DataSheet.es    


PDF MC-7831 Data sheet ( Hoja de datos )

Número de pieza MC-7831
Descripción CATV 18 dB PUSH-PULL AMPLIFIER
Fabricantes CEL 
Logotipo CEL Logotipo



Hay una vista previa y un enlace de descarga de MC-7831 (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! MC-7831 Hoja de datos, Descripción, Manual

DATA SHEET
GaAs MULTI-CHIP MODULE
MC-7831
870 MHz CATV 18 dB PUSH-PULL AMPLIFIER
DESCRIPTION
The MC-7831 is a GaAs Multi-chip Module designed for use in CATV applications up to 870 MHz. This unit has
low distortion, low noise figure and return loss across the entire frequency band.
Reliability and performance uniformity are assured by our stringent quality and control procedures.
FEATURES
• Low distortion
• High linear gain
• Low return loss
GL = 18.0 dB MIN. @f = 870 MHz
ORDERING INFORMATION
<R>
www.DataSheet4U.com
Part Number
MC-7831
Order Number
MC-7831-AZ
Package
7-pin special with heatsink
(Pb-Free)
Supplying Form
25 pcs MAX./Tray
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: MC-7831
ABSOLUTE MAXIMUM RATINGS (TA = +25°C)
Parameter
Supply Voltage
Input Voltage Note
Operating Case Temperature
Storage Temperature
Symbol
VDD
Vi
TC
Tstg
Ratings
30
65.0
30 to +100
40 to +100
Unit
V
dBmV
°C
°C
Note In case of single tone
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
Document No. PG10090EJ04V0DS (4th edition)
Date Published December 2006 NS CP(N)
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
2001, 2006

1 page




MC-7831 pdf
MC-7831
The information in this document is current as of December, 2006. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
Data Sheet PG10090EJ04V0DS
5

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet MC-7831.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MC-7831(MC-7831 - MC-7833) GaAs CATV PUSH-PULL AMPLIFIERCEL
CEL
MC-7831CATV 18 dB PUSH-PULL AMPLIFIERCEL
CEL
MC-7832(MC-7831 - MC-7833) GaAs CATV PUSH-PULL AMPLIFIERCEL
CEL
MC-7832CATV 22 dB PUSH-PULL AMPLIFIERCEL
CEL

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar