Datasheet.kr   

MC-7883 데이터시트 PDF




CEL에서 제조한 전자 부품 MC-7883은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 MC-7883 자료 제공

부품번호 MC-7883 기능
기능 POWER DOUBLER AMPLIFIER
제조업체 CEL
로고 CEL 로고


MC-7883 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 7 페이지수

미리보기를 사용할 수 없습니다

MC-7883 데이터시트, 핀배열, 회로
www.DataSheet4U.com
GaAs MULTI-CHIP MODULE
MC-7883
870 MHz CATV 22 dB POWER DOUBLER AMPLIFIER
DESCRIPTION
The MC-7883 is a GaAs Multi-chip Module designed for use in CATV applications up to 870 MHz. This unit has
low distortion, low noise figure and return loss across the entire frequency band.
Reliability and performance uniformity are assured by our stringent quality and control procedures.
FEATURES
• Low distortion
• High linear gain
• Low return loss
GL = 22.0 dB MIN. @ f = 870 MHz
<R> ORDERING INFORMATION
Part Number
MC-7883
Order Number
MC-7883-AZ
Package
7-pin special with heatsink
(Pb-Free)
Supplying Form
25 pcs MAX./Tray
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: MC-7883
ABSOLUTE MAXIMUM RATINGS (TA = +25°C)
Parameter
Supply Voltage
Input Voltage Note
Operating Case Temperature
Storage Temperature
Symbol
VDD
Vi
TC
Tstg
Ratings
30
65.0
30 to +100
40 to +100
Unit
V
dBmV
°C
°C
Note In case of single tone
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
Document No. PG10315EJ02V0DS (2nd edition)
Date Published December 2006 NS CP(N)
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
2002, 2006




MC-7883 pdf, 반도체, 판매, 대치품
MC-7883
NOTES ON CORRECT USE
(1) The space between PC board and root of the lead should be kept more than 1 mm to prevent undesired stress
to the lead and also should be kept less than 4 mm to prevent undesired parasitic inductance.
Recommended that space is 2.0 to 3.0 mm typical.
(2) Recommended torque strength of the screw is 59 to 78 Ncm.
(3) Form the ground pattern as wide as possible to minimize ground impedance.
(to prevent undesired oscillation)
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
methods and conditions other than those recommended below, contact your nearby sales office.
For soldering
Soldering Method
Partial Heating
Soldering Conditions
Peak temperature (pin temperature) : 350°C or below Note
Soldering time (per pin of device) : 3 seconds or less
Recommended Condition Symbol
Note The point of pin part heating must be kept more than 1.2 mm distance from the root of lead.
4 Data Sheet PG10315EJ02V0DS

4페이지










MC-7883 전자부품, 판매, 대치품
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Lead (Pb)
Mercury
Cadmium
Hexavalent Chromium
PBB
PBDE
Concentration Limit per RoHS
(values are not yet fixed)
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Concentration contained
in CEL devices
-A
Not Detected
-AZ
(*)
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.

7페이지


구       성 총 7 페이지수
다운로드[ MC-7883.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
MC-7881

NECs 870 MHz GaAs CATV POWER DOUBLER AMPLIFIER

NEC
NEC
MC-7882

NECs 870 MHz GaAs CATV POWER DOUBLER AMPLIFIER

NEC
NEC

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵