Datasheet.kr   

MSA-RM-1 데이터시트 PDF




Banner에서 제조한 전자 부품 MSA-RM-1은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 MSA-RM-1 자료 제공

부품번호 MSA-RM-1 기능
기능 (MSA-RM-1 / MSA-RM-2) Replacement Relay Modules
제조업체 Banner
로고 Banner 로고


MSA-RM-1 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 1 페이지수

미리보기를 사용할 수 없습니다

MSA-RM-1 데이터시트, 핀배열, 회로
www.DataSheet4U.com
® MSA-RM-1 and MSA-RM-2 Relay Modules
Replacement Relay Modules for MINI-SCREEN® and MICRO-SCREEN® Metal Boxes
Model MSA-RM-1
shown
WARNING . . .
Shock Hazard
Before performing any
maintenance inside the control box,
always remove all power from the
control box and from the machinery
to which the control box is connected.
Failure to do so can result in
electrical shock and serious injury or
death.
Installation
Module replacement requires only a 3/8" nut driver. The procedure given below is for
replacement of the module.
Removing the old module
1. Before opening the control box cover, remove all power to the control box and to the
machinery to which the control box is connected. Open the control box cover. Refer to
the drawing below.
2. The relay module is held to the power supply board by four #10-24 nylon nuts and
connector pins. The nuts are shaded in the drawing below. Remove the nuts from the
module that is to be removed. NOTE: A spare set of nuts is provided.
3. Free the module from its connector sockets as follows: Grasp the module. Pull up gently
and evenly, while rocking the module from side-to-side until the module comes free of
the connector sockets.
Installing the new module
1. Make certain that all power has been removed from the control box and the machinery to
which the control box is connected.
2. Place the module onto its nylon mounting studs. Press gently but firmly along the right
and left edges of the module to seat the circuit connector pins snugly and completely into
their sockets.
3. Replace the four #10-24 nylon nuts and tighten them snugly using a 3/8" nut driver. Use
caution to avoid overtightening.
4. Refer to the system instruction manual and perform the Commissioning Checkout
Procedure found there.
If you have any problems or questions, contact the Banner Applications Department
at 888.373.6767. E-mail: [email protected]
Printed in USA
10/05 P/N 40842 rev. B
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]





구       성 총 1 페이지수
다운로드[ MSA-RM-1.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
MSA-RM-1

(MSA-RM-1 / MSA-RM-2) Replacement Relay Modules

Banner
Banner
MSA-RM-2

(MSA-RM-1 / MSA-RM-2) Replacement Relay Modules

Banner
Banner

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵