|
|
|
부품번호 | T6817 기능 |
|
|
기능 | Dual Triple DMOS Output Driver | ||
제조업체 | ATMEL Corporation | ||
로고 | |||
전체 19 페이지수
Dual Triple DMOS Output Driver
with Serial Input Control T6817
1. Introduction
The T6817 is a fully-protected universal driver interface designed in 0.8-µm BCDMOS
technology. It is used to control up to 6 different loads by a microcontroller in automo-
tive and industrial applications.
Each of the 3 high-side and 3 low-side drivers is capable of driving currents up to
600 mA. The drivers are freely configurable and can be controlled separately from a
standard serial data interface. Therefore, all kinds of loads such as bulbs, resistors,
capacitors, and inductors can be combined. The IC design particularly supports appli-
cations of H-bridges to drive DC motors.
Protection against short-circuit conditions, overtemperature, under- and overvoltage is
implemented. Various diagnostic functions and a very low quiescent current in
standby mode enable a wide range of applications. Automotive qualification with
respect to conducted interferences, EMC and 2-kV ESD protection gives added value
and enhanced quality for the demands of highly-sophistwiwcwa.DtaetadSheaet4pUp.colmications.
T6817
Driver ICs
Application Note
2. Development Board
The development board includes the following components:
• T6817 design software
• Link cable to PC 25-lead 1:1
• Application note
• Datasheet “T6817: Dual Triple DMOS Output Driver with Serial Input Control”
2.1 Description
By means of the PC-controlled development board, a user can adapt the loads (see
Figure 2-2 on page 3) easily via row connector pins. The design software interface
controls the development board.
Rev. 4783B–AUTO–11/05
Figure 2-3. ATAB6817 Basic Application Board Component Placement; Top Side, Top View
Figure 2-4. ATAB6817 Basic Application Board Top Side, Top View
4 T6817
4783B–AUTO–11/05
4페이지 T6817
Before the first dataword is sent, the IC is in standby (inhibit) mode. As soon as the 1st dataword
is sent, the IC reports the previous condition, that is, the INH bit register is set in the output. After
the second dataword, the INH bit disappears.
1. Set inhibit switch on
2. Select Send Data Loop
3. Select load to operate
3.3 Ordering Information
Please contact your appropriate Atmel Sales Office or Distributor.
Figure 3-2. Software User Interface
4783B–AUTO–11/05
7
7페이지 | |||
구 성 | 총 19 페이지수 | ||
다운로드 | [ T6817.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
T6816 | Dual Hex Output Driver | ATMEL Corporation |
T6817 | Dual Triple DMOS Output Driver | ATMEL Corporation |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |