|
|
PDF MF-27WTA-M01MAxxx Data sheet ( Hoja de datos )
| Número de pieza | MF-27WTA-M01MAxxx | |
| Descripción | (MF-27WTA-M0xMAxxx) 2.7Gb/s Multi-rate WDM Transmitter | |
| Fabricantes | Mitsubishi Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MF-27WTA-M01MAxxx (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
Mitsubishi Electric Corp.
Datasheet
MITSUBISHI (OPTICAL DEVICES)
MF-27WTA-M0xMAxxx
2.7Gb/s Multi-rate WDM Transmitter
Description
The MF-27WTA transmitters are designed
for use in transmission systems and
high-speed data communication
applications. This transmitter operates
from 155Mb/s up to 2.7Gb/s data rate.
This device has a cooled DFB Laser
Diode and ATC function for 100GHz grid
WDM applications.
Features
• Data rates 155Mb/s to 2.7Gb/s
www.DataSheet4U.com
• ITU-T/SONET compliant STM-16 / OC-48
• Two adjacent wavelength selectable at 100GHz WDM spacing of C-Band
• Transmission target distance up to 90km / 160km (1800ps/nm / 3200ps/nm)
• Optical average power output +7dBm typical
• Operating case temperature range: -5 to +70 °C
• With Cooled-DFB-LD direct modulation
• Clocked-mode (using D-FF) and Non-clocked-mode available
• +5V , +3.3V power supply
• 24pin package
• Package size 73 × 51 × 12.7 mm
• Multi-source WDM Transmitter
Applications
• Telecommunications ITU-T/SONET STM-16/OC-48
• Metropolitan area networks
• High speed data communications
UQ9-04-006 Ed:1.0 Date:22.Dec.2004
Page 1 of 9
1 page  
MITSUBISHI (OPTICAL DEVICES)
MF-27WTA-M0xMAxxx
2.7Gb/s Multi-rate WDM Transmitter
Electrical characteristics
All parameters are specified over the operating case temperature.
Measurement conditions are at NRZ PN223-1 and 50% duty cycle data signal.
Parameters
Positive supply voltage
Positive supply current
TEC supply voltage
TEC supply current
Power dissipation
Input sensitivity data & clock
voltage
Bit rate
SDC,SELC,WSC High level input
SDC,SELC,WSC Low level input
LDA,TDA High level output
LDA,TDA Low level output
Normalized back face voltage
Normalized back face accuracy
Logic level inputs
Cond
note 3
-
note 3
-
Total
Single-ended
note 4
note 5
Isource=200uA
Isink=-10uA
Isource=4mA
Isink=-0.5mA
note 6
note 6
-
Symb
VCC
ICC
VTEC
ITEC
-
SV
-
-
-
-
-
-
-
-
Min
4.75
-
3.1
-
-
0.4
0.155
2
0
2.7
0
-
- 10
Typ
5
-
3.3
-
-
0.8
-
-
-
-
-
500
-
TTL compatible
Max
5.25
400
3.5
1200
5.2
1.3
2.7
Vcc
0.8
Vcc
0.5
-
+ 10
note 3 : Tolerable broadband noise on the power rail is under 50mVpp with frequency range of 50Hz to 1MHz.
note 4 : Internally, AC coupled with 50 Ω termination.
note 5 : If transmitter is used at more than 1.25Gb/s bit rate, Clocked-mode must be selected.
note 6 : Back face voltage is measured with a GND reference and normalized at the beginning of life relative to
the initial optical output power.
For example, a 50% drift in output power correlates to a 50% variation on the detected back face voltage.
Unit
V
mA
V
mA
W
Vpp
Gb/s
V
V
V
V
mV
%
-
UQ9-04-006 Ed:1.0 Date:22.Dec.2004
Page 5 of 9
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet MF-27WTA-M01MAxxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MF-27WTA-M01MAxxx | (MF-27WTA-M0xMAxxx) 2.7Gb/s Multi-rate WDM Transmitter | Mitsubishi Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |