|
|
PDF BTA312 Data sheet ( Hoja de datos )
| Número de pieza | BTA312 | |
| Descripción | 12A 3-Quadrant Triacs High Commutation | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BTA312 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
BTA312 series CT and ET
12 A Three-quadrant triacs high commutation high
temperature
Rev. 01 — 6 April 2007
Product data sheet
1. Product profile
1.1 General description
Passivated, new generation, high commutation, high temperature triacs in a SOT78
plastic package
1.2 Features
I High operating junction temperature
I Very high commutation performance
maximized at each gate sensitivity
I High immunity to dV/dt
www.DataSheet4U.com
1.3 Applications
I High temperature, high power motor
control - e.g. vacuum cleaners
I Refrigeration and air conditioning
compressors
I Heating and cooking appliances
I Non-linear rectifier-fed motor loads
I Electronic thermostats for heating and
cooling loads
I Solid state relays
1.4 Quick reference data
I VDRM ≤ 600 V (BTA312-600CT)
I VDRM ≤ 800 V (BTA312-800ET)
I ITSM ≤ 95 A (t = 20 ms)
I IGT ≤ 35 mA (BTA312-600CT)
I IGT ≤ 10 mA (BTA312-800ET)
I IT(RMS) ≤ 12 A
2. Pinning information
Table 1.
Pin
1
2
3
mb
Pinning
Description
main terminal 1 (T1)
main terminal 2 (T2)
gate (G)
mounting base; main terminal 2 (T2)
Simplified outline
mb
Symbol
T2
sym051
T1
G
123
SOT78 (TO-220AB)
1 page  
NXP Semiconductors
BTA312 series CT and ET
12 A Three-quadrant triacs high commutation high temperature
5. Thermal characteristics
Table 4.
Symbol
Rth(j-mb)
Rth(j-a)
Thermal characteristics
Parameter
Conditions
thermal resistance from junction to half cycle; see Figure 6
mounting base
full cycle; see Figure 6
thermal resistance from junction to in free air
ambient
Min Typ Max Unit
- - 2.0 K/W
- - 1.5 K/W
- 60 - K/W
10
Zth(j-mb)
(K/W)
1
10−1
10−2
(1)
(2)
003aab775
P
www.DataSheet4U.com
10−3
10−5
10−4
10−3
10−2
10−1
tp t
1 10
tp (s)
(1) Unidirectional (half cycle)
(2) Bidirectional (full cycle)
Fig 6. Transient thermal impedance from junction to mounting base as a function of pulse duration
BTA312_SER_CT_ET_1
Product data sheet
Rev. 01 — 6 April 2007
© NXP B.V. 2007. All rights reserved.
5 of 12
5 Page 
NXP Semiconductors
BTA312 series CT and ET
12 A Three-quadrant triacs high commutation high temperature
10. Legal information
10.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet Development
Preliminary [short] data sheet Qualification
Product [short] data sheet
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
10.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
www.DataSheet4U.comoffice. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
10.3 Disclaimers
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
10.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
11. Contact information
For additional information, please visit: http://www.nxp.com
For sales office addresses, send an email to: [email protected]
BTA312_SER_CT_ET_1
Product data sheet
Rev. 01 — 6 April 2007
© NXP B.V. 2007. All rights reserved.
11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet BTA312.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BTA310X-600E | 3Q Hi-Com Triac | NXP Semiconductors |
| BTA312 | 12A 3-Quadrant Triacs High Commutation | NXP Semiconductors |
| BTA312-600D | 3Q Hi-Com Triac | NXP Semiconductors |
| BTA312-800CT | 3Q Hi-Com Triac | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |