|
|
Número de pieza | HCPL062N | |
Descripción | Dual Channel High Speed-10 MBit/s Logic Gate Optocouplers | |
Fabricantes | Fairchild Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HCPL062N (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
No Preview Available ! July 2006
HCPL062N
3.3V Dual Channel High Speed-10 MBit/s Logic Gate
Optocouplers
tm
Features
■ Compact SO8 package
■ Very high speed – 10MBit/s
■ Superior CMR – 25kV/µs minimum (1,000 volts
common mode)
■ Logic gate output
■ Wired OR-open collector
■ Fixed threshold detector design minimizes thermal
impact on switching times
■ U.L. recognized (File # E90700)
Applications
■ Ground loop elimination
■ Field buses
■ Line receiver, data transmission
■ Data multiplexing
■ Switching power supplies
■ Pulse transformer replacement
■ Computer-peripheral interface
■ Instrumentation input/output isolation
Description
The HCPL062N optocouplers consist of an AlGaAs LED,
optically coupled to a very high speed integrated photo-
detector logic gate consisting of bipolar transistors on a
CMOS process for reduced power consumption. The
output features an open collector, thereby permitting
wired OR outputs. The devices are housed in a compact
small-outline package. The coupled parameters are
guaranteed over the temperature range of -40°C to
+85°C. An internal noise shield and provides superior
common mode rejection.
Package Dimensions
0.164 (4.16)
0.144 (3.66)
Pin 1
0.202 (5.13)
0.182 (4.63)
0.143 (3.63)
0.123 (3.13)
0.019 (0.48)
0.010 (0.25)
0.006 (0.16)
0.008 (0.20)
0.021 (0.53)
0.003 (0.08)
0.011 (0.28)
0.050 (1.27)
Note:
TYP
All dimensions are in inches (millimeters)
0.244 (6.19)
0.224 (5.69)
Lead Coplanarity : 0.004 (0.10) MAX
©2006 Fairchild Semiconductor Corporation
HCPL062N Rev. 1.0.0
1
www.fairchildsemi.com
1 page Transfer Characteristics (TA = -40°C to +85°C Unless otherwise specified.)
Symbol DC Characteristics
Test Conditions
Min.
VOL Low Level Output Voltage VCC = 3.3V, IF = 5mA, IOL = 13mA
IFT Input Threshold Current
VCC = 3.3V, VO = 0.6V, IOL = 13mA
–
–
Typ.(3)
–
–
Max.
0.6
5
Unit
V
mA
Isolation Characteristics (TA = -40°C to +85°C Unless otherwise specified.)
Symbol
Characteristics
Test Conditions
Min.
II-O Input-Output
Insulation Leakage Current
VISO
Withstand Insulation Test
Voltage
Relative humidity = 45%
TA = 25°C, t = 5 sec.
VI-O = 3000 VDC, Note 10
RH < 50%, TA = 25°C
II-O ≤ 2µA, t = 1 min.,
Note 10
–
2500
RI-O Resistance (Input to Output) VI-O = 500V, Note 10
CI-O Capacitance (Input to Output) f = 1MHz, Note 10
–
–
Typ.(3)
–
–
1012
0.6
Max.
1.0
–
–
–
Unit
µA
VRMS
Ω
pF
Notes:
3. All typical values are at VCC = 3.3V, TA = 25°C unless otherwise specified.
4. tPLH – Propagation delay is measured from the 3.75 mA level on the HIGH to LOW transition of the input current
pulse to the 1.5V level on the LOW to HIGH transition of the output voltage pulse.
5. tPHL – Propagation delay is measured from the 3.75 mA level on the LOW to HIGH transition of the input current
pulse to the 1.5V level on the HIGH to LOW transition of the output voltage pulse.
6. tr – Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output pulse.
7. tf – Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output pulse.
8. CMH – The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high
state (i.e., VOUT > 2.0 V). Measured in volts per microsecond (V/µs).
9. CML – The maximum tolerable rate of fall of the common mode voltage to ensure the output will remain in the low
output state (i.e., VOUT < 0.8 V). Measured in volts per microsecond (V/µs).
10. Device considered a two-terminal device: Pins 1,2,3 and 4 shorted together, and Pins 5,6,7 and 8 shorted together.
11. The power supply bypass capacitors must be no further than 3mm from the leads of the optocoupler. A low
inductance ground plane width of with ≤ 5nHy of series lead inductance is required.
HCPL062N Rev. 1.0.0
5
www.fairchildsemi.com
5 Page Ordering Information
Option
No Suffix
R1
R2
Order Entry Identifier
HCPL062N
HCPL062NR1
HCPL062NR2
Description
Shipped in tubes (50 units per tube)
Tape and Reel (500 units per reel)
Tape and Reel (2500 units per reel)
Marking Information
1
62N
X YY S
2
5
34
Definitions
1 Fairchild logo
2 Device number
3 One digit year code, e.g., ‘3’
4 Two digit work week ranging from ‘01’ to ‘53’
5 Assembly package code
HCPL062N Rev. 1.0.0
11
www.fairchildsemi.com
11 Page |
Páginas | Total 13 Páginas | |
PDF Descargar | [ Datasheet HCPL062N.PDF ] |
Número de pieza | Descripción | Fabricantes |
HCPL062N | Dual Channel High Speed-10 MBit/s Logic Gate Optocouplers | Fairchild Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |