DataSheet.es    


PDF LM49270 Data sheet ( Hoja de datos )

Número de pieza LM49270
Descripción Filterless 2.2W Stereo Class D Audio Subsystem
Fabricantes National Semiconductor 
Logotipo National Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de LM49270 (archivo pdf) en la parte inferior de esta página.


Total 24 Páginas

No Preview Available ! LM49270 Hoja de datos, Descripción, Manual

December 2006
LM49270
Filterless 2.2W Stereo Class D Audio Subsystem with OCL
Headphone Amplifier, 3D Enhancement, and Headphone
Sense
General Description
The LM49270 is a fully integrated audio subsystem designed
for stereo multimedia applications. The LM49270 combines a
2.2W stereo Class D amplifier with a 155mW stereo head-
phone amplifier, volume control, headphone sense, and
National’s unique 3D sound enhancement into a single de-
vice. The LM49270 uses flexible I2C control interface for
multiple application requirements.
The filterless stereo class D amplifiers delivers 2.2W/channel
into a 4load with less than 10% THD+N with a 5V supply.
The headphone amplifier features National’s Output Capaci-
tor-less (OCL) architecture that eliminates the output coupling
capacitors required by traditional headphone amplifiers.
The IC features a headphone sense input (HPS) that auto-
matically detects the presence of a headphone and config-
ures the device accordingly. The LM49270 can automatically
switch from OCL headphone output to a line driver output. If
the VOC pin is pulled to GND, the VOC amplifier is disabled
and the VOC pin is internally set to GND. This feature allows
the LM49270 to be used as a line driver in OCL mode without
a GND conflict on the headphone jack sleeve. Additionally,
the headphone amplifier can be configured as capacitively
coupled (CC).
The LM49270 features a 32 step volume control for the head-
phone and stereo outputs. The device mode select and vol-
ume are controlled through an I2C compatible interface.
Output short circuit and thermal shutdown protection prevent
the device from being damaged during fault conditions. Su-
perior click and pop suppression eliminates audible transients
on power-up/down and during shutdown. The LM49270 is
available in a space saving 28-pin, 5x5mm LLP package.
Key Specifications
■ Stereo Class D Amplifier Efficiency:
VDD = 3.3V, 450mW/Ch into 8
VDD = 5V, 1W/Ch into 8
■ Quiescent Power Supply Current, VDD = 3.3V
Speaker Mode
Headphone Mode (OCL)
■ Power Output/Channel, VDD = 5V
Class D Speaker amplifier:
RL = 4Ω, THD+N = 10%
RL = 8Ω, THD+N = 1%
Headphone amplifier:
RL = 16Ω, THD+N = 1%
RL = 32Ω, THD+N = 1%
■ Shutdown current
84%
84%
5.5mA
4mA
2.2W
1.06W
155mW
90mW
0.02μA
Features
Stereo filterless Class D amplifier
Selectable OCL/CC headphone amplifier
Headphone sense ability
National’s 3D Enhancement
RF suppression
I2C control interface
32-step digital volume control
6 Operating Modes
Output short circuit protection and thermal shutdown
protection
Minimum external components
Click and Pop suppression
Micro-power shutdown
Independent speaker and headphone volume controls
Available in space-saving 28 pin LLP package
Applications
Portable DVD players
Smart phones
PDAs
Laptops
Boomer® is a registered trademark of National Semiconductor Corporation.
© 2007 National Semiconductor Corporation 202129
www.national.com

1 page




LM49270 pdf
Absolute Maximum Ratings (Notes 1, 2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Thermal Resistance
 θJA
Operating Ratings (Notes 1, 2)
35.1°C/W
Supply Voltage (Note 1)
Storage Temperature
Input Voltage
Power Dissipation (Note 3)
ESD Susceptibility(Note 4)
ESD Susceptibility (Note 5)
Junction Temperature (TJMAX)
6.0V
−65°C to +150°C
–0.3V to VDD +0.3V
Internally Limited
2000V
200V
150°C
Temperature Range
TMIN TA TMAX
Supply Voltage
(VDD, LSVDD, HPVDD)
I2C Voltage (I2CVDD)
−40°C TA 85°C
2.4V VDD 5.5V
2.4V I2CVDD 5.5V
Electrical Characteristics VDD = 3.3V (Notes 1, 2) The following specifications apply for Headphone:
AV = 0dB, RL(HP) = 32Ω; for Loudspeakers: AV = 6dB, RL(SP) = 15μH + 8Ω + 15μH , f = 1kHz, unless otherwise specified. Limits
apply for TA = 25°C.
Symbol
Parameter
Conditions
LM49270
Typical
Limit
(Note 6) (Notes 7, 8)
Units
(Limits)
IDD Supply Current
VIN = 0, RL = No Load,
Both channels active
Speaker ON, HP OFF
Speaker OFF, CC HP ON
Speaker OFF, OCL HP ON
5.5 7.6 mA (max)
3 4.7 mA (max)
4 5.75 mA (max)
ISD Shutdown Supply Current
VOS
Output Offset Voltage
Headphone
Speaker
0.02 2 μA (max)
10 25 mV (max)
10 60 mV (max)
Speaker Mode, f = 1kHz
THD+N = 1%
RL = 4Ω
RL = 8Ω
THD+N = 10%
RL = 4Ω
RL = 8Ω
CC Headphone Mode, f = 1kHz
700
450
870
560
mW
400 mW (min)
mW
mW
POUT
Output Power
THD+N = 1%
RL = 16Ω
RL = 32Ω
THD+N = 10%
RL = 16Ω
RL = 32Ω
OCL Headphone Mode, f = 1kHz
60
36
74
55
mW
30 mW (min)
mW
mW
THD+N = 1%
RL = 16Ω
RL = 32Ω
THD+N = 10%
RL = 16Ω
RL = 32Ω
60 mW
36 30 mW (min)
73 mW
55 mW
5 www.national.com

5 Page





LM49270 arduino
THD+N vs Frequency
OCL Headphone Mode
VDD = 3.3V, POUT = 25mW, RL = 32Ω
THD+N vs Frequency
OCL Headphone Mode
VDD = 5V, POUT = 70mW, RL = 32Ω
20212912
THD+N vs Frequency
CC Headphone Mode
VDD = 3.3V, POUT = 45mW, RL = 16Ω
20212913
THD+N vs Frequency
CC Headphone Mode
VDD = 5V, POUT = 100mW, RL = 16Ω
20212916
THD+N vs Frequency
CC Headphone Mode
VDD = 3.3V, POUT = 25mW, RL = 32Ω
20212917
THD+N vs Frequency
CC Headphone Mode
VDD = 5V, POUT = 70mW, RL = 32Ω
20212918
11
20212919
www.national.com

11 Page







PáginasTotal 24 Páginas
PDF Descargar[ Datasheet LM49270.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LM4927LM4927 2.5 Watt Fully Differential Audio Power Amplifier With Shutdown (Rev. B)Texas Instruments
Texas Instruments
LM49272.5 Watt Fully Differential Audio Power AmplifierNational Semiconductor
National Semiconductor
LM49270Filterless 2.2W Stereo Class D w/OCL Headphone Amp 3D Enhance Headphone Sense (Rev. B)Texas Instruments
Texas Instruments
LM49270Filterless 2.2W Stereo Class D Audio SubsystemNational Semiconductor
National Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar