|
|
Número de pieza | SIT | |
Descripción | SNAP-IN ALUMINUM ELECTROLYTIC | |
Fabricantes | NTE Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SIT (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! 105°C SNAP–IN ALUMINUM ELECTROLYTIC
SIT SERIES
SUBMINIATURE
(SIT: High Temperature Snap–in)
The SIT Snap–in series subminiature aluminum electrolytic ca-
pacitors are especially suitable for applications requiring high ca-
pacitance, low cost, and very small size. In fact, you’ll find these
capacitors in some of the most demanding applications, from
precision medical electronics and automobiles to the newest
personal computers and disk drives.
They operate over a broad temperature range and are available
in either blister pack or bulk.
RATINGS
Capacitance Range: 100µf to 10,000µf
Tolerance: ±20%
Voltage Range: 50V to 250V
PERFORMANCE SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Marking:
Consists of series type, nominal capacitance, rated
voltage, temperature range, anode and/or cathode
identification, vendor identification.
Recommended Cleaning Solvents:
Chlorofluorocarbon solvents used to remove flux from
printed circuit boards can penetrate the capacitor end–
seals, cause corrosion when voltage is applied and ca-
pacitor failure. Avoid halogenated solvents and consid-
er these alternatives: Clean the capacitors with
water/detergent or cleaning solvents free of halogen
groups such as alcohol or terpene solution, or mount
the capacitor after board cleaning.
CASE SIZE AND DIMENSIONS:
Operating Temperature Range:
–40°C to +105°C (–40°F to +221°F)
Leakage Current: I ≤ 3 x √CV (measured after
5 minutes @ rated voltage and +20°C (+68°F)
I = Leakage Current (µA)
C = Nominal Capacitance (µf)
V = Rated Voltage (V)
Capacitance Tolerance (M): ±20%
www.DataSheet4U.com
measured at +20°C (+68°F), 120HZ
Surge Voltage:
DC Rated Voltage
50
200 250
Surge Voltage
63 250 300
Load Life: 2000 ±12Hrs @ Max rated temperature
and rated voltage
Leakage Current: Within values specified above
Dissipation Factor: Within ±150% of specified value
SIT SERIES
Polarity Bar
Safety Vent
Vinyl Sleeve
10.0
L+2
Max
2 ±0.1
Dia
10 ±0.1
6.3 ±1
0.8
+0.2
–0.1
DØ+1
Max
2.0 Max
1.5 ±0.2
6.3 ±1
4.0
DØ
PC Board Mounting Holes
Terminal
Shelf Life: 1000 ±6Hrs @ Max rated temperature,
no voltage applied
Leakage Current: Within ±200% of specified value
Dissipation Factor: Within ±150% of specified value
Capacitance Change Max: Within ±20% of initial value
ORDERING INFORMATION
SIT 1000
Series
Capacitance
Tolerance
Voltage
M
50
14 NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet SIT.PDF ] |
Número de pieza | Descripción | Fabricantes |
SI-10022 | SI-10022 | ETC |
SI-1010G | Hybrid Audio Power-Output Amplifier | Sanken |
SI-1020G | Hybrid Audio Power-Output Amplifier | Sanken |
SI-10267 | BEL STEWART CONNECTOR | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |