|
|
PDF 1SMA591xBT3 Data sheet ( Hoja de datos )
| Número de pieza | 1SMA591xBT3 | |
| Descripción | (1SMA59xxBT3) 1.5 Watt Plastic Surface Mount Zener Voltage Regulators | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 1SMA591xBT3 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
1SMA5913BT3 Series
1.5 Watt Plastic
Surface Mount
Zener Voltage Regulators
This complete new line of 1.5 Watt Zener Diodes offers the
following advantages.
Features
• Standard Zener Breakdown Voltage Range − 3.3 V to 68 V
• ESD Rating of Class 3 (>16 kV) per Human Body Model
• Flat Handling Surface for Accurate Placement
• Package Design for Top Slide or Bottom Circuit Board Mounting
• Low Profile Package
• Ideal Replacement for MELF Packages
• Pb−Free Packages are Available
Mechanical Characteristics:
CASE: Void-free, transfer-molded plastic
FINISH: All external surfaces are corrosion resistant with readily
solderable leads
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 seconds
POLARITY: Cathode indicated by molded polarity notch or cathode
band
FLAMMABILITY RATING: UL 94 V−0 @ 0.125 in
MAXIMUM RATINGS
Rating
Symbol Value Unit
DC Power Dissipation @ TL = 75°C,
Measured Zero Lead Length (Note 1)
Derate above 75°C
Thermal Resistance, Junction−to−Lead
DC Power Dissipation @ TA = 25°C (Note 2)
Derate above 25°C
Thermal Resistance, Junction−to−Ambient
Operating and Storage Temperature Range
PD
RqJL
PD
RqJA
TJ, Tstg
1.5
20
50
0.5
4.0
250
−65 to
+150
W
mW/°C
°C/W
W
mW/°C
°C/W
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. 1 in square copper pad, FR−4 board.
2. FR−4 Board, using ON Semiconductor minimum recommended footprint.
© Semiconductor Components Industries, LLC, 2007
March, 2007 − Rev. 6
1
http://onsemi.com
CATHODE
ANODE
SMA
CASE 403D
PLASTIC
MARKING DIAGRAM
8xxB
AYWWG
8xxB
A
Y
WW
G
= Device Code (Refer to page 2)
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping†
1SMA59xxBT3
SMA 5000/Tape & Reel
1SMA59xxBT3G SMA 5000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
DEVICE MARKING INFORMATION
See specific marking information in the device marking
column of the Electrical Characteristics table on page 2 of
this data sheet.
Publication Order Number:
1SMA5913BT3/D
1 page  
1SMA5913BT3 Series
PACKAGE DIMENSIONS
SMA
CASE 403D−02
ISSUE C
HE
E
bD
POLARITY INDICATOR
OPTIONAL AS NEEDED
(SEE STYLES)
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 403D−01 OBSOLETE, NEW STANDARD IS 403D−02.
MILLIMETERS
DIM MIN NOM MAX
A 1.91
2.16
2.41
A1 0.05
0.10
0.15
b 1.27 1.45 1.63
c 0.15 0.28 0.41
D 2.29
2.60
2.92
E 4.06
4.32
4.57
HE 4.83 5.21 5.59
L 0.76 1.14 1.52
MIN
0.075
0.002
0.050
0.006
0.090
0.160
0.190
0.030
INCHES
NOM
0.085
0.004
0.057
0.011
0.103
0.170
0.205
0.045
MAX
0.095
0.006
0.064
0.016
0.115
0.180
0.220
0.060
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
A
L c A1
SOLDERING FOOTPRINT*
4.0
0.157
2.0
0.0787
2.0
0.0787
SCALE 8:1
ǒ mm Ǔ
inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
5
1SMA5913BT3/D
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet 1SMA591xBT3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 1SMA591xBT3 | (1SMA59xxBT3) 1.5 Watt Plastic Surface Mount Zener Voltage Regulators | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |