XR1006 Datasheet PDF - Mimix Broadband
| Part Number | XR1006 | |
| Description | GaAs MMIC Receiver | |
| Manufacturers | Mimix Broadband | |
| Logo |  |
|
|
There is a preview and XR1006 download ( pdf file ) link at the bottom of this page. Total 7 Pages | ||
Preview 1 page No Preview Available !
18.0-25.0 GHz GaAs MMIC
Receiver
May 2005 - Rev 13-May-05
Features
Chip Device Layout
R1006
Sub-harmonic Receiver
Integrated LNA, LO Buffer, Image Reject Mixer
+2.0 dBm LO Drive Level
2.5 dB Noise Figure
15.0 dB Image Rejection
100% On-Wafer RF, DC and Noise Figure Testing
100% Visual Inspection to MIL-STD-883 Method 2010
General Description
Mimix Broadband’s 18.0-25.0 GHz GaAs MMIC receiver has a noise
figure of 2.5 dB and 15.0 dB image rejection across the band.This
device is a two stage balanced LNA followed by an image reject sub-
harmonic anti-parallel diode mixer and includes an integrated LO
buffer amplifer.The image reject mixer eliminates the need for a
bandpass filter after the LNA to remove thermal noise at the image
frequency. The use of a sub-harmonic mixer makes the provision of
the LO easier than for fundamental mixers at these frequencies. I and Q
mixer outputs are provided and an external 90 degree hybrid is
required to select the desired sideband. This MMIC uses Mimix
Broadband’s 0.15 µm GaAs PHEMT device model technology, and is
based upon electron beam lithography to ensure high repeatability
and uniformity.The chip has surface passivation to protect and provide
a rugged part with backside via holes and gold metallization to allow
www.DataSheet4U.com either a conductive epoxy or eutectic solder die attach process. This
device is well suited for Millimeter-wave Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id1,Id2)
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+4.5 VDC
180, 165 mA
+0.3 VDC
0.0 dBm
-65 to +165 OC
-55 to MTTF Table3
MTTF Table3
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
GHz 18.0 - 25.0
Frequency Range (RF) Lower Side Band
GHz 18.0 - 21.0
Frequency Range (LO)
GHz 7.5
- 11.5
Frequency Range (IF)
GHz DC - 3.0
Input Return Loss RF (S11)
Small Signal Conversion Gain RF/IF (S21) 2
dB - 12.0 -
dB - 8.0 -
LO Input Drive (PLO)
Image Rejection 2
Noise Figure (NF) 2
dBm - +2.0 -
dBc - 15.0 -
dB - 2.5 -
Isolation LO/RF @ LOx1/LOx2
Input Third Order Intercept (IIP3)1,2
dB
dBm
- 50.0/60.0 -
- -7.0 -
Drain Bias Voltage (Vd1)
VDC - +3.5 +4.5
Drain Bias Voltage (Vd2)
VDC - +4.0 +4.5
Gate Bias Voltage (Vg1,2)
VDC -1.2 -0.3 +0.1
Supply Current (Id1) (Vd1=3.5V, Vg=-0.3V Typical)
mA - 130 155
Supply Current (Id2) (Vd2=4.0V,Vg=-0.3V Typical)
mA - 116 140
(1) Measured using constant current.
(2) Measured using LO Input drive level of +2.0 dBm.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
|
| |
 
18.0-25.0 GHz GaAs MMIC
Receiver
May 2005 - Rev 13-May-05
App Note [3] USB/LSB Selection -
LSB USB
IF2 IF1
An alternate method of Selection of USB or LSB:
USB
R1006
For Upper Side Band operation (USB):
With IF1 and IF2 connected to the
direct port (0º) and coupled port (90º)
respectively as shown in the diagram,
the USB signal will reside on the
isolated port. The input port must be
loaded with 50 ohms.
For Lower Side Band operation (LSB):
With IF1 and IF2 connected to the
direct port (0º) and coupled port (90º)
respectively as shown in the diagram,
the LSB signal will reside on the input
port. The isolated port must be loaded
with 50 ohms.
LSB
In Phase Combiner
o
-90
IF2 IF1
In Phase Combiner
o
-90
IF2 IF1
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 7
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for XR1006 electronic component. |
| Information | Total 7 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ XR1006.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| XR1000 | The function is GaAs MMIC Receiver. Mimix Broadband | |
| XR1001 | The function is GaAs MMIC Receiver. Mimix Broadband | |
| XR1002 | The function is GaAs MMIC Receiver. Mimix Broadband | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
XR10
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||