DataSheet.es    


PDF SKY74076 Data sheet ( Hoja de datos )

Número de pieza SKY74076
Descripción Receiver
Fabricantes Skyworks Solutions 
Logotipo Skyworks Solutions Logotipo



Hay una vista previa y un enlace de descarga de SKY74076 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! SKY74076 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
PRODUCT SUMMARY
SKY74076: Receiver for Dual-Band CDMA and GPS Mobile
Handset Applications
Applications
CDMA and GPS phones
Features
Three-step gain control cellular LNA
GPS LNA
External resistor to adjust LNA bias current
Independent CDMA and GPS mixers
Buffer LO signal for transmit upconverter
Dynamic range VGA, 90 dB
VHF oscillator, 200 MHz to 600 MHz
Battery cell operation (2.7 V < Vcc < 3.3 V)
RFLGA™ (40-pin, 6 x 6 x 1 mm) Pb-free (MSL3, 260 °C per
JEDEC J-STD-020) package with downset paddle
Skyworks offers lead (Pb)-free “environmentally
friendly” packaging that is RoHS compliant
(European Parliament for the Restriction of
Hazardous Substances).
Description
The SKY74076 is a single Intermediate Frequency (IF), dual-band,
receiver for Code Division Multiple Access (CDMA) and Global
Positioning System (GPS) applications.
The device is a highly integrated super-heterodyne receiver.
Except for the Surface Acoustic Wave (SAW) filters and matching
components, the SKY74076 incorporates all the components
required to implement the receiver chain, from the Low-Noise
Amplifier (LNA) to the In-Phase and Quadrature (I/Q) demodulator
stages. Two LNAs are in the front-end receiver: a three-step gain
stage cellular LNA (high, mid, and bypass) and a high gain GPS
LNA.
After RF LNA signal amplification and filtering from the antenna,
the received signal is mixed down from RF to IF. There are
separate mixers for CDMA cellular and GPS modes. The CDMA
mixer has balanced outputs for the IF SAW filters and can be
combined externally to mate to a single-ended SAW filter. The
GPS mixers have a differential output for an external LC bandpass
filter. After IF filtering, the IF signal is amplified by a Variable Gain
Amplifier (VGA) and sent to an I/Q demodulator, resulting in
baseband I/Q signals at the output.
The SKY74076 is also designed with two Local Oscillator (LO)
input ports, one for the CDMA mixer and one for the GPS mixer.
These mixers operate at different RF frequency inputs, but have
the same IF frequency output. This usually refers to a single IF
(SIF) plan at 183.6 MHz.
The CELL_LO signal (pin 30) provides an LO port for the CDMA
cellular mixer. In the cellular band, an internal divider divides the
frequency by two, which provides the LO input to the cellular
mixer. Only one external VCO is required for the UHF PLL.
Additionally, the mixer LO signal is coupled and amplified
internally, which provides another RF signal to drive the
transmitter upconverter LO port.
The VGA has a minimum dynamic range of 90 dB with a control
voltage range of 0.5 to 2.5 V, which is common to all modes. A
VHF oscillator operates with external tank circuits to provide LO
frequencies for the I/Q demodulator in the cellular, PCS, and GPS
modes.
The noise figure, gain, and 3rd order Input Intercept Point (IIP3) of
each stage in the receiver chip are optimized to meet the system
requirements for CDMA modes according to TIA/EIA-98-C. The
SKY74076 design employs BiCMOS technology for low cost, high
performance, and a high level of integration.
A block diagram of the SKY74076 is shown in Figure 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
103087C • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • January 24, 2005
1

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet SKY74076.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SKY74073Dual-Band SPR ModuleSkyworks Solutions
Skyworks Solutions
SKY74076ReceiverSkyworks Solutions
Skyworks Solutions

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar