Datasheet.kr   

AT79C1030 데이터시트 PDF




ATMEL Corporation에서 제조한 전자 부품 AT79C1030은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 AT79C1030 자료 제공

부품번호 AT79C1030 기능
기능 8-Port Gigabit Ethernet CoS Switch
제조업체 ATMEL Corporation
로고 ATMEL Corporation 로고


AT79C1030 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 5 페이지수

미리보기를 사용할 수 없습니다

AT79C1030 데이터시트, 핀배열, 회로
www.DataSheet4U.com
Features
8-port 10/100/1000Mb/s Ethernet MII/GMII Switch
Provides Packet Switching Functions Between 8 Ethernet Ports
Advanced CoS (Class of Service) Supports 4-level Priority Switching
Duplex Mode Auto-negotiation Supported
Full-duplex Flow Control (802.3x) and Half-duplex Back Pressure
VLAN 802.1Q or Port-based Supported (Port-based, MAC-based
and Protocol Based)
ARP/Broadcast Filter (Optional)
8 GbE Ports with Non-blocking Switching Performance
Supports Automatic Address Learning and Aging
Integrated MAC and VLAN Address Tables
On-chip Packet Buffer Supports Store-and-Forward Switching Architecture
SPI (RS-232 Interface) for Setup and Unmanaged Operation
Multicast and Broadcast Storm Control
Up to 36-Kbyte Media Access Control (MAC) Address Cache
1.8V and 3.3V Supply
Description
The AT79C1030 device combines all the functions of a high-speed switch, including
packet buffer, Media Access Controllers (MAC), address management, and a non-
blocking switch fabric. It complies with IEEE 802 specification, providing compatibility
with all industry standard Ethernet, Fast Ethernet, and Gigabit Ethernet devices.
The AT79C1030 utilizes the Store and Forward switching architecture to manage
packet switching between the eight independent Ethernet ports. The switch records
(learning), the relation between MAC addresses (including VLAN information) and the
actual ports. Next, the switch will resolve (forwarding) the destination MAC address of
the ingress packet, then it selects the related ports to transmit the packet. The device
is utilizing and maintaining a MAC address table and a VLAN table to accomplish this
task.
Using Store and Forward, the device reads the whole incoming frame into an internal
on-chip buffer and calculates its own frame check sequence. The switch then com-
pares its CRC figure to the frame's CRC. If the two CRCs are the same, the switch will
consult its address look-up table, create the virtual link and then forward the frame.
The Switch Core uses the packet head information to perform packet filter, packet
drop, address table look up, priority category, etc. After the device completes the task
of forwarding decision, then all the forwarding information will be sent to the forwarding
module.
Each port has an independent forwarding module. The module puts the forwarding
information of the packets forwarded to each respected port. This information
includes:
1. The packet buffer location
2. The size of the packet
3. VLAN information
Four level priority queues are employed at each port. The transmission module
fetches the forwarding information from these different priority queues according to the
round robin rule and transmits the related packet. The higher priority level queues are
more likely to send the packets recorded in it and are less likely to discard these pack-
ets. After resolving each ingress packet, the switch engine can use the obtained
information to perform protocol processing. The device supports VLAN mode switch,
which means only ports belonging to the same VLAN can switch packets. This device
8-Port Gigabit
Ethernet CoS
Switch
AT79C1030
Summary
3435BS–NETST–6/04
Note: This is a summary document. A complete document
is available under NDA. For more information, please con-
tact your local Atmel sales office.




AT79C1030 pdf, 반도체, 판매, 대치품
Electrical Characteristics
Absolute Maximum Ratings*
Parameter
Range
Unit
Power Supply VCC (Digital Logic)
Power Supply VIO (Input/Output)
1.8 ±5%
3.3 ±10%
V
V
Storage Temperature
-65 to 140
°C
IOL per I/O pin
Power Dissipation
TBD
1.9
W
Commercial
0 to -70
°C
*NOTICE:
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent
damage to the device. This is a stress rating only and functional operation of the device at
these or any other conditions beyond those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
4 AT79C1030
3435BS–NETST–6/04

4페이지












구       성 총 5 페이지수
다운로드[ AT79C1030.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
AT79C1030

8-Port Gigabit Ethernet CoS Switch

ATMEL Corporation
ATMEL Corporation

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵