|
|
|
부품번호 | ZL60007 기능 |
|
|
기능 | 622Mbps PIN with Preamplifier | ||
제조업체 | Zarlink Semiconductor | ||
로고 | |||
ZL60007
1310nm, 1550nm 622Mbps
PIN with Preamplifier
Data Sheet
May 2003
Ordering Information
ZL60007/TBD TO-46 with lens
-40°C to +85°C
Features
• Data rate up to 622Mbps
• 1310, 1550 nm PIN
• TIA with AGC
• TO-46 Assembly
• 3.3V power supply
Applications
• Sonet OC-12
• SDH STM-4
• ATM 622Mbps
Data Out
Data Out
VCC
Case
GND
Bottom View
Figure 1 - Pin Diagram
Description
This optical receiver is a 3.3V device which contains
an InGaAs PIN photodiode and a transimpedance
amplifier with Automatic Gain Control and DC restore
circuit assembled in a TO-46 package. It is designed
for ATM and SDH/Sonet 622Mbps. Its double-lens
optical system is designed for single mode fiber as
well as for multimode fiber with a core diameter up to
62.5µm. Reliability Assurance based on Telcordia GR-
468-CORE.
VCC
DDaattaa Out
DDaattaaOut
GND
Figure 2 - Functional Schematic
1
ZL60007
Data Sheet
100 10
10 1
Response
OIPvsOutput
1 0.1
0.1
0.0001
0.001
0.01
Pavg (m W)
0.1
0.01
1
Application Guidelines
Figure 6 - Output Voltage vs Input Power
ESD handling
The receiver is sensitive to electrostatic discharges. When handling the device, precautions for ESD sensitive
devices should be taken. These precautions include use of ESD protected work area with wrist straps, controlled
work benches, floors etc.
Power Supply Filter
Power Supply decoupling capacitors are recommended for optimal performance of the receiver. A filter is
recommended to minimize power supply noise. See Figure 7.
Host
VCC
L
10µ H
C
0.1µ F
C
10nF
PIN /
Preamp
Figure 7 - Recommended Power Supply Filter
4 Zarlink Semiconductor Inc.
4페이지 For more information about all Zarlink products
visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively “Zarlink”) is believed to be reliable.
However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such
information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or
use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual
property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in
certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink.
This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part
of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other
information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the
capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute
any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and
suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does
not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in
significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink’s conditions of sale which are available on request.
Purchase of Zarlink’s I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system
conforms to the I2C Standard Specification as defined by Philips.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc.
Copyright Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE
7페이지 | |||
구 성 | 총 7 페이지수 | ||
다운로드 | [ ZL60007.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
ZL60001 | High speed 2.5 Gbps 850 nm VCSEL | Zarlink Semiconductor |
ZL60003 | Plastic Optical Fiber Communications | Zarlink Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |