Datasheet.kr   

E36SR05015 데이터시트 PDF




Delta Electronics에서 제조한 전자 부품 E36SR05015은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 E36SR05015 자료 제공

부품번호 E36SR05015 기능
기능 75W Eighth Brick Family DC/DC Power Modules
제조업체 Delta Electronics
로고 Delta Electronics 로고


E36SR05015 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 14 페이지수

미리보기를 사용할 수 없습니다

E36SR05015 데이터시트, 핀배열, 회로
Delphi Series E36SR, 75W Eighth Brick Family
DC/DC Power Modules: 18~75V in, 5V/15A outwww.DataSheet4U.com
The Delphi Series E36SR Eighth Brick, 18~75V input, single output,
isolated DC/DC converter is the latest offering from a world leader in
power systems technology and manufacturing — Delta Electronics, Inc.
This product family operates from an extremely wide 18~75V input range
and provides up to 75 watts of power in an industry standard eighth brick
footprint and pinout. With creative design technology and optimization of
component placement, these converters possess outstanding electrical
and thermal performances, as well as extremely high reliability under
highly stressful operating conditions. All models are fully protected from
abnormal input/output voltage, current, and temperature conditions. The
Delphi Series converters meet all safety requirements with basic
insulation.
FEATURES
High efficiency: 89% @ 5V/ 15A
Size: 58.4mm x 22.8mm x 9.2mm
(2.30”x0.90”x0.36”)
Industry standard pin out
18~75V extremely wide 4:1 input range
Fixed frequency operation
Input UVLO, Output OCP, OVP and OTP
2250V isolation
Basic insulation
No minimum load required
SMD and through-hole versions
ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS 18001 certified manufacturing
facility
UL/cUL 60950 (US & Canada) Recognized,
and TUV (EN60950) Certified
CE mark meets 73/23/EEC and 93/68/EEC
directives.
OPTIONS
Positive On/Off logic
Short pin lengths available
SMD pin
APPLICATIONS
Telecom/Datacom
Wireless Networks
Optical Network Equipment
Server and Data Storage
Industrial/Testing Equipment
DATASHEET
DS_E36SR05015_02092007




E36SR05015 pdf, 반도체, 판매, 대치품
ELECTRICAL CHARACTERISTICS CURVES
Figure 4: Turn-on transient at full rated load current (CC mode)
(5ms/div). Vin=48V.Top Trace: Vout, 2V/div; Bottom Trace:
ON/OFF input, 5V/div
Figure 5: Turn-on transient at zero load current (5ms/div).
Vin=48V.Top Trace: Vout, 2V/div; Bottom Trace: ON/OFF input,
5V/div
Figure 6: Turn-on transient at full rated load current (CC mode)
(5ms/div). Vin=48V.Top Trace: Vout, 2V/div; Bottom Trace:
input voltage, 20V/div
Figure 7: Turn-on transient at zero load current (5ms/div).
Vin=48V.Top Trace: Vout, 2V/div; Bottom Trace: input voltage,
20V/div
DS_E36SR05015_02092007
4

4페이지










E36SR05015 전자부품, 판매, 대치품
DESIGN CONSIDERATIONS
Input Source Impedance
The impedance of the input source connecting to the
DC/DC power modules will interact with the modules and
affect the stability. A low ac-impedance input source is
recommended. If the source inductance is more than a
few µH, we advise adding a 10 to 100 µF electrolytic
capacitor (ESR < 0.7 at 100 kHz) mounted close to the
input of the module to improve the stability.
Layout and EMC Considerations
Delta’s DC/DC power modules are designed to operate
in a wide variety of systems and applications. For design
assistance with EMC compliance and related PWB
layout issues, please contact Delta’s technical support
team. An external input filter module is available for
easier EMC compliance design. Application notes to
assist designers in addressing these issues are pending
release.
Safety Considerations
The power module must be installed in compliance with
the spacing and separation requirements of the
end-user’s safety agency standard, i.e., UL60950,
CAN/CSA-C22.2 No. 60950-00 and EN60950: 2000 and
IEC60950-1999, if the system in which the power module
is to be used must meet safety agency requirements.
Basic insulation based on 75 Vdc input is provided
between the input and output of the module for the
purpose of applying insulation requirements when the
input to this DC-to-DC converter is identified as TNV-2 or
SELV. An additional evaluation is needed if the source is
other than TNV-2 or SELV.
When the input source is SELV circuit, the power module
meets SELV (safety extra-low voltage) requirements. If
the input source is a hazardous voltage which is greater
than 60 Vdc and less than or equal to 75 Vdc, for the
module’s output to meet SELV requirements, all of the
following must be met:
The input source must be insulated from the ac
mains by reinforced or double insulation.
The input terminals of the module are not operator
accessible.
If the metal baseplate is grounded, one Vi pin and
one Vo pin shall also be grounded.
A SELV reliability test is conducted on the system
where the module is used, in combination with the
module, to ensure that under a single fault,
hazardous voltage does not appear at the module’s
output.
When installed into a Class II equipment (without
grounding), spacing consideration should be given to
the end-use installation, as the spacing between the
module and mounting surface have not been evaluated.
The power module has extra-low voltage (ELV) outputs
when all inputs are ELV.
This power module is not internally fused. To achieve
optimum safety and system protection, an input line fuse
is highly recommended. The safety agencies require a
normal-blow fuse with 10A maximum rating to be
installed in the ungrounded lead. A lower rated fuse can
be used based on the maximum inrush transient energy
and maximum input current.
Soldering and Cleaning Considerations
Post solder cleaning is usually the final board assembly
process before the board or system undergoes electrical
testing. Inadequate cleaning and/or drying may lower the
reliability of a power module and severely affect the
finished circuit board assembly test. Adequate cleaning
and/or drying is especially important for un-encapsulated
and/or open frame type power modules. For assistance
on appropriate soldering and cleaning procedures,
please contact Delta’s technical support team.
DS_E36SR05015_02092007
7

7페이지


구       성 총 14 페이지수
다운로드[ E36SR05015.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
E36SR05015

75W Eighth Brick Family DC/DC Power Modules

Delta Electronics
Delta Electronics

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵