporting S/PDIF
and I2S
On-chip MPU reports HDMI events through interrupts and
registers
APPLICATIONS
Digital video cameras
Digital still cameras
Personal media players
Cellular handsets
DVD players and recorders
Digital set-top boxes
A/V receivers
HDMI repeater/splitter
GENERAL DESCRIPTION
The AD9387NK is an 80 MHz, high definition multimedia
interface (HDMI™) v.1.3 transmitter. It supports HDTV formats
up to 720p and 1080i and computer graphic resolutions up to
XGA (1024 × 768 @ 75 Hz). With the inclusion of HDCP, the
AD9387NK allows the secure transmission of protected content,
as specified by the HDCP 1.3 protocol.
High Performance, Low
Power HDMI/DVI Transmitter
AD9387NK
FUNCTIONAL BLOCK DIAGRAM
SCL SDA MCL MDA
INT
I2C
SLAVE
HDCP
CORE
HDCP AND EDID
MICRO-
CONTROLLER
HPD
CLK
VSYNC
HSYNC
DE
D[23:0]
S/PDIF
MCLK
I2S[3:0]
LRCLK
SCLK
REGISTER
CONFIGURATION
LOGIC
I2C
MASTER
VIDEO
DATA
CAPTURE
SYNC
ADJUSTMENT
AND
GENERATION
COLOR
SPACE
CONVERSION
AUDIO
DATA
CAPTURE
AD9387NK
HDMI Tx
CORE
DDCSCL
DDCSDA
Tx0[1:0]
Tx1[1:0]
Tx2[1:0]
TxC[1:0]
Figure 1.
The AD9387NK supports both S/PDIF and 8-channel I2S audio.
Its high fidelity, 8-channel I2S can transmit either stereo or 7.1
surround audio at 192 kHz. The S/PDIF can carry stereo linear
pulse-code modulation (LPCM) audio or compressed audio,
including Dolby® Digital and DTS®.
The AD9387NK helps reduce system design complexity and cost
by incorporating such features as an internal microprocessor
for high-bandwidth digital content protection (HDCP) opera-
tions, an I2C® master for extended display identification data
(EDID) reading, a single 1.8 V power supply, and 5 V tolerance
on the I2C and hot plug detect pins. For additional information
and resources, see the Applications Information section.
Fabricated in an advanced CMOS process, the AD9387NK
is available in a space saving, 76-ball CSP_BGA. The package is
RoHS compliant and is specified from −25°C to +90°C
operation.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2007 Analog Devices, Inc. All rights reserved.
1 page  
AD9387NK
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Digital Inputs
Digital Output Current
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
Maximum Case Temperature
Rating
−0.3 V to +5 V
20 mA
−40°C to +100°C
−65°C to +150°C
150°C
150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
EXPLANATION OF TEST LEVELS
I. 100% production tested.
II. 100% production tested at 25°C and sample tested at
specified temperatures.
III. Sample tested only.
IV. Parameter is guaranteed by design and characterization
testing.
V. Parameter is a typical value only.
VI. 100% production tested at 25°C; guaranteed by design
and characterization testing.
VII. Limits defined by HDMI specification; guaranteed by
design and characterization testing.
VIII. Guaranteed by design.
ESD CAUTION
Rev. 0 | Page 4 of 8
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet AD9387NK.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AD9387NK | Low Power HDMI/DVI Transmitter | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |