Datasheet.kr   

MKT075 데이터시트 PDF




Sharma Electro Components에서 제조한 전자 부품 MKT075은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 MKT075 자료 제공

부품번호 MKT075 기능
기능 Film Capacitors
제조업체 Sharma Electro Components
로고 Sharma Electro Components 로고


MKT075 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 18 페이지수

미리보기를 사용할 수 없습니다

MKT075 데이터시트, 핀배열, 회로
www.DataSheet4U.com
Quick Reference
Series
DM05
DM10
DM12
DM15
DM19
DM20
DM30
DM42
Sharma Mica Capacitors
Page 1
Features
Lead Spacing: 3.05 +/-0.8 mm
Lead Spacing: 3.57 +/-0.8 mm
Lead Spacing: 5.00 +/-0.8 mm
Lead Spacing: 5.95 +/-0.8 mm
Lead Spacing: 8.73 +/-0.8 mm
Lead Spacing: 11.11 +/-0.8 mm
Lead Spacing: 11.11 +/-0.8 mm High Capacitance
Lead Spacing: 26.99 +/-0.8 mm High Capacitance
Packaging Specifications
Page
7
9
10
11
13
15
17
17
18
Tel: (949)642-7324
SECI Engineers & Buyers' Guide
Fax: (949)642-7327




MKT075 pdf, 반도체, 판매, 대치품
Sharma Mica Capacitors
PERFORMANCE CHARACTERISTICS
GENERAL SPECIFICATIONS FOR SHARMA  MICA CAPACITORS
FIGURE 1
The SHARMA Mica capacitors meet the required commercial specifications and theEIA
requirements. The CMO series capacitors also meet the military specifications MIL-C-5. The
actual specifications and dimensions of the capacitors are mentioned under each series in
the catalog.
CAPACITANCE
The capacitance of mica capacitors is measured at 1 M Hz ±10% for capacitance values up
to 1000 pF and at 1 K Hz ±10% for capacitance values above 1000 pF. The capacitance
value when measured at 25 °C shall be with in the tolerance specified.
DISSIPATION FACTOR
The dissipation factor for mica capacitors are measured at 1MHz for values up to 1000 pF
and at 1 KHz for values above 1000 pF. The values shall remain within the specified values.
The variation pattern of dissipation factor for different values of capacitance are also shown
in the Figure 3.
FIGURE 2
INSULATION RESISTANCE
The insulation resistance is measured at 50 ±5 V for capacitors with rated voltage of 50 V
DC and at 100 ±10 V for capacitors with higher voltage rating. The insulation resistance thus
measured at 25 °C shall meet the specified limits. The variation of insulation resistance for
different capacitance values at 25 °C is shown in Figure 1. After certain tests listed below
the insulation resistance value changes and these values are plotted in Figure 2. Figure 4
indicates the variation pattern of insulation resistance with capacitance value at different
temperature conditions.
WITHSTANDING VOLTAGE
The mica capacitors are designed to withstand higher voltage than the rated voltage for
limited time. These capacitors shall withstand 200% of the rated voltage for 1 to 5 seconds
when applied with a limiting surge current value of 50 mA.
FIGURE 3
VIBRATION GRADE
The capacitors shall be subjected to a harmonic motion having an amplitude of 1.5 mm and
the frequency which is varied between the limits of 10 and 55 Hz. The entire frequency
range from 10 to 55 Hz and then back to 10 Hz shall be traversed in approximately 1 minute
and the motion shall be applied for a period of 1hour in each of the three mutually
perpendicular directions. After testing, when the electrical measurements are performed:
1. The insulation resistance shall be more than 30000 M Ohms for capacitance value up to
10000 pF. Please refer to Figure 2 for acceptable variation pattern for Insulation
Resistance for values above 10000 pF.
2. The dissipation factor shall be within the original specified limits. Please also refer to
Figure 3 for variation pattern of dissipation factor with respect to capacitance value.
3. The capacitance change shall not exceed ±1% or ±1 pF whichever is greater.
FIGURE 4
SOLDERING HEAT RESISTANCE
Both leads of the capacitors shall be immersed in molten solder at a temperature of 270
°C for 3 to 4 seconds. After the test the capacitors shall meet the initial requirements of the
Withstanding voltage and the Capacitance change shall not exceed ± 0.55 or ± 1 pF.
MOISTURE RESISTANCE
Capacitors shall be subjected to a temperature of 40 ±2 °C at 90 to 95 % relative humidity
for 240 ±8 Hours. After the test:
1. The samples shall meet the after test requirement of Insulation resistance values as
furnished in Figure 2.
2. The dissipation factor shall be within 1.5 times the original specified limits. Please also
refer to Figure 3 for variation pattern of dissipation factor with respect to capacitance
value for original limits.
3. The capacitance change shall not exceed ±3% or ±1 pF whichever is greater.
FIGURE 5
MOISTURE RESISTANCE LOADING
Capacitors shall be subjected to a temperature of 40±2 °C at 90 to 95% relative humidity
with rated voltage for 500 Hours. After the test the samples are maintained at normal
temperature and relative humidity for a period of 4 to 24 hours. When tested after this;
1. The capacitor samples shall be free of cracks, or other mechanical damages and the
marking shall remain legible
2. The samples shall meet the original requirement of the Withstanding voltage
3. The samples shall meet the after test requirement of Insulation resistance as furnished in
Figure 2
4. The dissipation factor shall be within 2 times the original limits
5. The capacitance change shall not exceed ±5% or ±1 pF
Page 4
Tel: (949)642-7324
SECI Engineers & Buyers' Guide
Fax: (949)642-7327

4페이지










MKT075 전자부품, 판매, 대치품
DM 05 Mica Capacitors
Sharma Mica Capacitors
Page 7
DIMENSIONS:
LL = 31.75 mm (1.25”) min.
DM05
Case
Dimensions
in Millimeters
Lead Spacing:
3.05 ± 0.8mm
CAPACITANCE
VALUE in pF
1 - 12
15
18 - 20
22 - 24
27
30 - 33
36
39
43
47-51
56
62
68
75 - 82
91
100 - 110
120
130
150
160
170 - 180
200
220
240
270
300
330 - 360
390
C
C
C
C
E
E
E
E
E
E
E
E
E
E
F
F
F
F
F
F
F
F
F
F
F
F
F
F
300 V DC
Lmax.
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
W max.
4.83
4.83
5.08
5.08
5.08
5.08
5.33
5.33
5.33
5.33
5.59
5.59
5.59
5.84
5.84
6.10
6.35
T max
2.79
3.05
3.05
3.05
3.30
3.30
3.30
3.30
3.56
3.56
3.81
3.81
3.81
4.06
4.32
4.57
4.83
VOLTAGE
100 V DC
Lmax. W max. T max
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
4.83
4.83
5.08
5.08
5.08
5.08
5.08
5.08
5.33
5.33
5.33
5.33
5.59
5.59
5.84
5.84
5.84
6.10
6.35
3.05
3.05
3.05
3.05
3.05
3.05
3.30
3.30
3.30
3.56
3.56
3.56
3.81
4.06
4.06
4.32
4.32
4.57
4.83
50 V DC
Lmax. W max. T max
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
6.86
4.83
4.83
4.83
4.83
5.08
5.08
5.08
5.08
5.08
5.08
5.33
5.33
5.33
5.33
5.59
5.59
5.59
5.84
5.84
6.10
6.35
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.30
3.30
3.30
3.30
3.56
3.56
3.56
3.81
3.81
4.06
4.06
4.32
4.57
4.83
DM05
Case
Dimensions
in Inches
Lead Spacing:
0.120 ± 0.031”
CAPACITANCE
VALUE in pF
1 - 12
15
18 - 20
22 - 24
27
30 - 33
36
39
43
47-51
56
62
68
75 - 82
91
100 - 110
120
130
150
160
170 - 180
200
220
240
270
300
330 - 360
390
C
C
C
C
E
E
E
E
E
E
E
E
E
E
F
F
F
F
F
F
F
F
F
F
F
F
F
F
300 V DC
Lmax. W max. T max
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.190
0.190
0.200
0.200
0.200
0.200
0.210
0.210
0.210
0.210
0.220
0.220
0.220
0.230
0.230
0.240
0.250
0.110
0.120
0.120
0.120
0.130
0.130
0.130
0.130
0.140
0.140
0.150
0.150
0.150
0.160
0.170
0.180
0.190
VOLTAGE
100 V DC
Lmax. W max. T max
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.190
0.190
0.200
0.200
0.200
0.200
0.200
0.200
0.210
0.210
0.210
0.210
0.220
0.220
0.230
0.230
0.230
0.240
0.250
0.120
0.120
0.120
0.120
0.120
0.120
0.130
0.130
0.130
0.140
0.140
0.140
0.150
0.160
0.160
0.170
0.170
0.180
0.190
Lmax.
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
0.270
50 V DC
W max.
0.190
0.190
0.190
0.190
0.200
0.200
0.200
0.200
0.200
0.200
0.210
0.210
0.210
0.210
0.220
0.220
0.220
0.230
0.230
0.240
0.250
T max
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.130
0.130
0.130
0.130
0.140
0.140
0.140
0.150
0.150
0.160
0.160
0.170
0.180
0.190
Tel: (949)642-7324
SECI Engineers & Buyers' Guide
Fax: (949)642-7327

7페이지


구       성 총 18 페이지수
다운로드[ MKT075.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
MKT075

Film Capacitors

Sharma Electro Components
Sharma Electro Components

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵