Datasheet.kr   

XP1023-BD 데이터시트 PDF




Mimix Broadband에서 제조한 전자 부품 XP1023-BD은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 XP1023-BD 자료 제공

부품번호 XP1023-BD 기능
기능 GaAs MMIC Power Amplifier
제조업체 Mimix Broadband
로고 Mimix Broadband 로고


XP1023-BD 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 6 페이지수

미리보기를 사용할 수 없습니다

XP1023-BD 데이터시트, 핀배열, 회로
24.0-34.0 GHz GaAs MMIC
Power Amplifier
April 2007 - Rev 17-Apr-07
Features
Excellent Saturated Output Stage
16.0 dB Small Signal Gain
+24.0 dBm Saturated Output Power
100% On-Wafer RF, DC and Output Power Testing
100% Visual Inspection to MIL-STD-883
Method 2010
P1023-BD
Chip Device Layout
XP1023-BD
General Description
Mimix Broadband’s three stage 24.0-34.0 GHz GaAs
MMIC power amplifier has a small signal gain of 16.0
dB with a +24.0 dBm saturated output power.This
MMIC uses Mimix Broadband’s 0.15 µm GaAs PHEMT
device model technology, and is based upon electron
beam lithography to ensure high repeatability and
uniformity.The chip has surface passivation to protect
and provide a rugged part with backside via holes
and gold metallization to allow either a conductive
epoxy or eutectic solder die attach process.This
www.DataSheet4U.com
device is well suited for Millimeter-wave
Point-to-Point Radio, LMDS, SATCOM and VSAT
applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id)
Gate Bias Voltage (Vg)
Input Power (Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+9.0 VDC
650 mA
+0.3 VDC
+17.0 dBm
-65 to +165 OC
-55 to MTTF Table1
MTTF Table1
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 oC)
Parameter
Frequency Range (f )
Input Return Loss (S11)
Output Return Loss (S22)
Small Signal Gain (S21)
Gain Flatness ( S21)
Reverse Isolation (S12)
Saturated Output Power (Psat)
Drain Bias Voltage (Vd1,2,3)
Gate Bias Voltage (Vg1,2,3)
Supply Current (Id) (Vd=6.0V, Vg=-0.9V Typical)
Units Min. Typ. Max.
GHz 24.0 - 34.0
dB - 8.0 -
dB - 8.0 -
dB - 16.0 -
dB - +/-1.0 -
dB - 50.0 -
dBm - +24.0 -
VDC - +6.0 +8.0
VDC -1.0 -0.9 0.1
mA - 320 480
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.




XP1023-BD pdf, 반도체, 판매, 대치품
24.0-34.0 GHz GaAs MMIC
Power Amplifier
April 2007 - Rev 17-Apr-07
P1023-BD
App Note [1] Biasing - It is recommended to separately bias each amplifier stage Vd1 through Vd3 at Vd(1,2,3)=6.0V with Id1=50mA,
Id2=90mA and Id3=180mA. Separate biasing is recommended if the amplifier is to be used at high levels of saturation, where gate
rectification will alter the effective gate control voltage. For non-critical applications it is possible to parallel all stages and adjust the
common gate voltage for a total drain current Id(total)=320 mA. It is also recommended to use active biasing to keep the currents
constant as the RF power and temperature vary; this gives the most reproducible results. Depending on the supply voltage available
and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with a low
value resistor in series with the drain supply used to sense the current.The gate of the pHEMT is controlled to maintain correct drain
current and thus drain voltage. The typical gate voltage needed to do this is -0.9V.Typically the gate is protected with Silicon diodes
to limit the applied voltage. Also, make sure to sequence the applied voltage to ensure negative gate bias is available before
applying the positive drain supply.
App Note [2] Bias Arrangement -
For Parallel Stage Bias (Recommended for general applications) -- The same as Individual Stage Bias but all the drain or gate pad DC
bypass capacitors (~1000-2200 pF) can be combined. Additional DC bypass capacitance (~0.01 uF) is also recommended to all DC or
combination (if gate or drains are tied together) of DC bias pads.
For individual Stage Bias (Recommended for saturated applications) -- Each DC pad (Vd1, 2, 3 and Vg1, 2, 3) needs to have DC bypass
capacitance (~1000-2200 pF) as close to the device as possible. Additional DC bypass capacitance (~0.01 uF) is also recommended.
MTTF Tables
These numbers were calculated based on accelerated life test information and thermal model analysis received from the fabricating foundry.
Backplate
Temperature
55 deg Celsius
75 deg Celsius
95 deg Celsius
Channel
Temperature
176.3 deg Celsius
204.0 deg Celsius
231.1 deg Celsius
Rth
63.8° C/W
67.8° C/W
71.6° C/W
MTTF Hours
FITs
9.79E+06
9.32E+05
1.21E+05
1.02E+02
1.07E+03
8.30E+03
Bias Conditions: Vd1=Vd2=Vd3=6.0V, Id1=50 mA, Id2=90 mA, Id3=180 mA
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 6
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.

4페이지












구       성 총 6 페이지수
다운로드[ XP1023-BD.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
XP1023-BD

GaAs MMIC Power Amplifier

Mimix Broadband
Mimix Broadband

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵