DataSheet.es    


PDF 54LVTH245A Data sheet ( Hoja de datos )

Número de pieza 54LVTH245A
Descripción 3.3V ABT Octal Bus Transceiver
Fabricantes Maxwell Technologies 
Logotipo Maxwell Technologies Logotipo



Hay una vista previa y un enlace de descarga de 54LVTH245A (archivo pdf) en la parte inferior de esta página.


Total 9 Páginas

No Preview Available ! 54LVTH245A Hoja de datos, Descripción, Manual

www.DataSheet4U.com
54LVTH245A
3.3V ABT Octal Bus Transceiver
with 3-State Output
Logic Diagram (Positive Logic)
FEATURES:
• 3.3V ABT octal bus transceiver with 3-state outputs
• RAD-PAK® radiation hardened against natural space radia-
tion
• Total dose hardness:
- >100 krad (Si), depending upon space misssion
• Package:
- 20 pin RAD-PAK® flat package
- 20 pin RAD-PAK® DIP
• Operating temperature range:
-55 to 125°C
• Supports mixed-mode signal operation
- 5V input and output voltages with 3.3V VCC
• Supports unregulated battery operation down to 2.7V.
• Typical VOLP (output ground bounce) < 0.8V at VCC=3.3V,
TA= 25°C
• Latch-up performance exceeds 500mA per JEDEC stan-
dard
• Supports live insertion
• Bus-hold data inputs eliminate the need for external pullup
resistors
DESCRIPTION:
Maxwell Technologies’ 54LVTH245A 8-bit octal transceiver
micro-circuit features a greater than 100 krad (Si) total dose
tolerance, depending upon space mission. The 54LVTH245A
is designed specifically for low voltage (3.3V) VCC operation,
but with the capability to provide a TTL interface to a 5V sys-
tem environment. It is designed for asynchronous communica-
tion between data buses. The device transmits data from the
A bus to the B bus or from the B bus to the A bus depending
upon the logic level at the direction control (DIR) input. The
output enable (OE) input can be used to disable the device so
the buses are effectively isolated. The 54LVTH245A active
bus-hold circuitry is provided to prevent floating data inputs at
a valid logic level and to eliminate the need for external pullup
resistors.
Maxwell Technologies' patented RAD-PAK® packaging technol-
ogy incorporates radiation shielding in the microcircuit pack-
age. It eliminates the need for box shielding while providing
the required radiation shielding for a lifetime in orbit or space
mission. In a GEO orbit, RAD-PAK provides greater than 100
krad (Si) radiation dose tolerance. This product is available
with screening up to Class S.
1000597
12.19.01 Rev 1
(858) 503-3300 - Fax: (858) 503-3301 - www.maxwell.com
All data sheets are subject to change without notice 1
©2001 Maxwell Technologies
All rights reserved.

1 page




54LVTH245A pdf
3.3V ABT Octal Bus Transceiver
with 3-State Output
FIGURE 1. LOAD CIRCUIT
54LVTH245A
Figure Note:
1. CL includes probe and jig capacitance.
PARAMETER MEASUREMENT INFORMATION
TEST S1
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
Open
6V
GND
FIGURE 2. PULSE DURATION
FIGURE 3. SETUP AND HOLD TIMES
1000597
12.19.01 Rev 1
All data sheets are subject to change without notice 5
©2001 Maxwell Technologies
All rights reserved.

5 Page










PáginasTotal 9 Páginas
PDF Descargar[ Datasheet 54LVTH245A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
54LVTH245A3.3V ABT Octal Bus TransceiverMaxwell Technologies
Maxwell Technologies

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar