Datasheet.kr   

EL5108 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 EL5108
기능 (EL5108 / EL5308) 450MHz Fixed Gain Amplifiers
제조업체 Intersil Corporation
로고 Intersil Corporation 로고 



전체 13 페이지

		

No Preview Available !

EL5108 데이터시트, 핀배열, 회로
®
Data Sheet
EL5108, EL5308
June 15, 2006
FN7358.5
450MHz Fixed Gain Amplifiers with Enable
The EL5108 and EL5308 are fixed gain amplifiers with a
bandwidth of 450MHz. This makes these amplifiers ideal for
today’s high speed video and monitor applications. They
feature internal gain-setting resistors and can be configured
in a gain of +1, -1 or +2. The same bandwidth is seen in both
gain-of-1 and gain-of-2 applications.
The EL5108 and EL5308 also incorporate an enable and
disable function to reduce the supply current to 25µA typical
per amplifier. Allowing the CE pin to float or applying a low
logic level will enable the amplifier.
The EL5108 is offered in the 6 Ld SOT-23 and the industry-
standard 8 Ld SO packages and the EL5308 is available in
the 16 Ld SO and 16 Ld QSOP packages. All operate over
the industrial temperature range of -40°C to +85°C.
Features
• Pb-free plus anneal available (RoHS compliant)
• Gain selectable (+1, -1, +2)
• 450MHz -3dB BW (AV = -1, +1, +2)
• 3.5mA supply current per amplifier
• Single and dual supply operation, from 5V to 12V
• Available in SOT-23 packages
• 350MHz, 1.5mA product available (EL5106 & EL5306)
Applications
• Battery powered equipment
• Handheld, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
Ordering Information
PART NUMBER
PART MARKING
PACKAGE
TAPE & REEL
PKG. DWG. #
EL5108IW-T7
r
6 Ld SOT-23
7” (3K pcs)
MDP0038
EL5108IW-T7A
r
6 Ld SOT-23
7” (250 pcs)
MDP0038
EL5108IS
5108IS
8 Ld SO
- MDP0027
EL5108IS-T7
5108IS
8 Ld SO
7” MDP0027
EL5108IS-T13
5108IS
8 Ld SO
13” MDP0027
EL5108ISZ (See Note)
5108ISZ
8 Ld SO
- MDP0027
EL5108ISZ-T7 (See Note) 5108ISZ
8 Ld SO
7” MDP0027
EL5108ISZ-T13 (See Note) 5108ISZ
8 Ld SO
13” MDP0027
EL5308IS
EL5308IS
16 Ld SO (0.150”)
- MDP0027
EL5308IS-T7
EL5308IS
16 Ld SO (0.150”)
7” MDP0027
EL5308IS-T13
EL5308IS
16 Ld SO (0.150”)
13” MDP0027
EL5308IU
5308IU
16 Ld QSOP
- MDP0040
EL5308IU-T7
5308IU
16 Ld QSOP
7” MDP0040
EL5308IU-T13
5308IU
16 Ld QSOP
13” MDP0040
EL5308IUZ (See Note)
5308IUZ
16 Ld QSOP (Pb-free)
- MDP0040
EL5308IUZ-T7 (See Note) 5308IUZ
16 Ld QSOP (Pb-free)
7” MDP0040
EL5308IUZ-T13 (See Note) 5308IUZ
16 Ld QSOP (Pb-free)
13” MDP0040
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2004, 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.




EL5108 pdf, 반도체, 판매, 대치품
EL5108, EL5308
Electrical Specifications VS+ = +5V, VS- = -5V, RL = 150, TA = 25°C unless otherwise specified. (Continued)
PARAMETER
DESCRIPTION
CONDITIONS
MIN TYP
MAX
ENABLE
tEN Enable Time
280
tDIS Disable Time (Note 2)
560
IIHCE
CE Pin Input High Current
CE = VS+
-1 5 25
IILCE
CE Pin Input Low Current
CE = VS-
+1 -1
VIHCE
CE Input High Voltage for Power-down
VS+ -1
VILCE
CE Input Low Voltage for Enable
VS+ -3
NOTES:
1. Standard NTSC test, AC signal amplitude = 286mVP-P, f = 3.58MHz
2. Measured from the application of the CE logic signal until the output voltage is at the 50% point between initial and final values
UNIT
ns
ns
µA
µA
V
V
Pin Descriptions
EL5108
(SO8)
1, 5
2
EL5108
(SOT23-6)
4
EL5308
(SO16,
QSOP16)
6, 11
9, 12, 16
PIN NAME
FUNCTION
NC Not connected
IN- Inverting input
EQUIVALENT CIRCUIT
RG
IN+ IN-
RF
3
3
1, 5, 8
IN+ Non-inverting input
4 2 3 VS- Negative supply
6
1
10, 13, 15
OUT Output
CIRCUIT 1
(Reference Circuit 1)
OUT
RF
7 6 14 VS+ Positive supply
8
5
2, 4, 7
CE Chip enable
CIRCUIT 2
VS+
CE
CIRCUIT 3
VS-
4 FN7358.5
June 15, 2006

4페이지










EL5108 전자부품, 판매, 대치품
EL5108, EL5308
Typical Performance Curves (Continued)
-40 VS=±5V
AV=2
-50
RL=150
VO=2VP-P
-60
HD2
HD3
-70
-80
-90
0
10 20 30 40 50 60
FREQUENCY (MHz)
FIGURE 13. DISTORTION vs FREQUENCY
3.9
3.7
3.5 IS+, IS-
3.3
3.1
2.9
2.7
2.5
4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11
VS (V)
FIGURE 14. SUPPLY CURRENT vs SUPPLY VOLTAGE
VO=±2V
1V/DIV
VO=±200mV
100mV/DIV
10ns/DIV
FIGURE 15. LARGE SIGNAL RESPONSE
CH1 2.00V/DIV
M=100ns
CH2 1.00V/DIV
10ns/DIV
FIGURE 16. SMALL SIGNAL RESPONSE
M=100ns
CH1 2.00V/DIV
CH2 1.00V/DIV
FIGURE 17. DISABLED RESPONSE
7
FIGURE 18. ENABLED RESPONSE
FN7358.5
June 15, 2006

7페이지



구       성총 13 페이지
다운로드[ EL5108.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

상호 : 아이지 인터내셔날

사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
EL5100

200MHz Slew Enhanced VFA

Intersil Corporation
Intersil Corporation
EL5100IS

200MHz Slew Enhanced VFA

Intersil Corporation
Intersil Corporation

DataSheet.kr    |   2020   |  연락처   |  링크모음   |   검색  |   사이트맵