Datasheet.kr   

EL1510 데이터시트 PDF




Intersil Corporation에서 제조한 전자 부품 EL1510은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 EL1510 자료 제공

부품번호 EL1510 기능
기능 Medium Power Differential Line Driver
제조업체 Intersil Corporation
로고 Intersil Corporation 로고


EL1510 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 10 페이지수

미리보기를 사용할 수 없습니다

EL1510 데이터시트, 핀배열, 회로
®
Data Sheet
March 26, 2007
EL1510
FN7122.2
Medium Power Differential Line Driver
The EL1510 is a dual operational amplifier designed for
central office and customer premise line driving in both
SDSL and ADSL solutions. This device features a high drive
capability of 250mA while consuming only 7.5mA of supply
current per amplifier, operating from ±12V supplies. This
driver achieves a typical distortion of less than -85dBc, at
150kHz into a 25Ω load. The EL1510 is available in the
power 8 Ld DFN package and is specified for operation over
the full -40°C to +85°C temperature range. The DFN
package has the potential for a very low junction to ambient
thermal resistance of 43°C/W, making it suitable for high
power applications. The EL1510 is in the 8 Ld SOIC
package and thus is limited to applications where the power
dissipation in the device is less than 781mW.
The EL1510 is ideal for CPE modem applications in ADSL,
HDSL2, G.SHDSL, and VDSL.
Pinouts
EL1510
(8 LD SOIC)
TOP VIEW
OUTA 1
8 VS
INA- 2
-
7 OUTB
+
INA+ 3
6 INB-
-
GND 4
+ 5 INB+
EL1510
(8 LD DFN)
TOP VIEW
OUTA 1
INA- 2
INA+ 3
GND 4
-
+
Amp A
-
+
Amp B
8 VS
7 OUTB
6 INB-
5 INB+
Features
• 40VP-P differential output drive into 100Ω
• -85dBc typical driver output distortion at full output at
150kHz
• Low quiescent current of 7.5mA per amplifier
• Pb-free plus anneal available (RoHS compliant)
Applications
• ADSL G.lite CO line driving
• G.SHDSL, HDSL2 line drivers
• ADSL full rate CPE line driving
• Video distribution amplifiers
• Video twisted-pair line drivers
Ordering Information
PART TAPE &
PKG.
PART NUMBER MARKING REEL PACKAGE DWG. #
EL1510CS
1510CS
- 8 Ld SOIC MDP0027
EL1510CS-T7 1510CS
7” 8 Ld SOIC MDP0027
EL1510CS-T13 1510CS
13” 8 Ld SOIC MDP0027
EL1510CSZ
(See Note)
1510CSZ
- 8 Ld SOIC MDP0027
(Pb-Free)
EL1510CSZ-T7 1510CSZ
(See Note)
7” 8 Ld SOIC MDP0027
(Pb-Free)
EL1510CSZ-T13 1510CSZ
(See Note)
13” 8 Ld SOIC MDP0027
(Pb-Free)
EL1510CL
1510CL
- 8 Ld DFN MDP0047
EL1510CL-T7 1510CL
7” 8 Ld DFN MDP0047
EL1510CL-T13 1510CL
13” 8 Ld DFN MDP0047
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020C.
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002, 2004, 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.




EL1510 pdf, 반도체, 판매, 대치품
EL1510
Typical Performance Curves (Continued)
-50
VS=±6V
-55 AV=5
RF=1.5kΩ
-60 RL=100Ω
f=1MHz
-65
-70 HD3
-75
-80
HD2
-85
-90
1 3 5 7 9 11 13 15 17 19
VOP-P (V)
FIGURE 7. DIFFERENTIAL HARMONIC DISTORTION vs
DIFFERENTIAL OUTPUT VOLTAGE - ALL
PACKAGES
-50
VS=±12V
-55 AV=5
RF=1.5kΩ
-60 RL=100Ω
f=1MHz
-65
-70
HD3
-75
-80
-85 HD2
-90
1 5 9 13 17 21 25 29 33 37 41 45
VOP-P (V)
FIGURE 9. DIFFERENTIAL HARMONIC DISTORTION vs
DIFFERENTIAL OUTPUT VOLTAGE - ALL
PACKAGES
-50
AV=5
-55 RF=1.5kΩ
RL=100Ω
f=1MHz
-60
-65
-70 VS=±6V
VS=±12V
-75
-80
-85
1 5 9 13 17 21 25 29 33 37 41 45
VOP-P (V)
FIGURE 11. DIFFERENTIAL TOTAL HARMONIC DISTORTION
vs DIFFERENTIAL OUTPUT VOLTAGE - ALL
PACKAGES
-40
VS=±12V
-50
RLOAD=200Ω (DIFF)
AV=10 & 15
-60
-70
100kHz
200kHz
-80
-90 50kHz
-100
0
5 10 15 20
VOUT PTP (V)
FIGURE 8. DISTORTION RESULTS
25
-30
VS=±6V
-40
RLOAD=200Ω (DIFF)
AV=10 & 15
-50
-60
-70
-80
50kHz
-90
012
100kHz
200kHz
3 4 5 6 7 8 9 10
VOUT PTP (V)
FIGURE 10. DISTORTION RESULTS
100
VS=±12V
AV=1
10 RF=1.5kΩ
1
0.1
0.01
0.001
10K
100K
1M
10M
FREQUENCY (Hz)
100M
FIGURE 12. OUTPUT IMPEDANCE vs FREQUENCY
4 FN7122.2
March 26, 2007

4페이지










EL1510 전자부품, 판매, 대치품
EL1510
Typical Performance Curves (Continued)
3.5
3
2.5
2
1.5
1
0.5
0
-50 -25
0 25 50 75 100 125 150
DIE TEMPERATURE (°C)
FIGURE 25. TRANSIMPEDANCE vs TEMPERATURE
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD - DFN EXPOSED
4.5 DIEPAD SOLDERED TO PCB PER JESD51-5
4
3.5
3 2.907W
2.5
2
θJA
DFN8
=43°C/W
1.5
1
0.5
0
0 25 50 75 85 100 125 150
AMBIENT TEMPERATURE (°C)
FIGURE 27. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1.8
1.6
1.4
1.2 1.136W
1
0.8
θJA
SO8
=110°C/W
0.6
0.4
0.2
0
0 25 50 75 85 100 125
AMBIENT TEMPERATURE (°C)
150
FIGURE 26. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1.2
1
781mW
0.8
0.6 θJA =S1O680°&C/DWFN8
0.4
0.2
0
0 25 50 75 85 100 125 150
AMBIENT TEMPERATURE (°C)
FIGURE 28. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
Applications Information
Product Description
The EL1510 is a dual operational amplifier designed for line
driving in DMT ADSL solutions. It is a dual current mode
feedback amplifier with low distortion while drawing
moderately low supply current. It is built using Elantec's
proprietary complimentary bipolar process and is offered in
industry standard pin-outs. Due to the current feedback
architecture, the EL1510 closed-loop 3dB bandwidth is
dependent on the value of the feedback resistor. First the
desired bandwidth is selected by choosing the feedback
resistor, RF, and then the gain is set by picking the gain
resistor, RG. The curves at the beginning of the Typical
Performance Curves section show the effect of varying both
RF and RG. The 3dB bandwidth is somewhat dependent on
the power supply voltage.
Power Supply Bypassing and Printed Circuit
Board Layout
As with any high frequency device, good printed circuit
board layout is necessary for optimum performance. Ground
plane construction is highly recommended. Lead lengths
should be as short as possible, below ¼”. The power supply
pins must be well bypassed to reduce the risk of oscillation.
A 1.0µF tantalum capacitor in parallel with a 0.01µF ceramic
capacitor is adequate for each supply pin.
For good AC performance, parasitic capacitances should be
kept to a minimum, especially at the inverting input. This
implies keeping the ground plane away from this pin. Carbon
resistors are acceptable, while use of wire-wound resistors
should not be used because of their parasitic inductance.
Similarly, capacitors should be low inductance for best
performance.
7 FN7122.2
March 26, 2007

7페이지


구       성 총 10 페이지수
다운로드[ EL1510.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
EL151

60w Endpentode

TELEFUNKEN
TELEFUNKEN
EL1510

Medium Power Differential Line Driver

Intersil Corporation
Intersil Corporation

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵